Explosion Proof Light - 70 Watt Metal Halide - 220 Volts - Magnetic Base Stand - Class 1 & II Div 1

Made in the USA

The EPL-BS-70-220V-100-6XMB Explosion Proof Metal Halide Light from Larson Electronics is U.L. approved Class 1 & 2, Division 1 & 2 and is rated for use in wet and marine environments. The magnetic aluminum base mount and metal halide lamp used with this unit provide operators with excellent power and efficiency coupled with high versatility and ease of use.

The EPL-BS-70-220V-100-6XMB explosion proof light provides 7,000 square feet (20,000 sf for 150W HPS) of work area coverage with 5,500 lumens (16,000 with HPS) of light output. The 70 watt metal halide lamp (or 150 watt High Pressure Sodium) on this unit produces illumination equivalent to typical 400 watt halogen lamps while drawing only 70 watts at .58 amps. The metal halide lamp runs cooler than 400 watt halogen lamps, resulting in an easier to handle unit and less heat in the workspace. The metal halide lamp in this unit produces a brilliant flood pattern of light that is ideal for high vibration environments and general illumination in any confined space area (silo, tank or manhole).

While the metal halide is the best choice for most areas, the 150 watt High Pressure Sodium bulb is ideal for dust and wet area locations, since the HPS light penetrates those airborne particles well. Choose your lamp choice below when ordering.

This explosion proof light fixture is comprised of a 70 watt light head with a dual ended metal halide lamp mounted atop a 12 1/2" dia. circular base fabricated from non sparking spun aluminum and includes a convenient carrying handle mounted to the top of the light head. The aluminum base on this unit has three 200lb magnets and three 100lb magnets for mounting to any metallic flat surfaces for maximum stability. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this unit is 100 feet of SOOW cord terminating in a 20 amp, 250V 6-20P Class 1 Division 1 explosion proof straight blade plug.

The lamp assembly includes a 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The metal halide lamp has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 10,00+ hours of life, providing longer service life than typical halogen lamps.

Cross for Chambers Power Products FS1570MH-220V.

Same Day Shipping Available! Scroll Down to Purchase-