LED Light Bar contains 20 3-watt high powered LEDs providing 60 watts of LED light power that produce a beam 1100'L x 110'W. This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts. This unit has a user controlled modulation This unit is designed to be moved easily from vehicle to vehicle or to different positions on the same vehicle. In addition, no installation is required.
BUY AMERICAN COMPLIANT
The LED light emitter is equipped with riser brackets that enable the operator to tilt the light up or down, to adjust the beam position. Heavy duty shock absorbers add protection to the light and stabilize the beam so it doesn't jiggle even when on vibrating equipment.
This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts.
The www.larsonelectronics.com LED emitter light bar uses a patent pending LED and reflector combination to provide a high powered, projected light source for vehicles, heavy equipment and security applications. Each LED is combined with its own reflector. The material composition and angle of the reflector, paired with the positioning and angle of the LED create a wide spot beam, which is unusual for a LED array.
Each light bar is manufactured with an extruded aluminum housing, machined aluminum mounts and stainless steel hardware for strength, durability and weather resistance.
Low profile LED Light Bars are perfect for mounting in tight spaces where traditional lights would not fit or where larger format lights would block mounted equipment.
All of the www.larsonelectronics.com LED emitter lights work on voltages ranging from 9 volts to 32 volts, including 24 Volts, 18 volts, etc.
All of our LED emitter bars are IP 67 rated, being both waterproof and dust proof.
This LED light emitter bar is unique because of the patent pending technology that pairs a reflector with each LED. Typically LEDs are mounted against a surface and "glow". This glow is often effective at close range, but the light energy drops off rapidly. By pairing each LED with a reflector, the emitted light energy is concentrated and projected outward, so that the "drop off" in light energy does not occur until much greater distances. Like all reflector technology, the amount of light energy projected is directly related to the shape and material of the reflector, as well as the thickness and composition of the lens. Because this LED light bar clusters the LED/reflectors together, the light pattern is both wide and deep. This LED light bar emitter produces a wide spot pattern (or a modified spot pattern) which falls in between a narrow spot and a flood pattern.
Height: 2.75 inches (5 inches tall with magnetic bases)
Depth: 3 inches
LED Watts: 3
Volts: Works on any voltage between 9 volts and 32 volts, including 12 and 24 volts
Amps: 5 (on 12 volts) 2.5 amps (on 24 volts)
LED Light Color: 7000K
Housing Color: available in black or white
LUX Measurements: In FLOOD
At The Lens: 199,800
At 1 Meter: 4,450
Lens Temperature: 78 Degrees F
LUX Measurements: In SPOT
At The Lens: 188,400
At 1 Meter: 24,800
Lens Temperature: 76 Degrees F
Ambient operating temperature range: -40 degrees C to 85 degrees C
Low amp draw
Instant light output
50,000 hour life
Small form factor
Efficient heat dissipation
Magnetic mounting bases adjust the beam of the light