Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military
and security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only
source for the Golight Stryker Remote Control Spotlight with magnetic
View More Information
Larson Electronics stocks a comprehensive line
of hunting lights and related accessories. Our hunting lights include
rechargeable handheld LED spotlights and HID spotlights with red
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks
an extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including
explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
infrared LEDs, LED
boat lights and industrial light towers. Larson
Electronics also manufactures and distributes a wide range of HID high power spotlights and HID flashlights that
are ideal for use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that
are particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights, rechargeable flashlights, led flashlights,
high intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an
extensive line of military spotlights, floodlights, and military grade lighting accessories and
Many of Larson Electronicss
lighting products can serve equally well in the public and private sector as
camping lights, off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and
LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large
distributor of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights
for hunting and off-road use. Larson Electronics is the only source for the
Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks
a wide range of explosion proof lights and products as well as intrinsically safe lights and intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights, explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly
develops and manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of
military and law enforcement related accessories including the concealable, back
up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
If you have any questions or
special requirements regarding any of our industrial grade lighting solutions
please contact us by E-mail at email@example.com You can also call us toll free at 1-800-369-6671.
Purchase orders can be faxed to us at 903-498-3364 Larson
Electronics can provide detailed technical information regarding any of its
products and is capable of working with customers to create unique lighting
solutions to suit their needs and requirements.
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the
military/law enforcement industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a manufacturer
and as such we maintain a large available inventory of our magnetic mount
spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics
can also be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
72 watt 24 LED Emitter Light - Precise Pulsing Control for Strobe to 1KHz and Dimming Down to 2%
Part # LEDLB-24SD-C Price:
Click here to view the LED lights comparison chart
Click here to view the spectral chart
Buy American Compliant
The Larson Electronics LEDLB-24SD-C LED Light Bar offers high light output in a light weight, durable, low profile housing combined with versatile mounting and power options. This IP67 rated LED light bar is waterproof to one meter and produces 4,320 lumens while drawing only 72 watts of power @6 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and can be configured to produce Red, Green, Amber, Blue or Infrared light.
The LEDLB-24SD-C LED light bar from Larson Electronics produces a 575` long by 70` wide light beam with 4,320 lumens of Red, Green, Amber or Blue light while drawing only 72 watts @6 amps from a 12 volt electrical system. Twenty Four Edison Edixeon® Emitters containing CREE EZBright® three watt LEDs producing 180 lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread approximately 300` long by 280` feet wide.
These LED light bars are IP67 rated and waterproof to one meter, sealed against intrusion by dust and dirt and ruggedly constructed to withstand demanding environments and applications. The entire Larson Electronics LEDLB series are constructed of extruded aluminum and feature rubber isolated mounts and unbreakable polycarbonate lenses to provide durability and resistance to vibrations, impacts, waves, hard rains, sand and high winds.
This LED light contains a specially designed board that enables operators to feed a pulse train or variable voltage to produce custom strobe sequences or various dimming scenarios. These LED lights are dimmable down to 2 percent, while most of our LED lights are only dimmable to 11% with our standard PWM (PWM-6). For example, using a variable voltage power supply, operators can feed a 7Hz pulse to the light and get 7Hz flash rate out. In addition to white light and infrared light, these 72 watt LED light is configurable with amber, blue, red or green LEDs.
The spectrum bandwidth charts, defining center frequency are available for download. We are able to provide designers and operators precise control over the light while maintaining integrated drivers that continue to protect and optimize the LED package functionality with a separate control wire. If the green control wire is disconnected or grounded the lamp operates normally. If a voltage between1.8 to 40V positive relative to ground is applied to the control wire the lamp will turn off.
The control wire input can be used for pulsing with a pulsing frequency range of DC to 1kHz with duty cycle range of 0 to 98% at 1kHz. Control input is inverted with a Pulse Width Modulator (PWM), for example if you applied a 90% PWM signal to the control pin, the lamp would be on for 10% of the time.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge|
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels ranging from 9 to 42 VDC. These LEDLB series light bars can operate on current ranging from 9 to 42 VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-24SD-C 35° Flood Beam
LEDLB-24SD-C 10° Spot Beam|
Durability: The LEDLB series of LED light bars from Larson Electronics are lighter and smaller than our LEDLB-E extreme series and offer IP67 rated construction that is designed to withstand tough environmental and operating conditions. These units can operate in temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, are waterproof to one meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum, the hardware is stainless steel and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations, contributing to these units 15.6Grms rating of vibration tolerance. These LEDLB series light bars are ideal for use in marine environments as well as industrial and commercial settings.
Mounting: These LEDLB light bars feature a smaller profile and lighter weight than our LEDLB-E series lights, making them ideal for use in locations where traditional lights cannot fit or would block other mounted equipment. Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface.
In this LED emitter light bar model, an additional mounting option is provided. The adjustable, shock insulated mounts are attached to a simple, inverted u-bracket type mount. The LED light bar can then be mounted via a single 3/8 bolt through the center of the bracket. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Specifications / Additional Information
|LEDLB-24SD-C LED Light Bar
||LEDLB LED Features|
Scroll Down to Purchase-
|LEDs: 24 Edixeon® 3 Watt LED Emitters
||Edixeon® 3 Watt LED Emitters|
|Dimensions: 8"-L 4.7"-H 3.00"-D
||LEDs Driven At 80% |
||-40 C~ +80C Operating Temp Range|
Voltage: 9-42 VDC
Spot Beam: 575`L x 70`W
Flood Beam: 130`L x 100`W
|70% Lumen Retention @65,000 hours|
|Weight: 4 Lbs
||IP67 Rated Waterproof to 1 meter|
|Lighting Configuration: 10° Spot or 35° Flood
|Mounting: Flat Surface or Tube - Adjustable
|Wiring: Deutsch IPD / LADD DT04-2P connector
|Amps: 6 (on 12 volts) 3 (on 24 volts)
||Special Orders- Requirements|
|LED Light Color: Red, Blue, Green Amber, Infrared
||Contact us for special requirements |
|LED Life Expectancy: 50,000 hours
||Toll Free: 1-800-369-6671|
|Optics Efficiency: 90%
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
9.41 / 10
20834 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Choosing LED Lights Based on Lumens and Wattage
For the most part, LED products produced by third parties and manufactured in countries such as China tend to be of lower grade and fail to meet many of their claimed performance specifications. It is also worth noting that LEDs and fixtures are often a joining of two or more manufacturers' products in order to keep production costs low. As a result, many LEDs used in specialized devices and fixtures may come from one manufacturer, while the electronics driving the LEDs and the housing may come [...]
LEDs: Industrial Practical and Medical Versatility
While LEDs certainly hold a great deal of potential and promise for medical application, unless there is peer reviewed evidence for support, it is highly doubtful that such unproven therapies are of much benefit. It is probably wisest to not allow the excitement and newness of LED technology to color judgment when it comes to such serious medical conditions and instead defer to established medical practices for effective treatments. [...]
Equipment Mounted Light Bars for Safety and Productivity
Light towers are a popular choice for the nighttime jobsite because of their ability to illuminate large areas with a great deal of high quality light. These light towers are generally an array of two to four metal halide lights mounted on telescoping poles and powered by a dedicated diesel generator. They can typically illuminate an area of approximately two acres and provide a great solution for contractors who need powerful illumination for large scale projects. [...]
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]