Made in the USA
The Larson Electronics HAL-24-2L-VISUV-FLGM Hazardous Area Visible and Ultraviolet Light Fixture is U.S./Canada UL Listed Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occassionally encountered.
The HAL-24-2L-VISUV-FLGM fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluroescent light and a good choice for use in applications where space is at a premium. This fixture is T4A temperature rated and comes standard with one visible T8 lamp and one ultraviolet T8 lamp. Seperate leads for each bulb allows operators to switch between visible and ultraviolet light. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-24-2L provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present.
This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our HAL-24-2L-LED-FLGM LED light fixture is both U.S. and Canada UL Listed.
Flange Mount Brackets: The HAL-24-2L-VISUV-FLGM is a flange mount fixture to allow drop in mounting.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. 1/2" or 3/4", threaded access hole for wiring conduit.
7. Units can be wired end to end in series.
F17-T8– 1325 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color.
Specifications / Additional Information
|HAL-24-2L-VISUV-FLGM Hazardous Area
Scroll Down to Purchase-
|UL Listing: United States - Canada
||Class 1 Division 2, Groups A, B, C and D |
|Dimensions: W-7" L-25.5" H-6 1/8"
||UL 595 Outdoor Marine Type (Saltwater) |
|Weight: 17 Lbs
||UL 1598A Marine Type |
|Total Watts: 32 watts
||California Title 24 Compliant|
|Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
|Low Voltage (Optional): 12-24V DC
|LED Lamp Life Expectancy: 50,000 Hours
|Operating Temp Range: T4A rated -30 C to 85 C
|Beam Angle: 150 degrees
||Special Orders- Requirements|
|Color Temp: 4100K + UV
||Contact us for special requirements |
||Toll Free: 1-800-369-6671|
|Wiring Hub: 1/2" or 3/4" threaded
|Warranty: YES- 3 Years*
|U.L Approval: U.S Certificate Canada Certificate