Low Profile Surface Mount Explosion Proof Fluorescent Light - 20,000 Lumens - Paint Booth Approved
Part # EPL-48-216 Price: $1,020.00
Spec Sheet Hoja de Especificaciones
Dimensions Manual Beam Info
IES STEP EASM
Made in the USA
The Larson Electronics EPL-48-216 Explosion Proof Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 1 and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The unit carries a T6 temperature rating, it is also approved for Paint Spray Booths.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS EXPLOSION PROOF LIGHT FIXTURE*
The EPL-48-216 fixture is a 4 foot long, 4 lamp, UL listed Class 1 Division 1 and Class 2 Division 1&2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with four T5 high output fluorescent lamps. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-216 provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Pendant Mount (Optional) |
Click Photo to Enlarge
3 Conduit Positions
Click Photo to Enlarge |
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)
F54-T5/841/HO - 50 watt, 4450 lumens per bulb, 20,000 hour life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)
Specifications / Additional Information
|EPL-48-216 Explosion Proof Fluorescent Light Fixture
Scroll Down to Purchase-
|Listing: United States - Canada
||Class I Division 1, Groups C and D T6|
|Dimensions: W-11.25" x L-52" x H-8.5 "
||Class I Division 2, Group A,B,C,D|
|Weight: 70 Lbs
||Class II, Division 1 & 2, Groups E,F,G|
|Voltage: Universal 120-277VAC 50/60 Hz
||UL 595 Marine Type (Saltwater)|
|Total Watts: 216W
|Total Lumens: 20,000
||UL 1598 Marine Type|
|Lamp Life Expectancy (Hrs): 20,000 (T5HO)
||Certified Canadian Standards|
|Luminous Efficiency (Lm/W): 95.59 (T5HO)
||Listed for Paint Spray Booths|
|Color Temp: 5000K or 41000K
|Beam Angle: 150°
||California Title 24 Compliant|
|Ambient Operating Temp Range: -20°C to +70°C
||IP67 Rated - Waterproof|
|Operating Temp Rating: T6 Rated
||T6 Temperature Rating|
|Minimum Operating Temp: -30°C
|Maximum Case Temp: +90°C
||Approved for Confined Spares|
|Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free
|Lens Material: Hardened Borosilicate Glass Tubes
|Gasket Material: Buna Rubber O-Rings
||Special Orders- Requirements|
|Mounting: Surface Standard - Pendant Optional
|Wiring Hub: 1/2" NPT
||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*
|U.L Approval: U.S Certificate Canada Certificate
|*Temperatures above +65° C will diminish ballast life from 5 years to 3 years
9.38 / 10
22433 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
|02/12/18||How Does Color Temperature Affect Mood, Motivation and Productivity?|
Advancements in commercial lighting research have led to ground-breaking conclusions about the way certain characteristics of light beams affect mood and productivity in the workplace. Such findings can help businesses improve output and ensure employees are provided a conducive environment to complete demanding tasks.
|08/16/16||How Much Light is Enough Light|
Lighting choices vary, depending on the needs of the applicable location and personal preferences of individuals in the area. A “one size fits all” solution is rarely available when determining the lighting requirements of multiple environments. For example, lighting configurations for an office may differ, compared to a packaging warehouse. Even if the two facilities were the same size, the type of work being carried out in the buildings dictate the properties or characteristics [...]
|02/26/16||Understanding Explosion Proof Lighting Classes Divisions and Groups|
The concept of explosion proof light ratings can be confusing to understand. Hazardous workplace conditions can vary greatly and that means that a comprehensive rating system becomes necessary in order to ensure a safe work environment. [...]
|02/16/16||Lumen vs Foot-Candles – Which Is More Accurate for Measuring Illumination?|
When a customer is looking for lights, the most common question posed is “how bright is this light?” As lighting technology improves, the standard measurements of illumination aren’t always the most accurate in calculating a light’s output. Understanding how each rating is determined will help you choose the best fixture for an application. [...]
|01/28/14||The Future of Lighting: No More Lamp Servicing or Maintenance?|
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
|12/31/13||Not Interested in LEDs? Two High Bay Lighting Alternatives|
While LEDs are still making inroads into high bay applications, fluorescent and HID systems already have a proven track record of effectiveness, providing an extra degree of security for those as yet unprepared to make the jump to solid state lighting. Follow along as we look at some of the improvements traditional high bay systems have undergone and how this affects their overall performance. [...]
|11/15/13||LED versus Fluorescent: Lumens per Watt is Only Part of the Story|
Today it is commonplace to find T8 fixtures producing on the order of 80 to 100 lumens per watt of output, putting fluorescent lighting at the top of the efficient lighting ratings in terms of lumen per watt efficiency. However, this does not tell the whole story, and other factors come into play which affect the real world efficiency of fluorescent lighting and brings it a little more down to earth. [...]