Explosion Proof Paint Spray Booth LED Light on Dolly Cart with Wheels - 4 foot 2 lamp
Part # EPLCD-48-2L-LED Price: $2,285.64
Spec Sheet Fiche technique Hoja de Especificaciones
Manual Spectrum Chart
Made in the USA
The Larson Electronics EPLCD-48-2L-LED Explosion Proof Paint Spray Booth Light on Dolly Cart is U.S./Canada U.L. approved Class 1 Division 1, Class II Division 1, T6 rated, and offers a versatile lighting solution for applications requiring exceptional work area lighting coverage.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*
The EPLCD-48-2L-LED dolly cart mounted explosion proof LED light is UL listed Class 1 Division 1 and Class II Division 1 & 2 and offers operators the ability to quickly and easily add a full power light wherever it is needed. This unit incorporates our four foot, two lamp explosion proof fixture equipped with two 28 Watt second generation LED T-series tube lights into a mobile dolly cart style platform. Each 28 watt lamp produces 3,500 lumens for a combined 7,000 lumen total light output. This configuration allows operators to wheel this light fixture into position next to the target or lay it flat to provide illumination beneath the target.
This T6 rated explosion proof LED light and dolly cart assembly offers an excellent lighting solution for operators who need illumination in unusual areas where traditional fixed mount lighting is obstructed or cannot effectively reach. The high output LED lamps provide quality lighting while the solid state design of LEDs provide a stable and durable light source, providing increased reliability and up time without the worries of traditional lighting.
The EPLCD-48-2L-LED with polycarbonate paint spray cover protects the lamps from over spray during operation.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge|
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
There is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency, cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat and impact resistant Pyrex tubes and an additional polycarbonate lens which provides added protection from impacts and over-spray. The light fixture is constructed of copper free aluminum alloy and is shipped with a 50` SOOW cord and explosion proof plug. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.
Click Photos to Enlarge|
5-15 Straight Blade Plug
5-20 Straight Blade Plug
6-20 Straight Blade Plug |
Wiring & Plug: This explosion proof cart mounted lighting system is equipped with 50` of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs. This unit is universal voltage (not multi-tap) and operates on a range from 100-277 volts 50/60 Hz AC. We also make a 11-25V version for low voltage applications that operates on both AC and DC voltages without modification.
Suggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
|Made in USA Quality
||Superior LED Benefits|
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
1. Extreme long life..
2. High efficiency and low amp draw..
3. High durability and reliability..
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
Specifications / Additional Information
|EPLCD-48-2L-LED Explosion Proof LED Cart Light
Scroll Down to Purchase-
|Listing: United States - Canada
||Class 1 Division 1, Groups C and D|
|Lamp Type: T8 Style LED Tubes
||Class 1 Division 2, Group A,B,C,D|
|Dimensions: W-11.25" L-52 " H-8.5"
||Class II, Division 1 & 2, Groups E,F,G|
|Voltage: Universal 100-277V AC 50/60Hz or 11-25V AC/DC
||UL 595 Outdoor Marine Type (Saltwater)|
|Weight: 65 lbs.
|Total Watts: 56 watts
||UL 1598 Marine Type|
||Certified US/Canadian Standards|
|Luminous Efficiency: 120 Lumens per Watt
||Listed for Paint Spray Booths |
|LED Lamp Life Expectancy: 50,000+ Hours
||50,000+ Hour LED Life Span|
|Color Temperature: 5600K or 4100K
||High Output T8 Style LED Tube Lamps|
|Color Rendering Index: >80
|Beam Angle: 150°
|Ambient Temp Range: -40°C to +85°C
|Minimum Operating Temp: -30°C
|Maximum Case Temp: +90°C
||Special Orders- Requirements|
|Materials: Aluminum Cart, Aluminum Housing, Pyrex Tubes
||Contact us for special requirements |
|Mounting: Dolly Cart w/ Polyurethane Casters
||Toll Free: 1-800-369-6671|
|Wiring: 50` 16/3 SOOW Cable w/ EXP Cord Cap
|Cord Cap: 5-15 Straight, 5-20 Twist or 6-20 Twist EXP Plug
|Click here to view the Explosion Proof Light Design Description|
9.39 / 10
22129 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
|02/20/16||Voltage Drop in Low Voltage Lighting Systems|
Because of the risks associated with flammable gases, dusts, and particles in hazardous work areas, low voltage lighting systems are a natural choice to increase safety in areas where the potential for combustion exists. This becomes especially challenging when lights must be run at long distances with limited power sources. Low voltage systems typically run on 12-24 volts DC, but even within this lower range, a precise balance between distance, wattage load, and correct wire gauge must be [...]
