Made in Texas
The EPSLED-80 Explosion Proof LED Strobe Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, paint spray both approved, and produces 4 flashes per second. Water proof and IP67 rated , this LED equipped light is pendant, ceiling, or wall mounted, and available with several color and voltage options.
The powerful and durable EPSLED-80 explosion proof LED strobe light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable strobe light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with red, blue, green, amber, purple and white flash colors as well as different voltages including- 120 Volts 60hz AC, 277 Volts AC, 24 Volts DC, and 12 Volts DC.
Click Photo to Enlarge |
This hazardous area strobe light carries a T3C temperature rating and is U.L. approved Class 1, Groups C and D, Class 2, Groups E and F, and Class III, Groups E, F and G. This strobe light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through or 3/4" hub.
Click Photo to Enlarge
Amber Bulb Configuration |
The 10 watt LED lamp in this unit offers exceptional power and a 50,000+ hour life span and is energized by leads which pass through sealing compound that separates the lamp chamber from the wiring compartment. The LED lamp assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. The LED lamp in this strobe light offers a 50,000+ hour lifespan. The unit shown is pendant mount, and we offer ceiling and wall mount versions as well for added installation versatility.
Stanchion Mount |
Voltages: 11-25V AC/DC draws 0.4A average @ 11VDC tapering to 0.05A average @ 25VDC.
16–24VAC draws 0.35A average.
120VAC draws 0.04A average.
Specifications / Additional Information
|EPSLED-80 Explosion Proof LED Strobe Light
Scroll Down to Purchase
|Lamp Type: LED
||Class I, Divisions 1 & 2, Groups C,D|
|Dimensions: from specs
||Class I, Zones 1 & 2, Groups llB, llA|
||Class II, Divisions 1 & 2, Groups E,F,G|
|Voltage: 120-277V AC 50/60 Hz or 11-25V AC/DC
||Class III, Divisions 1 & 2|
| Total Watts: 10W
||Certified to UL-844|
||Certified to UL-1598|
|Luminous Efficacy: 105 lm/w
||Certified to UL Marine Type|
|Lamp Life Expectancy: 50,000+ Hours
||Certified to CSA C22.2 no. 137-M1981|
|Color: Red, Blue, Green, Amber, Purple or White
||NEMA 3, 4, 4X, 7CD, 9EFG|
|Beam Angle: 110º
||Suitable for wet locations|
|Lighting Configuration: Strobing Flash
||Factory Sealed Light Fixture|
|Strobe Count: from specs
|Power Efficacy: >95%
|Power Factor: >0.9
|Amp Draw: 0.08A @ 120V, 0.04A @ 240V, 0.8A @ 12V, 0.4A @ 24V
|Ambient Operating Temp Range: -50°C to +65°C
|Operating Temp Rating: T3C
|Housing Material: Copper Free Cast Aluminum
||Special Orders- Requirements|
| Housing Finish: Epoxy Powder Coated
||Contact us for special requirements
|Lens Material: Hardened Borosilicate Glass
||Toll Free: 1-800-369-6671|
|Mounting: Wall, Pendant, Ceiling, or Stanchion
|Wiring Hub: 3/4" NPT (1-1/4" NPT Stanchion)