Buy American Compliant
The Larson Electronics LEDP10W-60ET-F-M-110V LED Machine Light offers high light output and extreme durability combined with a versatile magnetic mounting system. This LED light emitter bar light runs on 110VAC provided by an included inline power transformer. The 110 VAC capability of this light provides an extremely rugged lighting solution that is ideal for use in industrial and manufacturing applications such as machine vision system lighting, industrial machining illumination, blasting lighting and mining operations.
The LEDP10W-60ET-F-M-110V LED light bar from Larson Electronics produces a 160` long by 120` wide light beam with 5160 lumens of bright light. 6 CREE XLamp MC-E® LED Emitters containing ten watt LEDs producing 860 lumens each are arranged in a single row and paired with high purity 40 degree optics to produce an evenly distributed output which is much wider than the alternate spot beam, making this unit ideal for work area applications. We also offer these units in a 10 degree optic versions which produce a tightly focused spot beam with limited spread or light spillage. These LED light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDP10W series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This magnetic base allows fast and easy setup of this light on vehicles and equipment and will hold the fixture in place at speeds up to 80 mph provided the mount is properly affixed and secure.
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 46 Volts. However, with our new integrated inline transformer design, the fixture can now be operated with standard 110 VAC power found in standard wall outlets. Essentially, this means the operator can use this LED light bar anywhere a wall plug in is available or, by disconnecting the step down transformer, he/she can power this LED light emitter bar from any vehicle, equipment, ATV or boat electrical system. You do not need to anything special to operate these light bars in their multi-voltage 9-46 Volt configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6` of additional SOOW cord, for a combined total length of 11` from the converter to the fixture. In this particular light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the fixture. If operator decides he/she would like to run off 9 - 46 VDC, all he/she has to do is disconnect from said transformer.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDP10W-60ET-F-M-110V 35° Flood Beam
LEDP10W-60ET-F-M-110V 10° Spot Beam|
Durability: The LEDP10W-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Magnetic Mounting: The 2, 100 lbs magnet mounting design on the LEDP10W-60E-F-M-110V allows for easy fixture placement and removal. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
|Vin min (V) = 9
||toff (us) = 2.9|
|Vin nom (V) = 12
||R1 (kohm) = 50.2|
|Vin max (V) = 50
||L1 (uH) = 3.0|
|Vo min (V) = 6.5
||L-Pk (A) = 2.9|
|Vo nom (V) = 6.8
||L-rms (A) = 2.9|
|Vo max (V) = 7
||Ipk (A) = 2.5|
|I-LED (A) = 2.2
||R2 (ohm) = 0.10|
|Efficiency = .85
||I-FET (A) = 2.2|
|fsw nom (kHz) = 150
||fs min (kHz) = 77|
|Ts nom (us) = 6.666667
||fs max (kHz) = 301|
||= 36~37Khz @ 12V|
|Amplitude of pulse width-
|Outside: External dimmer-
||= 500Hz |
|Inside : Current sensing from-
||77KHz at 12V to 300KHz at 50V |
Specifications / Additional Information
|LEDP10W-60ET-F-M-110V LED Light Bar
||LEDLB LED Features|
Scroll Down to Purchase-
|LEDs: 6 CREE XLamp MC-E® 10 Watt LED Emitters
||CREE XLamp MC-E® 10 Watt LED Emitters|
|Dimensions: 11"-L 4.5"-H 3.56"-D
||LEDs Driven At 80% |
||-40 C~ +80C Operating Temp Range|
|Voltage:110 with included transformer- 9-42 VDC Without transformer
|Weight: 6.4 Lbs
||70% Lumen Retention @65,000 hours|
|Lighting Configuration: 10° Spot or 35° Flood
||LED Chip Op Temp -40C to +125C|
|Mounting: 2, 100lbs. Magnetic Mounts
||IP68 Rated Waterproof to 3ft|
|Wiring: Deutsch IPD / LADD DT04-2P connector
|Amps: 5 (on 12 volts) 2.5 (on 24 volts)
||Special Orders- Requirements|
|LED Light Color: 6000K
||Contact us for special requirements |
|LED Life Expectancy: 50,000 hours
||Toll Free: 1-800-369-6671|
|Optics Efficiency: 90%
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.