Made in Texas
The Larson Electronics HALP-48-2L-SSPM Stainless Steel Hazardous Area Pole Mount Fluorescent Light Fixture is U.S./Canada listed for Class 1 Division 2 Groups A, B, C and D, UL 1598A, T4C temperature rating, and is specifically designed to handle the rigors of wet and corrosive marine environments. This hazardous location light fixture features a pole mounting system and stainless steel hardware for use in corrosive and marine environments.
The HALP-48-2L-SSPM hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. The HALP-48-2L-SSPM stainless steel pole mount hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Eight corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. Two stainless steel bar clamp mounting brackets allow operators to secure the light fixture to existing light poles.
The HALP-48-2L-SSPM is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. This fixture also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This lamp offers the extreme durability and high efficiency in a proven hazardous location fixture design, making it a reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. Click here to read the NEC description for explosion proof and hazardous locations.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
NOTE ON LAMPS: This fixture comes equipped with two T5HO, T8, or T12HO fluorescent lamps. The F54-T5/850/HO 54 Watt lamps produce 5,000 lumens per bulb for 20,000 lumens per fixture, a 5000 or 4100 Kelvin color and a 20,000 hour rated service life. The F32-T8/841 32 watt lamps produce 2950 lumens per bulb for 5900 lumens per fixture, a 4100 Kelvin color and a 24,000 hour rated service life. The F48-T12/HO 60 watt lamps produce 4050 lumens per bulb for 8100 lumens per fixture, and a 12,000 hour rated service life. The HALP-48-2L has an electronic universal voltage ballast and operates on a range of voltages from 120V to 277V AC 50/60Hz including: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ.
|Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 220V AC
|Amp Draw @ 240V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
||5000K / 4100K
|Operation cost per year
(12hs/day @ 12c/kWh)
Click Photo to Enlarge |
This pole mount fixture is equipped with two stainless steel bar clamps to allow operators to secure the light fixture to existing poles. This two-piece clamp provides easy installation, and the fixture is equipped with either a 1/2" or 3/4" NPT wiring hub. All mounting hardware is stainless steel or non-metallic for corrosion resistance. We offer this pole mount system to be installed on standard 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", and 3" pole sizes. Please choose your pole size below and our mounting system will fit over the OD of your pole size. If you do not see your pole OD below, please contact us. Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Suggested Applications: The HALP-48-2L-LED-SSPM is designed for marine, wet, damp locations where corrosion resistant fluorescent lights are required or are already present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
|Made in USA Quality
1. Each unit dialectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Stainless steel mounts attached at each end of the fixture enables it to be simply secured to customer provided round poles.
3. Fixture housing constructed of glass fiber reinforced polyester.
4. Relamping done via 8 stainless steel snap locking latches, which enable the operator to remove the door and access the lamps.
5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.
6. 1/2" or 3/4" threaded access hole for wiring conduit.
F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)
F54-T5/841/HO - 54 watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)
F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color (Suffix –T12HO)
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)
Specifications / Additional Information
|HALP-48-2L-SSPM Hazardous Area
Scroll Down to Purchase-
|UL Listing: United States - Canada
||Listed for United States & Canada|
|Dimensions: 49.731"-L x 7.205"-W x 7.5"-H
||Class I, Division 2, Groups A, B, C & D|
|Weight: 9 Lbs
||Class II, Division 2, Groups F, G |
|Voltage: Universal 120-277VAC 50/60 Hz
||Listed UL 844|
|Total Watts: 108W (T5HO, 64W (T8), 120W (T12HO)
||Listed UL 1598A Marine Type|
|Total Lumens: 10,000 (T5HO), 5,900 (T8), 8,100 (T12HO)
||Listed to Canadian Standards|
|Lamp Life Expectancy (Hrs): 20,000 (T5HO), 24,000 (T8), 12,000 (T12HO)
||Meets US Coast Guard specifications.|
|Luminous Efficacy (Lm/W): 95.59 (T5HO), 92.19 (T8), 67.5 (T12HO)
||California Title 24 Compliant|
|Color Temp: 5000K (T5HO/T8), 41000K (T5HO/T8), 4000K (T12HO)
|Beam Angle: 160° Horizontal x 116° Vertical
||Corrosion Resistant Stainless Steel Hardware|
|Operating Temp Range: -30°C to +70°C*
||Non-Metallic Housing Body & Lens|
|Operating Temp Rating: T4A Rated
||Quick Release Draw Latches|
|Minimum Operating Temp: -30°C
||Removable Lens for Ease-of-Access Serviceability|
|Maximum Case Temp: +90°C
||Stainless Steel Pole Mount System|
|Housing Material: Polyester/Fiberglass Blend
||Made in the USA|
|Lens Material: Acrylic
|Mounting: 2-Piece Stainless Steel Bar Clamp Pole Mount
||Special Orders- Requirements|
|Mounting Diameters: 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", or 3"
||Contact us for special requirements |
|Wiring Hub:1/2" or 3/4" NPT
||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*
|U.L Approval: U.S Certificate Canada Certificate
|*Temperatures above +65° C will diminish ballast life from 5 years to 3 years