Made in the USA
The EPLC2-150HPS 150 watt high
pressure sodium hazardous area light fixture from Larson Electronics produces
15,000 lumens of light capable of illuminating an area approximately 6,750
square feet in size. Weather proof and U.L. listed for marine use, this metal
halide fixture is available in pendant, ceiling or wall mount versions and
is an ideal choice for industrial applications and use in enclosed
durable EPLC2-150HPS high pressure sodium fixture from Larson
Electronics is approved for use in wet marine locations and is ideal
for industrial applications, confined spaces, hazardous work areas and
Class 1 DIV 2 areas where a powerful and durable floodlighting solution is
needed. The lamp housing is weatherproof and constructed of non-sparking
aluminum featuring a heavy duty, mogul base lamp socket, tempered and heat
resistant glass dome and cast aluminum dome guard. This lamp carries a long lamp
life rating of 24,000 hours and a fast hot restrike capability, reducing
downtime and replacement costs.This unit is available in pendant, ceiling
and wall mount versions and includes stainless steel exterior hardware for
added resistance to the salt water conditions found in marine
This hazardous area light is U.L.
rated Class 1 Division 2, Groups A, B, C and D and UL1598 listed for outdoor
marine use. The integral multi-tap ballast is protected within the weatherproof
housing and can be operated on 120, 208, 240 and 277 Volts. This lamp is
suitable for use in confined spaces and areas where wet marine conditions exist.
The multi-purpose floodlight design of this fixture makes it a popular choice
for industrial and marine applications regardless of whether the locations are
designated hazardous or not. The non sparking aluminum fixture body is
electrocoated for durability and corrosion resistance while a tempered glass
globe protected by an aluminum globe guard provides lamp security against
impacts and the elements.
Wiring: This light is highly durable and produces high
15,000 lumen light output in a wide flood pattern. Wiring is through a
convenient ¾ inch NPT conduit entrance. Three-conductor No. 14 cable (with 90° C
minimum insulation) is recommended for making electrical connections. Wiring is
accomplished through the wiring enclosure provided on the fixture. The box is
provided with a size 3/4-in. NPT threaded conduit opening. Wiring methods must
comply with NFPA 70 (The National Electrical Code).
Suggested applications: ship yards, boat yards,
plants, tanks, vessels, fuel cells, barges and oil field
|Made in the USA
||High Pressure Sodium
1. High Efficiency High Pressure Sodium
2. 100 Lumens per Watt.
3. Rugged Die Cast Aluminum Lamp
4. Shock Resistant Tempered Glass.
5. Heavy Duty Gasket.
Socket: Mogul Base.
8. Corrosion Resistant Materials.
9. Stainless Hardware.
10. UL Approved for Marine Environments.
1. Long lamp life.
2. High efficiency and low
amp draw after initial startup.
3. High durability and reliability.
High output and very good color rendering.
5. Vibration and shock
Specifications / Additional
Location Light Fixture
Scroll Down to
Type: High pressure sodium
||Class 1, Division 2 Groups A,B,C,D
|Lamp Dimensions: 21 1/2"-L, 13"-OD,
||Class 1 Zone 2 -Groups IIA, IIB, IIC |
|Ballast: Pulse Start / Multi-Tap
||Class 2, Division 1 & 2, Groups E,F,G |
||NEMA 4x, IP66, NEMA 9 |
|Lumens Per Watt: 100
||UL 1598 Marine|
|Voltage: Multi-Tap -120, 208, 240 and 277 Volts
||Suitable for Wet Locations|
|Mounting: 3/4" Ceiling, Wall or Pendant mount. 1-1/4"or
Class1 DIV 2 Groups A,BC.D
|Wiring: 3/4 inch Conduit
||Contact us for special requirements |
||Toll Free: 1-800-369-6671|