UL Listed LED Blasting Light - 40, 3-Watt LEDs - 120VAC - IP68 Rated - Magnetic Mount
Part # BL40-LED Price: $1,211.26
Buy American Compliant
The Larson Electronics BL40-LED LED blasting light offers high light output and extreme durability combined with versatile magnetic mounting and power options. This IP68 rated LED blasting light is waterproof to three meters and produces 7,200 lumens while drawing only 120 watts of power @10 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and an included inline transformer allows operation with common 120VAC household current as well.
The BL40-LED LED blasting light from Larson Electronics produces a flood of light 375 feet long by 260 feet wide with 7,200 lumens of bright light while drawing only 120 watts @10 amps from a 12 volt electrical system. Optional 10 degree spot beam versions are available that produce a beam 1350` long by 330` wide. Forty Edison Edixeon® Emitters containing CREE EZBright® three watt LEDs producing 180 lumens each are paired with high purity 35 degree optics to produce a powerful flood of light ideal for work in blasting applications.
These LED blasting lights are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. These units are constructed of extruded aluminum and feature heavier housings, rubber isolated standard mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, and the harsh conditons of blasting operations. This light is equipped with a 300lbs grip magnetic mount base and a 50 foot cord to provide ample mounting versatility. This magnetic base allows fast and easy setup of this light and will hold the fixture in place even under high vibration conditions.
This low voltage light is equipped with a DCP-11-DP inline transformer which allows these units to be operated with standard 120V-277V AC current commonly found in wall outlets. This unit can also be unplugged from the transformer and run directly from 9-42 volts DC, allowing it to be operated from any vehicle or equipment`s electrical system. We also offer this light with an amber light output to enhance the penetration in low visibility (due to steam or particulates) environments. We also offer the unit with green light output or standard white. Please choose your color below when ordering.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical. This particular blasting light is equipped with our DCP-11-DP transformer which allows operators to simply plug the unit into any standard wall outlet equipped with 120-277VAC, or they can unplug the transformer and connect the light directly to a 9-42VDC power source.
BL40-LED 35° Flood Beam
BL40-LED 10° Spot Beam|
Durability: This series of LED blasting lights from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens covers can be peeled off and replaced easily.
Mounting: The three 100 lbs magnets and trunnion mounting design on the BL40-LED LED blasting light allows for easy fixture placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be attached or removed as needed.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. This particular blasting light is equipped with our DCP-11-DP transformer which allows operators to simply plug the unit into any standard wall outlet equipped with 120-277VAC, or they can unplug the transformer and connect the light directly to a 9-42VDC power source.
Specifications / Additional Information
|BL40-LED LED Blasting Light
||LEDLB LED Features|
Scroll Down to Purchase-
|LEDs: 40 Edixeon® 3 Watt LED Emitters
||Edixeon® 3 Watt LED Emitters|
|Dimensions: 22"-L 3"-H 3.56"-D
||LEDs Driven At 80% |
||-40 C~ +80C Operating Temp Range|
|Voltage: 9-42 VDC
|Weight: 11 Lbs
||70% Lumen Retention @65,000 hours|
|Lighting Configuration: 10° Spot or 35° Flood
||Ambient Op Temp -40C to +125C|
|Mounting: 300lbs Grip Magnetic Base/Adjustable Trunnion
||IP68 Rated Waterproof to 3 Meters|
|Wiring: 50ft Cord, Inline Transformer with Standard Plug
|Amps: 10 (on 12 volts) 5 (on 24 volts)
||Special Orders- Requirements|
|LED Light Color: 6000K
||Contact us for special requirements |
|LED Life Expectancy: 50,000 hours
||Toll Free: 1-800-369-6671|
|Optics Efficiency: 90%
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
|Lux@ 10` Increments: 10` - 7,500, 20` - 2,200, 30` - 1,010, 40` - 560, 50` - 370, 60` - 262, 70` - 190, 80` - 145, 90` - 115, 100` - 93, 110` - 77
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
9.38 / 10
22430 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
|02/05/18||Recommendations for Industrial Product Certification (NRTLs)|
For industrial manufacturers, product testing and certification are essential to releasing a product that is reliable, high quality and in demand by businesses or consumers with stringent requirements. Products that require certification from a Nationally Recognized Testing Laboratory (NRTL) include consumer appliances for safety, industrial equipment and components (usually for durability, safety and code compliance) and electrical equipment. [...]
|08/31/13||LEDs and the Changing Lighting Industry|
Rather than turning materials incandescent through heating as is the case with wire filament bulbs and fluorescent lamps, the LED emits light through a process called electroluminescent whereby electrical energy passed through semi-conducting materials causes the materials to emit energy as photons or, light energy. This process is extremely efficient, powerful, and versatile, and the solid state design of the LED means no more glass to break, no filaments to burn out, and no toxic materials use [...]
|01/28/13||LED Lights, Lighting of the Future|
The newest and most well regarded entrance into the lighting markets has been the LED. LEDs represent an entirely new way of producing illumination that bears very little resemblance to traditional forms of lighting. With LEDs, nothing is burned, there are no gases and no glass, and the energy to light conversion rate is much much higher. The energy to light conversion rate is so much higher in fact, that LEDs now produce on the order of 80% more light per watt than the incandescent bulb. [...]
|05/21/12||NEMA Enclosure Ratings Basics for Electrical Equipment|
NEMA ratings are guidelines published by the National Electrical Manufacturers Association intended to provide a homogenous system of rating electrical enclosures according to their various design parameters. NEMA ratings encompass a wide area of subjects such as protection against contact with internal parts, resistance to internal contamination from fluids, resistance to icing and external damage, and the enclosures suitability for use in various environments. [...]
|03/16/12||Reducing the Financial and Environmental Impact of Lighting with LEDs|
LED lighting currently holds the best potential for achieving the energy efficiency standards now mandated by the federal government without placing an increased burden on the management of toxic wastes. Although there remains some skepticism as to whether or not LEDs can effectively fill the illumination roles currently held by HID and fluorescent technologies, real world applications are proving that not only do LEDs have the potential to do so, they are in many cases a superior alternative. [...]
|08/17/11||Modern Lighting: Why LEDs are Leading the Way|
Because of their solid state design, low power requirement, high efficiency and durable construction, LEDs offer a wide range of improvements over traditional light sources. Able to produce light in specific wavelengths, containing no gases, filaments or glass, and much smaller than traditional light sources, LEDs are a radically different way to produce light and as such, have much different properties than the traditional light bulb. [...]