Explosion Proof Paint Spray Booth LED Lighting - 2 Foot, 2 Lamp Fixture - Class 1, Div. 1
Part # EPL-24-2L-LED Price: $846.77
Spec Sheet Fiche technique Hoja de Especificaciones
Dimensions Manual Spectrum Chart
IES STEP EASM
Video 1 Video 2
Made in the USA
The Larson Electronics EPL-24-2L-INTL-20WT8 Explosion Proof Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 1, Class 2 Division 1 and for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.
The EPL-24-2L-INTL-20WT8 fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F20-T8 lamps and is available with a variety of lamp options which are listed below. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is UL Listed for use in paint spray booths.
The EPL-24-2L-INTL-20WT8 provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
Surface Mount (Standard) |
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Pendant Mount (Optional) |
Click Photo to Enlarge
3 Conduit Positions
Click Photo to Enlarge |
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
F20-T8 – 1559 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color
Specifications / Additional Information
|EPL-24-2L-INTL-20WT8 Explosion Proof
Scroll Down to Purchase-
|UL Listing: United States - Canada
||Class 1 Division 1, Groups C and D|
|Dimensions: W-11.25" L-27.5" H-8.5 "
||Class 1 Division 2, Group A,B,C,D|
|Weight: 55 Lbs
||Class II Division 1- 2, Groups E,F,G |
|Total Watts: 40 watts
||UL 844, 924|
|Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
||UL 1598 Marine Type|
|Total Lumens: 3118
||UL 595 Outdoor Marine Type (Saltwater)|
|Lamp Life Expectancy: 24,000 Hours
||UL listed for Paint Spray Booths*|
|Efficiency: 78 Lumens per Watt
||California Title 24 Compliant|
|Ambient Operating Temp Range:-30 C to 70 C
|Beam Angle: N/A
||Special Orders- Requirements|
|Color Temp: 4100K
||Contact us for special requirements |
|Mounting: Bracket Standard - Pendant Optional
|Wiring Hub: 1/2 inch threaded
||Toll Free: 1-800-369-6671|
|U.L Approval: U.S Certificate Canada Certificate
|Operating Temp Rating: T6 Rated
|Minimum Operating Temp: -30 C
|Maximum Case Temp: 90 C
|*Wattage totals are lamps only and may vary with different lamps.
|Click here to view the Explosion Proof Light Design Description|
9.38 / 10
22433 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
|12/05/12||Explosion Proof Protection Against Combustible Dusts|
One of the most serious dangers dusts pose, however, is the threat of fire or explosion if exposed to an ignition source. Almost any type of material, from iron to wheat, can become explosively flammable when ground into fine particulates, and in many cases little more than a spark is all that is needed to produce this ignition.
|02/17/12||Comparing LEDs and Incandescent Bulbs: Opposite Ends of the Lighting Spectrum|
The process by which LEDs produce light is called electroluminescence, and it is far more efficient than the process of resistance used in incandescent lamps. Very little energy is wasted as heat in an LED, and more of the electrical energy converted to light. This allows LEDs to produce the same amount of light as an incandescent while using only a fraction as much electrical energy. [...]
|01/30/12||Lighting Color Temperature in Basic Terms and Applications|
Commercial applications most often make use of lamps producing cool white light in the 4000 to 6500 Kelvin range because their light is sharper and more intense, with better color rendering and contrasting properties. Objects illuminated by these lamps appear brighter, more sharply defined, making these lamps well suited for offices, retail stores and commercial areas where detail and sharpness is important.
Lamps with temperatures around 5000-5500 Kelvin are usually considered to produce natu [...]
|10/05/11||Choosing Spray Paint Booth Lighting and Booth Design |
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...]
|09/21/11||IECex/ATEX and North American NEC HAZLOC Equipment Classification|
North America is presently not operating with the IECex/ATEX schemes although some effort has been made to produce some homogenity between North American and European Standards, most notably the US and Canada's adoption of a Zone system (NEC 505) modeled after European Schemes. However, despite the great similarity between North American and European Zone systems, they are not identical and are not interchangeable.
|08/03/11||Hazardous Locations: Collapse the Triangle and Prevent Ignition|
With hazardous locations, it is rarely easy or practical to remove either oxygen or fuel. This is because it is impossible to operate an oxygen free environment, and the very compounds that are present are the very part of the industrial process. Thus, removing heat, or rather the source of ignition becomes the primary target for practicing prevention. Indeed, when incidents arise, it is often determined that “inadvertent ignition” had taken place. So, it is then important to identify and unders [...]
|07/13/11||Combustible Dust Standards and Preemptive Safety|
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...]
|02/06/11||LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts|
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
|12/16/10||Infrared Light and CCD Based Digital Cameras|
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
|12/16/10||How Do You Know If a Light is really Explosion Proof?|
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
|09/02/10||Spray Booth Lights: Which Type for Best Results?|
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
|08/02/10||Confined Space Lighting for Hazardous Locations |
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]
|07/20/10||“Explosion Proof”: Its Not Just a Label|
Hazardous work areas are one of the most demanding environments for the workers and equipment that must operate within them. The often confined spaces combined with the presence of volatile materials presents a serious danger of fires and explosions that must be adequately addressed to insure the safety of workers and the public in both the work space and the surrounding area. [...]
|06/28/10||Explosion Proof and Intrinsically Safe: There is a Difference|
When it comes to explosion proof lighting many people have trouble understanding exactly what the term means. Factor in that there is also the term “intrinsically safe light” which is related to explosion proof lighting, and the fact that few people have had the benefit of a good layman explanation of the terms, and it becomes clear that there is plenty of room for confusion. [...]
|06/02/10||Explosion Proof LEDs: Advanced Technology for Spray Booth Applications|
One of the most critical aspects of a properly designed spray booth is the type of lighting to be used in its operation. For most applications, the number and size of the lights needed is determined by the size of the booth. The second most important consideration is the quality of the illumination provided by these lights. [...]
|04/22/10||Explosion Proof Lights: Lessening the Danger in Hazardous Work Areas|
Hazardous work areas present special challenges for the workers and businesses that must operate within them. These work areas are often confined rooms or containers like fuel tanks where vapors and gases from work activities can become concentrated to dangerous levels. As well as the obvious dangers posed by inhalation of these contaminants are the not so obvious dangers that can have lethal consequences if not properly addressed. [...]