Made in the USA
The Larson Electronics
LM-24-8-5S-FM-EW fixed mount 5-stage light mast with electric winch provides a
safe and effective way for operators to quickly deploy lights, security cameras
and other equipment to elevations up to twenty-four feet and collapse below
eight feet when fully collapsed. This crank up light tower features a
rotating boom that allows for 360° of rotation, electric winch for elevating the
mast and payload, and a removable mast head for storing mounted equipment when
not in use.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
telescoping five stage steel light mast from Larson Electronics’ is
designed to allow operators to quickly and safely deploy lighting,
cameras, and other electrical equipment in locations where this equipment
must be elevated to heights up to 24` for effective coverage. This light
boom can be extended to 24` for maximum area coverage and collapsed to 8` for
applications where a footprint smaller is required. This allows operators to
collapse the mast and leave it in the upright position during transit if desired
(depending on equipment mounted to the mast head).
tower is constructed of square steel tubing with a base section 5.92` in length
and 6" by 6" by 3/16" thick, lower section 6.04` in length and 5" by 5" by 3/16"
thick, middle section 6.19` in length and 4" by 4" by 1/8" thick, upper section
6.34` in length and 3" by 3" by 1/8" thick, and an top section 6.5` in length
and 2" by 2" by 1/8" thick. Each section has a 1` overlap. The mast is extended
to its full height using an included 2,500 lbs electric winch with 3/16"
galvanized steel cable.
LM series of towers are powder coated with glossy blue finish for corrosion
resistances and aesthetics. These light masts are typically mounted to trailers
or other stable surfaces via a 15" by 13" by 1/4" thick mounting base-plate
which has been drilled to accept six 9/16" anchor bolts. A 44" wide and 2" by 2"
by 1/4" thick mounting plate is attached to the upper section of the mast which
provides a strong and stable platform for light fixtures and equipment.
LM family of telescoping towers feature a proprietary mast guidance system,
which provide increased stability during high winds. When lowered to 9`, the
mast can withstand winds up to 125 mph. When elevated to its full upright
position, the mast can be rotated a full 360°. By loosening the T-Handle,
operators can rotate the mast with easy in either direction. The mast can be
positioned in any direction and locked back in place by re-tightening the
T-handle. The mast itself spins freely with easy, and can typically be rotated
with a single hand.
light tower weighs approximately 315 lbs, can easily support and lift 150 lbs.
The entire tower assembly is shipped via common freight
carrier and when shipped measures approximately 9 feet long, 4 feet wide, 3 feet
tall and weighs approximately 1500 lbs. Larson Electronics can custom tailor
these units to the customer’s requirements with longer sections and larger
mounting plates. For example, the LM-30-3S is another model that reaches to a
length of 30 feet, with a 14 foot lower section, 12 foot middle section, and a 8
foot upper section and a 4 foot wide upper mounting bracket. We also offer
a choice of either the manual 1,000 lbs hand winches included standard or
optional electric winches.
Suggested Applications: Temporary
lighting, construction sites, and security camera deployment. We can equip this
mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered
LED lights with comparable power, including the LED10WSA-160,
LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E.