Class 1 & Class 2 Division 1 Explosion Proof UV Fluorescent Light - two foot two lamp
Part # EPL-24-2L-UV Price: $769.00
Spec Sheet Fiche technique Hoja de Especificaciones
Made in the USA
The Larson Electronics EPL-24-2L-UV Explosion Proof UV Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class 2 Division 1 uses a special ballast and bulb combination to produce ultraviolet light. This lamp is T6 rated and ideal for hazardous locations where UV lamps are used to cure coatings and adhesives or as germicidal agents.
The EPL-24-2L-UV fixture is a 2 foot long, 2 lamp, UL listed Class I Division 1 and Class II Division 1 & 2 explosion proof fluorescent light that emits light in the ultraviolet spectrum and is ideal for use in applications where space is at a premium. The EPL-24-2L-UV is made to order and can be configured to produce UVA, UVB or UVC light which is typically used for curing coatings or adhesives, pest management or in germicidal applications. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum coated with a high gloss reflective finish.
This fixture can operate on voltages ranging from 120V-277V 50/60Hz and is U.L. approved for use in paint spray booths. The EPL-24-2L-UV provides operators in hazardous locations with a compact, reliable and affordable UV lighting solution that combines effective production of UV light with with explosion proof protection.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge|
Ultraviolet Wavelength Options:
Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm spectrum.
Ultraviolet B Wavelength produces a shorter wave than the UVA wavelength. These medium sized waves range from 315nm - 280nm.
Ultraviolet C wavelength is reduced exceptionally. Some refer to this wave as the `germicidal` wave. The Ultraviolet C Wavelength ranges from 280nm - 100nm.
Mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
Lamp options for UV fixtures are determined by UV range.
Operators can specify UVA (-A part number suffix), UVB (-B) and UVC (-C suffix).
F20-T8 bulbs (20 Watts each) designed for UV applications are used.
The bulb and ballast in our UV fluorescent fixtures are unique to UV applications.
UVA(-A) 400nm - 315nm
UVB (-B) 315nm - 280nm
UVC (-C) 280nm - 100nm
Specifications / Additional Information
|EPL-24-2L-UV Explosion Proof Ultraviolet
Scroll Down to Purchase-
|Listing: United States - Canada
||Class I Division 1, Groups C and D T6|
|Dimensions: W-11.25" x L-27.5" x H-8.5 "
||Class I Division 2, Group A,B,C,D|
|Weight: 37 Lbs
||Class II, Division 1 & 2, Groups E,F,G|
|Voltage: Universal 120-277VAC 50/60 Hz
||UL 595 Marine Type (Saltwater)|
|Total Watts: 40 watts
|Total Lumens: N/A
||UL 1598 Marine Type|
|Lamp Life Expectancy: N/A
||Certified Canadian Standards|
|Luminous Efficiency (Lm/W): N/A
||Listed for Paint Spray Booths|
|Lamp Color: Ultraviolet - UVA, UVB, or UVC
|Nanometer:400nm-315nm, 315nm-280nm, 280nm-100nm
||California Title 24 Compliant|
|Beam Angle: 150°
||IP67 Rated - Waterproof|
|Ambient Operating Temp Range: -20°C to +70°C
||T6 Temperature Rating|
|Operating Temp Rating: T6 Rated
|Minimum Operating Temp: -30°C
||Approved for Confined Spares|
|Maximum Case Temp: +90°C
|Full Load Amperage: 0.384A @ 120V - 0.192A @ 240V
|Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free
|Lens Material: Hardened Borosilicate Glass Tubes
|Gasket Material: Buna Rubber O-Rings
||Special Orders- Requirements|
|Mounting: Surface Standard - Pendant Optional
||Contact us for special requirements |
|Wiring Hub: 1/2" NPT
||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*
|U.L Approval: U.S Certificate Canada Certificate
|Click here to view the Explosion Proof Light Design Description|
|Part #:||EPL-24-2L-UV (48274)|
9.39 / 10
21670 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
|11/20/17||Explosion Proof Germicidal Lamp Applications for HVAC Disinfection in Industrial Facilities|
Ultraviolet (UV) fixtures come with a plethora of uses and applications. From non-destructive testing (NDT) to non-invasive sterilization, UV light can be used to uncover harmful traces of foreign contaminants and abnormal conditions with minimal effort.
|10/13/13||Hazardous Location Equipment Certification Schemes According to Region|
Aside from the United States and Canada, hazardous location compliance schemes are dominated by the IECEx Scheme/ATEX Directive, with most countries adopting testing and approval standard based on their requirements. In some countries it is necessary to provide both IECEx/ATEX certification as well as testing reports under these schemes, while others will accept either/or. [...]
|02/06/11||LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts|
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
|02/05/11||Combustible Dusts: Explosive Potential|
According to OSHA, 30,000 U.S. facilities are at risk of fires and explosions caused by the presence of combustible dusts. OSHA also notes that between 1980 and 2005 118 workers were killed and another 718 injured in incidents involving a combustible dust explosion. Aluminum, steel, coal, grain, plastics, resins, flour, wood and a whole list of others both organic and non organic can become extremely flammable when ground, shaved or in some other way processed into fine particulates. [...]
|12/16/10||How Do You Know If a Light is really Explosion Proof?|
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
|08/02/10||Confined Space Lighting for Hazardous Locations |
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]