Made in the USA
The EPLC2-250MH metal halide, hazardous
area light fixture from Larson Electronics produces 22,500 lumens of light
capable of illuminating an area approximately 10,500 square feet in size.
Weather proof and U.L. listed for marine use, this metal halide fixture is
available in pendant, ceiling or wall mount versions and is an ideal choice
for industrial applications and use in enclosed spaces.
durable EPLC2-250MH metal halide fixture from Larson Electronics is approved for
use in wet marine locations and is ideal for industrial applications,
confined spaces, hazardous work areas and Class 1 DIV 2 areas where a
powerful and durable floodlighting solution is needed. The lamp housing is
weatherproof and constructed of non-sparking aluminum featuring a heavy duty,
mogul base lamp socket, tempered and heat resistant glass dome and cast aluminum
dome guard. This lamp carries a long lamp life rating of 60,000 hours and a fast
hot restrike capability, reducing downtime and replacement costs.This unit is
available in pendant, ceiling and wall mount versions and includes
stainless steel exterior hardware for added resistance to the salt water
conditions found in marine environments.
Click Photo to
This hazardous area light is U.L.
rated Class 1 Division 2, Groups A, B, C and D and UL1598 listed for outdoor
marine use. The integral multi-tap ballast is protected within the weatherproof
housing and can be operated on 120, 208, 240 and 277 Volts. This lamp is
suitable for use in confined spaces and areas where wet marine conditions exist.
The multi-purpose floodlight design of this fixture makes it a popular choice
for industrial and marine applications regardless of whether the locations are
designated hazardous or not. The non sparking aluminum fixture body is
electrocoated for durability and corrosion resistance while a tempered glass
globe protected by an aluminum globe guard provides lamp security against
impacts and the elements.
Wiring: This light is highly durable and produces high
22,500 lumen light output in a wide flood pattern. Wiring is through a
convenient ¾ inch NPT conduit entrance. Three-conductor No. 14 cable (with 90° C
minimum insulation) is recommended for making electrical connections. Wiring is
accomplished through the wiring enclosure provided on the fixture. The box is
provided with a size 3/4-in. NPT threaded conduit opening. Wiring methods must
comply with NFPA 70 (The National Electrical Code).
Suggested applications: ship yards, boat yards,
plants, tanks, vessels, fuel cells, barges and oil field
|Made in the USA
1. High Efficiency Metal Halide lamp.
Lumens per Watt.
3. Rugged Die Cast Aluminum Lamp Housing.
Resistant Tempered Glass.
5. Heavy Duty Gasket.
6. Socket: Mogul Base.
7. Low Maintenance.
9. Stainless Hardware.
10. UL Approved for Marine
1. Long lamp life.
2. High efficiency and low
amp draw after initial startup.
3. High durability and reliability.
High output and very good color rendering.
5. Vibration and shock
Specifications / Additional
|EPLC2-250 MH Explosion
Proof Metal Halide
Scroll Down to
Type: Metal Halide
||Class 1, Division 2 Groups A,B,C,D
|Lamp Dimensions: 21 1/2"-L, 13"-OD,
||Class 1 Zone 2 -Groups IIA, IIB, IIC |
|Ballast: Pulse Start / Multi-Tap
||Class 2, Division 1 & 2, Groups E,F,G |
||NEMA 4x, IP66, NEMA 9 |
|Lumens Per Watt: 90
||UL 1598 Marine|
|Voltage: Multi-Tap -120, 208, 240 and 277 Volts
||Suitable for Wet Locations|
|Mounting: 3/4" Ceiling, Wall or Pendant mount
Class1 DIV 2 Groups A,B,C,D
|Wiring: 3/4 inch Conduit
||Contact us for special requirements |
||Toll Free: 1-800-369-6671|