Made in the USA
The Larson Electronics
RNT-HALSS-48-2L Hazardous Area Fluorescent Light Fixture is UL Listed Class
1 Division 2 Groups A, B, C and D - UL 1598A listed and is specifically designed
to withstand high vibration locations and the rigors of wet and corrosive marine
environments. This unit is for rental
RNT-HALSS-48-2L hazardous area fluorescent light fixture is designed for use in
wet areas and saltwater-marine environments where corrosion resistance is
critical to equipment longevity and safety. This Class 1 Division 2 rated
fixture is constructed of non-corrosive materials including a stainless
steel housing, a poured in gasket for reliable sealing and an impact
resistant acrylic diffuser. Corrosion resistant stainless steel latches secure
the lamp cover to the housing and provide a firm lock against the poured in seal
to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1
Division II, Groups A, B, C, D approved. The RNT-HALSS-48-2L also carries UL
1598A and UL 595 outdoor marine ratings and meets US Coast Guard specifications.
This fixture is designed for heavy duty use in
applications where intense vibration and corrosive environments may be
encountered. Stainless steel construction, high impact acrylic lamp covers, and
a Class 1 Division 2 U.L. rating make this light ideal for hazardous areas that
require illumination with above average dependability.
NOTE ON LAMPS: This fixture comes equipped with F54-T5/841/HO – 54 Watt lamps
producing 5,000 lumens per bulb, a 4100 Kelvin color and a 20,000 hour rated
service life. We offer F48-T12/HO – 4050 lumens per bulb, 12,000 hours life,
4100 Kelvin color and F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100
Kelvin color tubes as lamp options for this fixture. The RNT-HALSS-48-2L has an
electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ,
240 Volt 60 HZ and 277 Volts 60 HZ. 24 Volt models available on request for an
additional $100 per unit charge.
Brackets: Stainless steel bracket mounts
attached at each end of the fixture enables it to be simply secured to any
surface. The mounts provide flexibility in setting the angle of the fixture.
Three through holes provide sufficient mounting for any
Applications: The RNT-HALSS-48-2L is designed for marine
wet and damp locations, where corrosion resistant fluorescent lights are
required. This lamp is also ideal for locations where heavy vibratory conditions
are present. This includes petrochemical facilities, lubrication pits, oil
drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas,
processing plants and marine loading docks.
|Made in USA
1. Each unit dialectically tested.
2. Fixture arrives
assembled and lamped to reduce installation time and cost. Flange type stainless
steel mounts attached at each end of the fixture enables it to be simply secured
to any surface.
3. Fixture housing constructed of 14 gauge stainless
4. Relamping done via stainless steel snap locking latches which
allow the operator to remove the door and access the lamps.
cover-diffuser constructed of high impact acrylic for corrosion resistance and
6. 1/2 inch, threaded access hole for wiring conduit.
F54-T5/841/HO – 54 Watt, 5000 lumens per bulb,
20,000 hours life, 4100 Kelvin color
F48-T12/HO – 4050
lumens per bulb, 12,000 hours life, 4100 Kelvin color
– 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color
Specifications / Additional
||UL 844 Class 1 Division 2, Groups A, B, C, D
|Dimensions: W-9 1/2" L-54 " H-6 3/4"
||UL 595 outdoor marine |
|Weight: 35 Lbs
||UL 1598A Marine Type (Salt water)|
|Total Watts: 108 watts*
|Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz (24V on
|Total Lumens: STD-T5-HO
|Lamp Life Expectancy: STD-T5-HO Bulbs
|Efficiency: STD-T5-HO Bulbs
92 Lumens per Watt
|Operating Temp Range: T4C Rated
-30 C to 70 C
|Minimum Operating Temp: -30
|Maximum Case Temp: 90 C
||Contact us for special requirements |
|Mounting: Flange type stainless steel
||Toll Free: 1-800-369-6671|
1/2 inch threaded
|Rental Type: Monthly, Weekly, Daily
U.L Approval: U.S Certificate
|Meets US Coast Guard
*Wattage totals are lamps
only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and
various other paper work, Larson Electronics processes rentals like orders until
the product is returned. This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the
destination. Please contact us Toll Free:
at 1-800-369-6671 or (903) 498-3363 for
further information if required.
Rental prices for the
Subtract rental cost from total cost for the
amount that will be credited back to customer upon return of product. Deductions
will also be made for shipping, repairs, and excessive cleaning, if
Scroll Down to Purchase-