|02/10/16||Benefits and Applications of Explosion Proof LED Lighting in Confined Spaces|
The complex and hazardous nature of confined spaces present numerous risks for workers. Because of this, many businesses that operate in hazardous locations make use of explosion proof lights to prevent the ignition of flammable gases and dust particles. LED technology has contributed to the features of explosion proof lights by making them more reliable, sturdy and cost-effective. [...]
|09/05/13||Basics of Hazardous Location Confined Space Lighting|
The terms explosion proof and intrinsically safe refer to different types of electrical equipment which have been designed specifically to be used in locations where potential flammable or explosive atmospheres are present. Explosion proof equipment is generally higher powered and designed to prevent any ignitions within the lamp from igniting the atmosphere outside the lamp. Foe example, if gases enter into the lamp housing and are ignited by a spark, the lamp contains the ignited gases long e [...]
|09/01/12||T12 Fluorescent Light Phaseout and Upgrade Alternatives|
The Energy Independence and Security Act of 2007 helped usher in a new era of tighter energy efficiency standards, and although the T12 for its time was indeed an efficient luminary, its design is such the further improvements to increase its efficiency are neither practical nor cost effective. As a result, the T12 is unable to meet the new energy standards required for modern lighting technologies and as of July 2012 was phased out of production.
|02/17/12||Comparing LEDs and Incandescent Bulbs: Opposite Ends of the Lighting Spectrum|
The process by which LEDs produce light is called electroluminescence, and it is far more efficient than the process of resistance used in incandescent lamps. Very little energy is wasted as heat in an LED, and more of the electrical energy converted to light. This allows LEDs to produce the same amount of light as an incandescent while using only a fraction as much electrical energy. [...]
|01/09/12||LED Mine Lighting and Worker Safety|
Utilizing controlled tests involving standard mining cap lights, common commercial grade LEDs, and a special LED mining light design of their own making, they found that for most intents and purposes, LEDs provided a greater degree of contrast and improved threat detection times as shown by test subjects. Particularly in the case of workers over the age of 40, with 43 years being the average age of mine workers, contrasting of LED illuminated objects was improved 43%. Additionally, threat detect [...]
|11/22/11||Paint Spray Booth Lighting: Safety and Effectiveness|
Lighting for paint spray booths must adhere to federal and local regulations regarding the use of lighting in hazardous locations. OSHA offers a wealth of information on explosion proof lighting and hazardous locations and it is never a bad idea to familiarize yourself with what they have to offer if you’ll be operating a paint booth. Lighting for spray paint booths must be approved for hazardous locations and carry certification proving its suitability for use in a particular environment. Paint [...]
|11/16/11||The Higher Cost of LEDs: The Reasons May Surprise You|
China, with its heavy emphasis on developing its economic and political power, has seen an explosion of potential in the market for its rare earth minerals and as a result taken several steps towards managing this now almost indispensible resource. Manufacturers of everything from to cell phones, televisions, and solar power equipment and yes, LEDs, rely on a steady and adequate supply of these minerals. In 2010, manufacturers became quite alarmed when China announced its plans to cut back on it [...]
|10/05/11||Choosing Spray Paint Booth Lighting and Booth Design |
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...]
|07/13/11||Combustible Dust Standards and Preemptive Safety|
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...]
|02/06/11||LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts|
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
|12/16/10||Infrared Light and CCD Based Digital Cameras|
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
|12/16/10||How Do You Know If a Light is really Explosion Proof?|
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
|09/02/10||Spray Booth Lights: Which Type for Best Results?|
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
|08/02/10||Confined Space Lighting for Hazardous Locations |
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]