Made in the
The Larson Electronics
RNT-HALP-EMG-48-2L Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L.
approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4C
temperatue rating and is specifically designed to handle the rigors of wet
and corrosive marine environments. This fixture is equipped with an added
battery backup providing 90 minutes of emergency
runtime.This unit is for rentals. Please scroll down for
RNT-HALP-EMG-48-2L hazardous area fluorescent light fixture is designed for use
in wet areas and saltwater-marine environments where corrosion resistance is
critical to equipment longevity and safety. This Class 1 Division 2 rated
fixture is constructed of non-corrosive materials including a polyester housing
reinforced with glass fiber, a poured in gasket for reliable sealing and an
impact resistant acrylic diffuser. Corrosion resistant stainless steel latches
secure the lamp cover to the housing and provide a firm lock against the poured
in seal to prevent drips and water intrusion. This fixture is UL 844 rated and
Class 1 Division II, Groups A, B, C, D approved. The HALP-EMG-48-2L also carries
a UL 1598A outdoor marine rating and meets US Coast Guard specifications.
fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The
HALP-EMG-48-2L-T12HO also carries a UL 1598A outdoor marine rating and meets US
Coast Guard specifications.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
fluorescent light works, mounts and is wired like our HALP-48-2L explosion proof
fluorescent light fixtures. The main difference is that we add a battery backup
unit that adds emergency light functionality to the fixture. This hazardous
area emergency light will run the standard UL suggested 90 minutes after power
is lost. The light recharges the battery once electrical power is restored.
Standard configuration includes a single emergency ballast that will run a
single lamp at 900 lumens for 90 minutes. The battery backup unit includes a
switched leg for turning the light fixture on/off without kicking the unit into
NOTE ON LAMPS:
This fixture comes equipped with F54-T5/841/HO – 54 Watt lamps producing 5,000
lumens per bulb, a 4100 Kelvin color and a 20,000 hour rated service life.
Brackets: Flange type stainless steel mounts attached at each end of
the fixture enables it to be simply secured to any surface. The mounts provide
some shock absorbency protection while enabling the user to simply mount the
fixture with the through-hole taps that protrude on each side of the fixture.
The mounting holes are 36 9/16 inches on center apart along the top of this
hazardous location light. The mounting holes are 7 inches on center across the
top of the light.
Applications: The RNT-HALP-EMG-48-2L is designed for marine wet and
damp locations, where corrosion resistant fluorescent lights are required. This
includes petrochemical facilities, lubrication pits, oil drilling rigs, crew
quarters, solvent/cleaning areas, water treatment areas, processing plants and
marine loading docks.
|Made in USA
1. Each unit dialectrically tested.
2. Fixture arrives
assembled and lamped to reduce installation time and cost.
Flange type stainless steel mounts attached at each end of the fixture enables
it to be simply secured to any surface.
3. Fixture housing constructed of
glass fiber reinforced polyester.
4. Relamping done via 6 stainless steel
snap locking latches, which enable the operator to remove the door and access
5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.
or 3/4", threaded access hole for wiring conduit.
F48-T12/HO – 4050 lumens per bulb, 12,000 hours
life, 4100 Kelvin color
Specifications / Additional
Scroll Down to
United States - Canada
||Class 1 Division 2, Groups A, B, C,
||UL 844 |
|Dimensions: W-8.25 " L-52 " H-7"
||UL 1598A Marine Type (Salt water)|
||UL 924 - Failsafe battery backup |
Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
||cUL Listed for Canada |
|Low Voltage Optional:
||Meets USCG Specs|
||T4 Temperature Rated|
|Total Lumens: F48-T12/HO
||Switch Leg for Powering Light On/Off|
|Luminous Efficacy: 83 Lm/W
|Lamp Life Expectancy:
|Color Temp: 4100K- CRI-75
|Efficiency: 98 Lumens per Watt
|Ambient Operating Temp Range:
-40° C to +70° C
|Operating Temp Range:
90 Minute Runtime
Mounting: (2) Flange Type Aluminum
Mounting: (2) 1/2" or 3/4" Threaded NPT Hubs on
(2) 1/2" or 3/4" Threaded Hubs
||Contact us for special requirements|
|Rental Type: Monthly, Weekly, Daily
||Toll Free: 1-800-369-6671|
|U.L Approval: U.S Certificate
Meets US Coast Guard
Rentals: In an
effort to cut back on contracts and various other paper work, Larson Electronics
processes rentals like orders until the product is returned. This means, we will
charge the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available. Customer must
pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.Rental Prices for the