Made in the USA
The Larson Electronics EPL-EMG-48-2L-LED-125VDC Explosion Proof Emergency LED Light Fixture is United States and Canada approved Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This failsafe explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.
This four foot, two lamp emergency LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-EMG-48-2L-LED-125VDC is equipped with Larson Electronics’ specially designed LED T-series bulbs which produce 7,000 lumens, resulting in 30% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.
We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This two lamp explosion proof LED linear fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.
This emergency backup LED light works, mounts and is wired like our EPL-48-2L-LED explosion proof LED light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one LED lamp for 90 minutes at 3,500 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.
This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.
Click Photo to Enlarge
Click Photo to Enlarge |
The included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent style LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.
Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. An EPL-EMG-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts. The EPL-EMG-48-2L-LED-125VDC is universal voltage, not multi-tap, and operates on 125V DC. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.
|Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 220V AC
|Amp Draw @ 240V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
(12hs/day @ 12c/kWh)
Our EPL-EMG-48-2L-LED-125VDC LED light fixture is U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.
|Made in USA Quality
||Superior LED Benefits|
1. Each unit dielectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
Specifications / Additional Information
|EPL-EMG-48-2L-LED-125VDC Explosion Proof
Scroll Down to Purchase-
|Listing: United States - Canada
||Class 1 Division 1, Groups C and D T6|
|Dimensions: W-11.25" x L-52" x H-8.5 "
||Class 1 Division 2, Group A,B,C,D|
|Weight: 60 Lbs
||Class 2, Division 1 & 2, Groups E,F,G|
|Voltage: 125V DC
||UL 595 Marine Type (Saltwater)|
|Total Watts: 56 watts (28 Watts Per Lamp)
||UL 844, UL 924|
|Total Lumens: 7,000 (3,500 Per Lamp)
||UL 1598 Marine Type|
|Lumens on Battery Power: 3,500 (1 Lamp)
||Certified Canadian Standards|
|LED Lamp Life Expectancy: 50,000+ Hours
||Listed for Paint Spray Booths|
|Luminous Efficacy: 125 Lumens per Watt
||California Title 24 Compliant|
|Color Temp: 5600K, 4500K, 3000K
||IP67 Rated - Waterproof|
|Color Rendering Index: >80
||T6 Temperature Rating|
|Beam Angle: 150°
|Power Efficiency: 90%
||LEL Listed LED Lamps|
|Power Factor: >0.95
||Approved for Confined Spares|
|Battery AC Input Voltage: 125V DC
|Battery AC Input Current: 90 mA
||Factory Sealed Fixture|
|Battery AC Input Power Rating: 9.5W
|Battery Output Current: 125V @ 165mA
||Emergency Battery Backup|
|Illumination Time: 90+ Minutes
||90+ Minute Runtime|
|Battery Type: High Temp, Maintenance Free, Nickel Cadmium
|Battery Lifespan: 7 to 10 Years
||Made in the USA|
|Battery Charge Current: 250 mA
||Switch Leg for Powering Light On/Off|
|Battery Recharge Time: 24 Hours
|Ambient Operating Temp Range:0° C to +50°C
|Operating Temp Rating: T6 Rated
|Minimum Operating Temp: 0°C
|Maximum Case Temp: +50°C
|Housing Material: Cast Aluminum End Caps & Battery Enclosure, Aluminum Reflectors - Copper Free
|Lens Material: Hardened Borosilicate Glass Tubes
|Gasket Material: Buna Rubber O-Rings
||Special Orders- Requirements|
|Mounting: Surface Standard - Pendant Optional
||Contact us for special requirements |
|Wiring Hub: 1/2" NPT
||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*
|U.L Approval: U.S Certificate Canada Certificate