The Larson Electronics AVL-HAL-SOL-L810-LED-V1-30C Solar LED Strobe Light is an FAA AC 150/5345-43 Compliant unit with applications in aviation and hazardous locations. This lighting system contains a red LED strobe light, powered by a 30-watt solar panel with a 40aH lithium-ion battery pack. A remote-mounted day/night sensor automates activation and deactivation during use.
The AVL-HAL-SOL-L810-LED-V1-30C is an FAA Compliant solar-powered LED strobe light for signaling and notifications during aviation-related operations. This hazardous location lighting system consists of a 30-watt weatherproof solar panel, hazardous location LED strobe lamp (red), day/night sensor and 40aH lithium-ion battery pack.
LED Strobe Light: The hazardous location LED strobe lamp offers 1,050 lumens of red light, with a strobing rate of 30 Hz. Equipped with a 20° vertical and 360° horizontal beam spread, the unit provides syncing capabilities with multiple strobe lamps to 1/60 second. Syncing features are controlled by a master unit, catering up to 100 slave LED fixtures per master. Operators are provided access to a dip switch inside the LED lamp for selection between master and slave.
The lamp housing is waterproof, constructed of corrosion and chemical resistant polycarbonate with a red Pyrex globe, USCG accepted, ABS Type approved, and NEMA 4X compliant and suitable for hose-down areas. This hazardous location LED unit can survive heavy rains from all angles/directions, wind speeds up of 150 mph and 95% relative humidity. During use, the LED strobe light can also tolerate 130°F temperatures for 4+ hours and survive in salt-fog environments (Mil-spec salt fog test). For increased reliability in outdoor locations, this unit is resistant to UV radiation, which ensures no discoloration or cracking for 1 year.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Solar Panel/Sensor: The 30-watt solar panel is equipped with a 40aH lithium-ion battery pack. At full charge, the system is capable of operating for 36 hours without sunlight or 3 full evenings without light. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on very cloudy days, the unit will not recharge.
The solar panel is weatherproof and designed to catch the maximum amount of sunlight possible when properly mounted. The day/night sensor is programmed to activate the LED light when ambient lighting reaches 35fc (minimum); and deactivate the strobe lamp when ambient lighting reaches 60fc (maximum).
Wiring: The LED strobe light is connected to the panel by 10` of 16/2 SOOW cord that provides flexibility for positioning of the solar panel and equipment into their respective optimum locations independently of each other. A 30` cable connects the day/night sensor to the solar panel.
Mounting: The AVL-HAL-SOL-L810-LED-V1-30C is compatible with inverted ceiling, wall or surface mounting requirements. Operators may access one, 3/4" NPT hub on the unit for mounting the LED strobe light during installation. The mounting apparatus for the solar panel is designed to allow a variety of options, including flat surfaces, such as a wall and square or round pole mounting. The sensor is remote-mount compatible.
Applications: Aviation, airspaces, helipads, signaling, military, aircraft hangars, FAA compliance, hazardous locations, marine locations, outdoor sites, remote notifications, industrial sites and more.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|AVL-HAL-SOL-L810-LED-V1-30C FAA Compliant Solar-powered LED Strobe Light
Scroll Down to Purchase-
|Solar Panel Specs
||FAA AC 150/5345-43|
|Panel Dimensions: 14.3"-W x 27.89"-L x 3.19"-D
||Listed for United States and Canada|
|Weight: 15 lbs
||Class I, Division 2 Groups A,B,C,D|
|Ambient Temp: -45°C to +55°C
||Class I, Zone 2 Groups IIC,IIB,IIA|
|Runtime: 36 Hours (w/o Sunlight); 3 Full Evenings (w/o Light)
||Class II, Division 2 Groups F,G|
|Charging Time: 5 Hours
|Battery: (1) 40aH Lithium-ion Battery Pack
||NEMA 3, 4, 4X|
|Mounting: Surface or Pole
||UL 844 Hazardous Locations|
|Wiring: 10` 16/2 SOOW
||UL 1598 Luminaries|
||UL1598A Marine Luminaries|
|LED Strobe Light Specs
||CSA C22.2 No. 137 Hazardous Locations|
|Lamp Type: A19 LED
||UL 94-V-0 Flame Retardant|
|Lamp Dimensions: 5.94"-Diameter, 9.6" Height
|Weight: 3 lbs
||ABS Type Approved|
|Voltage: 12VDC or 24VDC
||150 MPH Wind Tolerance (Light)|
|Total Watts: 10W
||Exposure to 130°F (4+ Hours)|
||UV Radiation Resistant|
|Lamp Life: 50,000+ Hours
||Salt Fog Environment (Mil-spec Salt Fog Test)|
|Luminous Efficacy: 105 Lm/W
|Lamp Color: Red (Lens/Globe)
|Color Rendering Index: >80 CRI
|Beam Spread: 20° Vertical; 360° Horizontal
|Lighting Configuration: Strobe
|Strobe Rate: 30 Hz
|Power Efficiency: >95%
|Power Factor: 0.992
|Amp Draw: 0.84A @ 12V, 0.42A @ 24V
|Ambient Operating Temp Range: -50° C to +85°C
|Operating Temp Rating: T2D
|Relative Humidity: 95%
|Housing Material: Polycarbonate
|Lens Material: Hardened Borosilicate Glass
|Mounting Hub: (1) 3/4" NPT Hub
|Master/Slave Configuration: Up to 100 Slave Fixtures per Master
|Sync Controls: Master; to 1/60 Second
|Master/Slave Selection: Dip Switch
||Special Orders- Requirements|
|Sensor Type: Day/Night
||Contact us for special requirements|
|Sensor Activation: 35fc (Minimum)
||Toll Free: 1-800-369-6671|
|Sensor Deactivation: 60fc (Maximum)
|Sensor Configuration: Remote Installation
|Sensor Wiring: 30` Between Sensor and Panel