This explosion proof LED light fixture is comprised of a 16 inch wide square LED light head mounted within a portable base stand fabricated from non sparking aluminum with a convenient carrying handle built into the top of the stand. The aluminum A-frame is powder coated with glossy blue finish for corrosion resistances and aesthetics. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Click Photos to Enlarge|
60° Beam Angle
125° Beam Angle Plug
140° Beam Angle Plug |
Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60° beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125° beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140° beam offers a very wide lighting pattern and is ideal for situations where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140° beam is great for situations that call for working in close proximity to lights such as in a paint booth.
The LED lamp produces 17,500 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75, which produces colors and details much more accurately than high pressure sodium or mercury vapor lamps. The copper free aluminum alloy lamp body is powder coated for added durability and resistance to corrosions. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Included with this LED light is 100` of 16/3 SOOW cable terminated in an explosion proof plug. We offer three cord cap options: 5-15 straight blade plug (standard USA wall plug), 5-20 twist lock plug (120V), and 6-20 twist lock plug (250V).
Field Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-PM-150LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.
This unit is universal voltage (not multi-tap) and operates on a range from 11-25 volts AC or DC. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. This portable explosion proof light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion.
Suggested Applications: This pedestal base stand explosion proof light is ideal for applications including tank cleaning, inspection and MRO, paint spray booths, construction, temporary offshore & marine lighting, portable rig lighting, grain processing, oil field lighting, fleet services and pit lights, and any application Class 1 & 2, Division 1 & 2 explosion proof or hazardous location environment requiring durable and quality lighting in a portable form factor.
|Made in USA Quality
||Superior LED Benefits|
1. Approved Class 1 Div 1-2 Class 2 Div I-2
2. Led lamp head requires no lamping.
3. Durable Base Mount constructed of copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 5000K Color Temperature and Color Rendering Index of 75
8. 17,500 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
1. 60,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Specifications / Additional Information
|EPL-PM-150LED-24V-100 Explosion Proof LED Light
Scroll Down to Purchase-
|Listing: United States
||Class 1 Division 1 & 2, Groups C and D|
|Lamp Type: Cree LED
||Class 2, Divisions 1 & 2, Groups E,F,G|
|Dimensions: 16"-W 14"-H 5"-D` Light head
||Class 3, Divisions 1 & 2|
|Weight: 30 Lbs
||T5 Temperature Rating|
|Voltage: 11-25 Volts AC/DC
||Certified to UL844 and C22.2 Standards|
|Total Watts: 150 watts
|Lamp Lumens: 17,500
||Paint Spray Booth Approved|
|Luminous Efficacy: 116.67 Lm/W
||IP67 Rated Waterproof|
|Lamp Life Expectancy: 60,000 Hours
||Multiple LED Driver Banks|
|Color Temp: 5000K, 4000K, 3000K
||80% Lumen Retention @ 50,000 Hours|
|Color Rendering Index: >75 CRI
|Beam Angle: 60° or 125°
|Beam Type: Wide Flood
|Operating Temp Range: -50°C to +65°C
|Mounting: Triangular Shaped Aluminum Base Stand
||Special Orders- Requirements|
|Materials: Aluminum Frame & Body, Glass Lens
||Contact us for special requirements |
|Finish: Powder Coated - Gloss Blue
||Toll Free: 1-800-369-6671|
|Power Factor: 0.992
|Wiring: 100` 16/3 SOOW Cord Explosion Proof Cord Cap
|Cord Cap: 5-15 Straight, 5-20 Twist or 6-20 Twist EXP Plug