This underwater boat light is submersible to six feet and contains 12 LEDs producing a total of 2,700 lumens while drawing only 30 watts at 3.5 amps from a standard 12 volt electrical system. This unit can be operated with voltages ranging from 10 to 30 VDC and is constructed of stainless steel for durability and resistance to corrosion. The entire unit measures only 3.94 inches in diameter by 0.75 inches thick, making it very low profile and easy to mount unobtrusively on the hull below the waterline. This light contains an intelligent microprocessor that controls operation of the light modes and there is no additional hardware or drive circuits needed to complete installation.
This underwater LED light has three operation modes: cross fade, solid, and strobe. The white/blue combination will have four modes, with a solid white and solid blue. Please note, the cross fade and strobe functions are designed to randomize color patterns. These lights are not designed to be synchronized.
Mounting: Mounting is accomplished with three through holes and screws for securing the light to the hull. A 1/2 inch base extension in the center of the light containing the wiring connections passes through the hull for secure through surface wiring. In boating applications the operator can drill a 1/2 inch hole in the hull and insert the base mount, passing the base extension through the hull. The 2 wire installation can then be done inside the hull. The wires or points of ingress around the wire are thus not exposed to the water and protected against chafing or damage from rubbing against the edges of the mounting hole. We also carry an alternative underwater LED unit that is submersible to 60 meters you can view here.