Buy American Compliant
The Larson Electronics LEDLB-4-P LED Light
Bar offers high light output and good durability combined with a versatile
permanent mounting system that provides convenience and secure attachment to
vehicles, equipment and any flat surface. This IP67 rated LED light bar is
waterproof to 1 meter and produces 720 lumens while drawing only 12 watts of
power @1 amp from a 12 volt electrical system. This light can run on any voltage
from 9 to 42 volts and provides a rugged and compact lighting solution that is
ideal for use in commercial marine environments as well as commercial and
manufacturing applications such as machine vision system lighting, heavy
equipment illumination, vehicle lighting and law enforcement.
The LEDLB-4-P LED light bar from Larson Electronics produces a 90`
long by 70` wide light beam with 720 lumens of bright light. Four Edison
Edixeon® Emitters containing CREE EZBright® three watt LEDs producing 180 lumens
each are arranged in rows and paired with high purity 10 degree optics to
produce a well focused spot beam with limited spread or light spillage. We also
offer optional floodlight versions with 35 degree optics to produce a wider beam
spread and more light over a larger area nearer the fixture, making flood
versions ideal for use as work and area lights. Flood versions equipped with our
DCP-11
Waterproof Transfomer are ideal for wall pack and exterior building or
landscape lighting.
These LED light bars are IP67 rated and waterproof to 1 meter,
sealed against intrusion by dust and dirt and ruggedly constructed to withstand
demanding environmental and operating conditions. The entire Larson Electronics LEDLB series are constructed of
extruded aluminum and feature aluminum housings, stainless steel hardware,
rubber isolated mounts and unbreakable polycarbonate lenses to provide increased
durability against corrosion, impacts, waves, hard rains, sand and high
winds. |
 |
|
This image shows a dark street,
illuminated by nothing but distant street lamps and suburban lighting.
|
The same street illuminated with the
LEDLB-4-P, easily reaching distances of 90` in length and 70` in width. .
|
Click Photo to
Enlarge |
Click Photo to
Enlarge |
*We have had excellent feedback from boat builders
and other marine applications where they are able to create lighting effects on
the mast, etc. that typically cost 10 times as much but with little amp
draw. Technically, the specification indicates a 1 amp draw per unit but
the feedback we are getting indicates the draw is substantially less. One
boat builder in Houston indicated that the total draw of 12 units was under 2
amps. The efficiency of the driver board makes this type of amp draw
attractive for current constrained applications including small equipment, ATVs,
boats and other applications where banks of batteries without significant
alternator support are the sole source of power. These units are also ideal for
use in manufacturing and industrial operations as machine lighting where severe
vibration and excessive amounts of dirt and grime may be
encountered. |
Heat Management: Heat
is the single largest factor in premature LED failure and color shifting. As a
result, many manufacturers reduce the output of their LEDs to reduce the amount
of heat produced. These LED light bars utilize an extruded aluminum housing that
incorporates an advanced heat radiating fin design which dissipates heat
efficiently to produce the maximum amount of power and longevity from the
integrated Edison Edixeon® Emitters. The end result is more light and longer LED
life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to adjust
input current to maintain the correct LED voltage levels regardless of input
levels across a specific range. These LEDLB series light bars can operate on
current ranging from 9 to 42VDC without any modifications necessary as a result.
This multi-voltage capability makes these units ideal for mobile and stand alone
applications such as those found on commercial boats, heavy equipment and
vehicles where power systems don’t always operate with 12 volts and external
generators, transformers or inverters are impractical.
LEDLB-4-P 35° Flood
Beam (Opt) |
LEDLB-4-P 10° Spot
Beam (Stnd) |

|
 |
Durability: The
LEDLB series of LED light bars from Larson Electronics offer IP67 rated
construction that is designed to withstand the rigors of demanding of
environmental and operating conditions yet are lighter and smaller than our
LEDLB-E series of extreme duty light bars. The LEDLB series is designed to
provide a low profile, light weight, high performance light bar that can be
mounted where other lights will not fit. These units can operate in temperatures
of -40 degrees Celsius to 80 degrees Celsius, are waterproof to 1 meter and
resist ingress of dust, dirt and humidity. The housings are formed from extruded
aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer
inherent LED resistance to shocks and vibrations contributing to these units
15.6Grms rating of vibration tolerance.
Mounting:
This light is equipped with a 4 inch square mounting plate with
four screw holes for secure attachment to flat surfaces and a 16 foot coil cord
ending in a cigarette plug connector. This permenent mounting base allows easy
and secure installation of this light on vehicles and equipment and will hold
the fixture securely under rough and high vibration conditions. An adjustable
hinge allows the operator to adjust the angle of the light once the unit is
installed.
Note: Most Larson
Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and
floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with
mating connector as part of a harness or pigtail, depending on the model. Some
larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different
Deutsch connectors.
|
Specifications / Additional
Information
LEDLB-4-P LED Light
Bar |
LEDLB-4W LED
Features |
LEDs: 4
Edixeon® 3 Watt LED Emitters |
Edixeon® 3 Watt LED Emitters |
Dimensions: 4"-L 3"-H 3.56"-D |
LEDs Driven At 80% |
Watts: 12 |
-40 C~ +80C Operating Temp Range |
Voltage: 9-42
VDC
Spot Beam: 90`L x 70`W
Flood Beam: 70` L x 60`W |
RoHS Compliant |
Weight: 1.8
Lbs |
70% Lumen Retention @65,000 hours |
Lighting Configuration:
10° Spot or 35° Flood
|
LED Chip Op Temp -40C to +125C
|
Mounting: 4"
Square Mounting Plate |
IP67 Rated Waterproof to 1 meter |
Wiring: Cigarette PLug |
|
Amps: 1 (on 12 volts) .5 (on 24 volts) |
|
Lumens: 720 |
Special Orders-
Requirements |
LED Light Color:
6000K or 3000K |
Contact us for special requirements |
LED Life Expectancy:
50,000 hours |
Toll Free: 1-800-369-6671 |
Optics Efficiency:
90% |
Intl: 1-903-498-3363 |
Materials: Aluminum Housing, Polycarbonate Lens |
E-mail: sales@larsonelectronics.com |
Housing Colors:
Black or White |
|
Lux-Flood :
@Lens: 185,800 @ 1 Meter 2,672 |
|
Lux-Spot : @Lens: 190,400 @ 1 Meter 8,440, @23` 168 |
|
CE Certified
3 year warranty replacement on this LED light. After 30 days,
the customer ships the failed LED light and/or LED bulb to Larson Electronics at
their expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When the
failed light is returned, Larson Electronics will ship a new
replacement. |
| Scroll Down to
Purchase-
| |