Standard handle. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) Phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware.
25A at 12V, 15A at 24V, and 10A at 36V DC.
Moisture- and dirt-resistant. PVC coated and sealed with an O-ring seal in the stem. Up: Off, Down: Mom On.
Two 8" (203.2mm) leads.
Durable silicone rubber bonded to a standard 15/32" -32 thread nickel plated brass hexnut. When the nut is tightened to the stem of a toggle switch, the rubber forms an O-ring seal with the panel. Full boots completely cover a standard 11/16" (17.5mm) handle. Boot seals protect switches from moisture and dirt; colored boots provide color-coding for ready identification of switches.
Switch Type - Toggle
Description - Toggle Switch, Plasticized, Sealed Bushing
Circuitry - SPST
Electrical Rating - 25A at 12VDC
Contacts - Silver
Housing - Black plastic, Plated steel cap
Up position - Off
Center position - None
Down position - Momentary On
Terminals - (2) 8" wire leads
Handle material -Nickel-plated brass
Handle type - Standard
Handle size: - 11/16" (17.46mm) Long
Mounting hardware - Black finished face nut & plated hex nut
Mounting stem material - Nickel plated brass
Mounting stem dimmensions - 15/32" -32 thread, .46" (11.90mm) Long
Mounting hole dimension - 15/32" (11.90mm) Panel Hole
Panel thickness - Up to 1/4" (6.35mm) thick
For use with our larger lights, such as the LEDLB-160 and the LEDLB-200X2E lights, two switches are required, one for each power source.