Made in the USA
The Larson Electronics EPL-SL-3-LED Explosion Proof String Light set is Class 1 Division 1 Groups C and D approved and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.
This explosion proof string light set from Larson Electronics contains a total of three 10 watt work lights equipped with aluminum hooks and connected in series along 30 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated with a 1523P Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 15 foot tail section of main SOOW cord is included to allow ample length for connection to power sources.
10 Watt LED Bulb
Molded T Connector w/ Hook Ring
15` whip w/ EXP Plug
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge |
100 Watt Incandescent Bulb
With the EPL-SL-3-LED
This unit incorporates three explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space.
This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277V AC or 11-25V DC, please choose your configuration below.
|Stringer Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
(8hs/day @ 11c/kWh)
|Made in USA Quality
1. Chemical and abrasive resistant cord
2. Explosion Proof.
3. Total of (3) 10 watt LED Lamps.
4. Non-sparking aluminum construction.
5. Class 1 Div 1 Class 2 Div1
6. Red and gray paint finish
7. 120-277V AC or 11-25V DC Operation
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
100 watts of LED illumination
Non-sparking aluminum housings
Light weight mold T Juctions
Cast aluminum guard prevent lamp or globe damage
Temptered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable
Specifications / Additional Information
Scroll Down to Purchase- Same Day Shipping on This Light!
|UL Listing: United States
||Class 1, Divisions 1 & 2, Groups C, D |
|Dimensions- Each Lamp: L-16.5" Diam-5"
||Class 2, Divisions 1 & 2, Groups, F, G |
|Total Watts: 30
||Class 1, Zone 1, Group IIB|
|Single Lamp Watt: 10 watts
|Voltage: 120-277V AC or 11-25V DC
|Amps: 0.42 @ 120V AC
|Mounting: Handheld / Hanging via Aluminum Hooks
||Special Orders- Requirements|
|Wiring: 30` 14/3 SOOW Cable - 15A EXP Plug
||Contact us for special requirements |
|Total Length: 45`
||Toll Free: 1-800-369-6671 |
|Single Lamp Weight: 6 lbs
|Total Weight: 35 lbs