Made in the USA
The Larson Electronics EPL-SL-10-LED-E2E Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.
Click here to see the Incandescent version of this light
This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and connected in series along 100 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated with a 20 amp 5-20 or 6-20 Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main SOOW cord is included to allow ample length for connection to power sources. An explosion proof outlet at the end of the backbone provides the ability to conenct multiple units end to end, allowing operators to daisy chain multiple stringers together along the jobsite.
100FT of 14/3 SOOW Explosion Proof Cord
Click Photo`s to Enlarge
Explosion Proof Daisy Chain Outlet
100 Watt Incandescent Bulb
Molded T Connector w/ Hook Ring
With the EPL-SL-10-LED-E2E
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space.
Wiring/Power: This explosion proof string light is equipped with an explosion proof outlet 5` from the last junction point, allowing operators to connect multiple units together end to end. Operators can daisy chain up to 15 units end to end in 120 volt or 30 units in 240 volt configurations. Up to three units in 24 volt AC/DC can be connected end to end.
|Stringer Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
(8hs/day @ 11c/kWh)
This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below.
|Made in USA Quality
1. Federal Spec Cord.
2. Explosion Proof.
3. Total of (10) 10 watt LED Lamps.
4. Non-sparking aluminum construction.
5. UL Class 1 Div 1 Class 2 Div1
7. 120-277V AC or 12-24V DC Operation
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
10. Daisy Chain Connections.
100 watts of LED illumination
Non-sparking aluminum housings
Light weight mold T Juctions
Cast aluminum guard prevent lamp or globe damage
Temptered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable
Specifications / Additional Information
Scroll Down to Purchase- Same Day Shipping on This Light!
|UL Listing: United States
||Class 1, Divisions 1 & 2, Groups C, D |
|Dimensions- Each Lamp: L-16.5" Diam-5"
||Class 2, Divisions 1 & 2, Groups, F, G |
|Total Watts: 100
||Class 1, Zone 1, Group IIB|
|Single Lamp Watt: 10 watts
|Voltage: 120-277V AC or 12-24V DC
|Amps: 0.84 120V AC
|Mounting: Handheld / Hanging via Aluminum Hooks
||Special Orders- Requirements|
|Wiring: 100` 14/3 SOOW Cable - 20A EXP Plug - EXP Outlet
||Contact us for special requirements |
|Total Length: 125`
||Toll Free: 1-800-369-6671 |
|Single Lamp Weight: 6 lbs
|Total Weight: 70 lbs