Made in the USA
The HAL-JH400-120 from Larson Electronics is a Metal Halide Hazardous Area Light Fixture that produces 34,000 lumens of light capable of illuminating an area 18,000 square feet in size. Weatherproof and U.L. listed for marine use, this metal halide fixture is a versatile and ideal exterior lighting solution for both Class I Division 2 Groups A, B, C & D hazardous areas as well as non-hazardous locations. This metal halide fixture comes attached to an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders, handrails, catwalks and other similar structures. The HAL-JH400-120 can operate on either 125V or 250V and is equipped with 50` of 16/3 SOOW cable that is terminated in an explosion proof cord cap.
The versatile HAL-JH400-120 bracket mounted metal halide fixture from Larson Electronics is weatherproof and comes with an adjustable aluminum ladder/bracket mount that makes it ideal for use in industrial applications, maintenance, cleaning and servicing duties, large open space hazardous work areas and any Class I Division 2 Groups A, B, C & D area where ladders, scaffolding and other railings provide opportunities for mounting. The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive closure screws for easy servicing.
The aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces providing corrosion resistance, durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the higher pulse ratings of newer HID systems. Bulb is not included with with this fixture.
The lamp housing on this unit is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive closure screws for easy servicing. The optical assembly includes a precision-formed aluminum reflector and a thermal shock, impact-resistant lens. This metal halide light fixture also features continuous silicon gasketing, corrosion resistant external hardware and a trunnion mounting bracket with stainless steel hardware for mounting.
This hazardous area light is U.L. rated Class I Division 2, Groups A, B, C & D and suitable for wet locations with IP66 and NEMA 4X ratings. The integral pulse start ballast is protected within the weatherproof housing and operates on 120-277V AC voltages. This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes present. The multi-purpose design of this fixture makes it a popular choice for industrial applications regardless of whether the locations are designated hazardous or not.
This light is highly durable, produces high light output in a wide flood pattern and operates effectively at temperatures to -20 degrees F. Mounting is via an adjustable coated steel trunnion bracket that allows the fixture to be attached to walls or ceilings and provides secure adjustment and positioning. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an electro-coat dark bronze paint finish. Wiring is through a convenient wiring box located on the bottom of the heavy duty housing which has a 3/4" NPT conduit entrance.
Click Here for Lamp Instructions
LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc.
LAMP TIGHTNESS: Mogul Base Lamp: The lamp should be securely inserted to the NEMA-EEI specified torque of 35 inch-pounds which is best achieved by very firmly tightening to ensure application of sufficient torque. Tightening must be sufficient to fully depress and load the center contact of the socket.
WIRING: Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that supply voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90°C minimum insulation) is recommended for making electrical connections to the P-154. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size 3/4" NPT threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division 2 Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector. Verify the correct supply voltage and lamp wattage.
Note on Lamps: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer`s recommendations and restrictions on lamp operation, particularly ballast type, burning position, etc.
Click Photos to Enlarge|
5-15 Straight Blade Plug
5-20 Straight Blade Plug
6-20 Straight Blade Plug |
Wiring & Plug: This explosion proof metal halide light is equipped with 50 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.
Mounting: The HAL-JH400-120 is equipped with a lightweight aluminum ladder bracket with adjustable J-hook bottom that allows operators to securely mount the light to any rail, ladder or scaffolding. The J-bracket can adjusted 26 inches to 43 inches to allow mounting to ladders, scaffolds and similar structures of various sizes. The center mount pole is adjustable and can be elevated to three feet above the mounting bracket, helping to improve coverage and reduce glare.
Click Photo to Enlarge |
Suggested Applications: Catwalks, ship rails, etc. making this explosion proof light useful in ship yards, boat yards, plants, tanks, vessels, fuel cells, barge repair and oil field applications.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
|Made in the USA Quality
||Metal Halide Benefits|
1. High Efficiency Metal Halide lamp.
2. 85 Lumens per Watt
3. Rugged Die Cast Aluminum Housing.
4. Hinged Lens Door - Tempered Glass.
5. Heavy Duty Door Gasket.
6. Socket: Mogul Base Handles Higher Pulse Ratings of Newer HID Systems.
7. Low Maintenance.
8. Adjustable Ladder/Rail Mount - Corrosion Resistant.
9. Electro-Coat Dark Bronze Paint Finish
10. Effective at temperatures to -20 Degrees F.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering..
5. Vibration and shock resistant.
6. Low maintenance.
Specifications / Additional Information
|HAL-JH400-120 Metal Halide
Scroll Down to Purchase-
|Lamp Type: Metal Halide
||Class I Division 2 Groups A,B,C,D|
|Light Head Dimensions: 25"H x 17"W x 11"D
||Class I, Zone 2, Groups llC,llB,llA|
||Suitable for Wet Locations|
|Lumens Per Watt: 85 Lm/W
|Voltage: 125V or 250V
|Lighting Configuration: Flood Pattern
||Click Here to View Dimensional Schematic|
|Beam Spread: 7 (146°) x 6 (119°)
|Mounting: Adjustable Ladder/Rail Bracket
|Weight: 45 lbs
|U.L. Listing: Outdoor Marine Approved
||Special Orders- Requirements|
|Total Lumens: 34,000
||Contact us for special requirements |
|Wiring: 50` 16/3 SOOW Cord w/ Explosion Proof Cord Cap
||Toll Free: 1-800-369-6671|
|Cord Cap Options: 5-15P, 5-20P or 6-20P
|Warranty: YES - 5 Years*