Made in the USA
The Larson Electronics EPL-BS-70-50-HR Hazardous Area LED Work light with it`s explosion proof cord reel are both UL Listed Class 1 Division 1 & 2. This unit is rated for use in wet and marine environments. The spun aluminum mount and metal halide lamp used with this unit provide operators with excellent power and efficiency coupled with high versatility and ease of use.
***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***
The EPL-BS-70-50-HR explosion proof light provides 13,000 square feet of work area coverage with 32,000 lumens of light output. The 70 watt metal halide lamp on this unit produces illumination equivalent to typical 400 watt halogen lamps while drawing only 70 watts at .58 amps. The metal halide lamp runs cooler than 400 watt halogen lamps, resulting in an easier to handle unit and less heat in the workspace. The metal halide lamp in this unit produces a brilliant flood pattern of light that is ideal for high vibration environments and general illumination in any confined space area (silo, tank or manhole).
The non sparking reel contains this unit’s 50 feet of SOOW Cord for convenient cord management. This explosion proof reel and metal halide pedestal mount unit can be installed and used within the hazardous location area, making it ideal for hazardous work areas where a ready source of easily managed lighting is desired. The high light output, easy operation, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work and inspection activities.
This explosion proof light fixture is comprised of a 70 watt light head with a dual ended metal halide lamp mounted atop a 12 1/2" dia. circular base fabricated from non sparking spun aluminum and includes a convenient carrying handle mounted to the top of the light head. The aluminum base on this unit has three pre-drilled 0.437" diameter holes to allow the fixture to be permanently mounted to flat surfaces for maximum stability. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. The 50 foot long Class 1, Division 1 rated SOOW 16/3 AWG cord and explosion proof slip-ring housing help this unit to achieve approval for use in environments containing flammable vapors and combustible dusts.
The lamp assembly includes a 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The metal halide lamp has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 2500+ hours of life, providing longer service life than typical halogen lamps.
|Made in the USA Quality||Metal Halide Benefits|
1. High Efficiency Metal Halide lamp.
2. 70 Watt Lamp Compares to 400W Halogen.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass Lens.
5. Copper Free Shell, Covers and Sealed Fittings.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. Spun Aluminum Base.
9. 2500+ Hour Lamp Life.
10. UL Listed for Marine Environments.
11. Explosion Proof Cord Reel
12.Spring activated reel ratchet
13. 4-roller adjustable cable guide
14. NTRL Listing (Cord Reel) - Class I, Division 1 & 2 Group D; Class II, Group G.
15. NTRL Listing (Cord Reel) - Class I, Zone 1, AEx d IIB.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.