Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military
and security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only
source for the Golight Stryker Remote Control Spotlight with magnetic
View More Information
Larson Electronics stocks a comprehensive line
of hunting lights and related accessories. Our hunting lights include
rechargeable handheld LED spotlights and HID spotlights with red
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks
an extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including
explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
infrared LEDs, LED
boat lights and industrial light towers. Larson
Electronics also manufactures and distributes a wide range of HID high power spotlights and HID flashlights that
are ideal for use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that
are particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights, rechargeable flashlights, led flashlights,
high intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an
extensive line of military spotlights, floodlights, and military grade lighting accessories and
Many of Larson Electronicss
lighting products can serve equally well in the public and private sector as
camping lights, off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and
LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large
distributor of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights
for hunting and off-road use. Larson Electronics is the only source for the
Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks
a wide range of explosion proof lights and products as well as intrinsically safe lights and intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights, explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly
develops and manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of
military and law enforcement related accessories including the concealable, back
up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
If you have any questions or
special requirements regarding any of our industrial grade lighting solutions
please contact us by E-mail at email@example.com You can also call us toll free at 1-800-369-6671.
Purchase orders can be faxed to us at 903-498-3364 Larson
Electronics can provide detailed technical information regarding any of its
products and is capable of working with customers to create unique lighting
solutions to suit their needs and requirements.
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the
military/law enforcement industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a manufacturer
and as such we maintain a large available inventory of our magnetic mount
spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics
can also be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Hand Magnetic LED Light - 7, 3-Watt CREE LEDs - 100lb. Grip Magnetic Base - 675'L X 50'W Spot Beam
Part # HML-7LED-3C Price:
Buy American Compliant
The Larson Electronics HML-7LED-3C Magnetic Mount SpotLight offers high light output and a compact profile combined with a durable handle and a 100 lbs grip magnetic base. This IP68 rated LED light bar is waterproof to 3 meters and produces 1596 lumens while drawing only 24 watts of power @1.7 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 48 VDC and provides a durable and compact lighting solution that is ideal for military, law enforcement, commercial, security and hunting applications.
The HML-7LED-3C handheld spotlight from Larson Electronics produces a 650' long by 50' wide light beam with 1596 lumens of bright light. Seven Edison Edixeon® Emitters containing CREE EZBright® three watt LEDs producing 228 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a very tightly focused spot beam with limited spread or light spillage. Unlike other LED units, this model is NOT a wide spot. We also offer, however, optional floodlight versions with 40 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights.
The HML-7LED-3C is IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and ruggedly constructed to withstand demanding environments, conditions and applications. This particular unit is equipped with a 3.25 inch diameter, 100lb grip magnetic base. The operator can use the reverse pistol grip handle to position the beam. The tension style hinge brackets will then keep the light in the desired position until the operator moves it again. A 16 ft. Deutch connector coil cord ending in a cigarette plug adapter is also included which makes it ideal for mobile applications.
The HML-7LED-3C is an LED equipped version of the HML-5M-CP found in the Escalation of Force Kit. These high powered spotlights are used by the gunner to grab a subject's attention. The 100 pound grip magnet base holds the light in place on protective barriers and gun turrets on the military HUMVEE, even under the most aggressive road and off-road conditions.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Cree LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light bars can operate on current ranging from 9 to 48VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
HML-7LED-3C 40° Flood Beam
HML-7LED-3C 10° Spot Beam|
Durability: The HML-7LED-3C handheld LED light from Larson Electronics offers IP68 rated construction that is designed to withstand the rigors of demanding of environmental and operating conditions. These units can operate in temperatures of -40 degrees Celsius to 80 degrees Celsius, are waterproof to 3 meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance.
Mounting: This light is mounted to 3.25 inch diameter magentic base with 100lbs of grip and an impact resistant plastic handle for simple placement on any ferrous metallic surface and easy operation. The stainless steel hinge assembly on this unit allows the light angle to be adjusted for optimal light control. The adjusting hinges on this light are tensioned, allowing the user to simply position the light as desired without any need for locking the unit into place. Once positioned, the light will hold its position until the user again repositions it. Included with this light is a 16 foot coil cord ending in a cigarette plug adapter, allowing this light to be operated from any cigarette plug outlet.
The HML-7LED-3C spotlight also offers several detachable cord options for low voltage operation, including a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available.Operators can choose no cord is desired.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Specifications / Additional Information
Scroll Down to Purchase-
|LEDs: 7-Cree 3 Watt LED Emitters
||Cree 3 Watt LED Emitters|
|Dimensions: 4.49"-L 4.49"-H 3"-D
||LEDs Driven At 80% |
||-40 C~ +80C Operating Temp Range|
|Voltage: 9-48 VDC
|Weight: 2.65 Lbs
||70% Lumen Retention @65,000 hours|
|Lighting Configuration: 10° Spot or 40° Flood
|Mounting: 100 lbs Grip Magnetic Mount Impact Resistant Plastic Handle
||IP68 Rated Waterproof to 3 meters|
|Wiring: 16 Ft Coil Cord-Cigarette Plug
|Amps: 1.7 (on 12 volts)
||Special Orders- Requirements|
|LED Light Color: 6000K
||Contact us for special requirements |
|LED Life Expectancy: 50,000 hours
||Toll Free: 1-800-369-6671|
|Optics Efficiency: 90%
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
|Part #:||HML-7LED-3C (48327)|
9.42 / 10
19763 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Understanding the Basics of Modern Lighting Technology
Although the incandescent bulb requires little more than a source of electrical power, HID and fluorescent bulbs require ballasts, and LED lighting requires voltage regulating circuitry known as drivers. Since ballast and drivers can also consume electrical power as well as the lamp itself, it is important to consider the total energy consumed by the system versus lumens produced. [...]
LED Lights, Lighting of the Future
The newest and most well regarded entrance into the lighting markets has been the LED. LEDs represent an entirely new way of producing illumination that bears very little resemblance to traditional forms of lighting. With LEDs, nothing is burned, there are no gases and no glass, and the energy to light conversion rate is much much higher. The energy to light conversion rate is so much higher in fact, that LEDs now produce on the order of 80% more light per watt than the incandescent bulb. [...]
LED Advances and World Acceptance
All over globe, LEDs are popping up everywhere. You can now find LEDs in traffic signals, parking lot lamps, shopping centers, ships and aircraft and industrial manufacturing facilities just to name a few of the most popular applications. In cities and states across the US, reports are appearing in the media that back up the energy efficiency potential of LEDs, with many companies and local governments reporting reductions in energy consumption of up to 70% in applications where a full [...]
Modern Military Spotlights: Versatile Lightweight Power
Rechargeable spotlights and flashlights have become an increasingly important part of military operations. As recently as ten years ago military personnel in the field were forced to rely on personal lighting equipment that had very short operational times due to high energy consumption. This required the further addition of up to twenty pounds of batteries to keep them operational during a full mission deployment of ten days. [...]
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
Choose a Good HID Spotlight for Taking Coyotes
Despite there being many additional concerns with deciding to undertake the adventure of hunting at night, the rewards can be substantial as well. Although some additional preparation and planning is necessary as well as some additional equipment, chances are that once youve successfully performed your first night hunt youll be permanently hooked and ready for more. [...]