Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military
and security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only
source for the Golight Stryker Remote Control Spotlight with magnetic
View More Information
Larson Electronics stocks a comprehensive line
of hunting lights and related accessories. Our hunting lights include
rechargeable handheld LED spotlights and HID spotlights with red
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks
an extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including
explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
infrared LEDs, LED
boat lights and industrial light towers. Larson
Electronics also manufactures and distributes a wide range of HID high power spotlights and HID flashlights that
are ideal for use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that
are particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights, rechargeable flashlights, led flashlights,
high intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an
extensive line of military spotlights, floodlights, and military grade lighting accessories and
Many of Larson Electronicss
lighting products can serve equally well in the public and private sector as
camping lights, off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and
LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large
distributor of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights
for hunting and off-road use. Larson Electronics is the only source for the
Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks
a wide range of explosion proof lights and products as well as intrinsically safe lights and intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights, explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly
develops and manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of
military and law enforcement related accessories including the concealable, back
up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
If you have any questions or
special requirements regarding any of our industrial grade lighting solutions
please contact us by E-mail at firstname.lastname@example.org You can also call us toll free at 1-800-369-6671.
Purchase orders can be faxed to us at 903-498-3364 Larson
Electronics can provide detailed technical information regarding any of its
products and is capable of working with customers to create unique lighting
solutions to suit their needs and requirements.
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the
military/law enforcement industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a manufacturer
and as such we maintain a large available inventory of our magnetic mount
spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics
can also be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
EPL-48-2L - Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 2 Lamp - 4 foot
Part # EPL-48-2L Price:
Hoja de Especificaciones
Made in the USA
The Larson Electronics EPL-48-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1 and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The unit carries a T6 temperature rating, it is also approved for Paint Spray Booths.
The EPL-48-2L fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. Lamp choices include T5HO, T12HO, and T8. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs mostly for longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions, and T-12HO bulbs operate well in those environments. Larson Electronics offers a T12VHO lamp option, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
|Amp Draw @ 120V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
||5000K / 4100K
|Operation cost per year
(8hs/day @ 11c/kWh)
Click here to see the LED version of this fixture
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Surface Mount (Standard) |
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Pendant Mount (Optional) |
Click Photo to Enlarge
3 Conduit Positions
Click Photo to Enlarge |
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)
F54-T5/841/HO - 54 watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)
F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color (Suffix –T12HO)
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)
F36-T8/841 – 36 watt, 3350 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)
T12HB with magnetic ballast for high heat configurations ("hot box" explosion proof light applications) - 60 watt, 4050 lumens per bulbs - This bulb, ballast and wiring configuration is designed for applications to 165 degrees C.
Specifications / Additional Information
|EPL-48-2L Explosion Proof
Scroll Down to Purchase-
|Listing: United States - Canada
||Class I Division 1, Groups C and D T6|
|Dimensions: W-11.25" x L-52" x H-8.5 "
||Class I Division 2, Group A,B,C,D|
|Weight: 65 Lbs
||Class II, Division 1 & 2, Groups E,F,G|
|Voltage: Universal 120-277VAC 50/60 Hz
||UL 595 Marine Type (Saltwater)|
|Total Watts: 108W (T5HO, 64W or 72W (T8), 120W (T12HO)
|Total Lumens: 10,000 (T5HO), 5,900 (T8), 8,100 (T12HO)
||UL 1598 Marine Type|
|Lamp Life Expectancy (Hrs): 20,000 (T5HO), 24,000 (T8), 12,000 (T12HO)
||Certified Canadian Standards|
|Luminous Efficiency (Lm/W): 95.59 (T5HO), 92.19 (T8), 67.5 (T12HO)
||Listed for Paint Spray Booths|
|Color Temp: 5000K (T5HO/T8), 41000K (T5HO/T8), 4000K (T12HO), 3000K (T8)
|Beam Angle: 150°
||California Title 24 Compliant|
|Ambient Operating Temp Range: -20°C to +70°C
||IP67 Rated - Waterproof|
|Operating Temp Rating: T6 Rated
||T6 Temperature Rating|
|Minimum Operating Temp: -30°C
|Maximum Case Temp: +90°C
||Approved for Confined Spares|
|Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free
|Lens Material: Hardened Borosilicate Glass Tubes
||Special Orders- Requirements|
|Gasket Material: Buna Rubber O-Rings
||Contact us for special requirements |
|Mounting: Surface Standard - Pendant Optional
|Wiring Hub: 1/2" NPT
||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*
|U.L Approval: U.S Certificate Canada Certificate
|*Temperatures above +65° C will diminish ballast life from 5 years to 3 years
Click here to view the Explosion Proof Light Design Description|
9.42 / 10
19683 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
How Much Light is Enough Light
Lighting choices vary, depending on the needs of the applicable location and personal preferences of individuals in the area. A “one size fits all” solution is rarely available when determining the lighting requirements of multiple environments. For example, lighting configurations for an office may differ, compared to a packaging warehouse. Even if the two facilities were the same size, the type of work being carried out in the buildings dictate the properties or characteristics [...]
Understanding Explosion Proof Lighting Classes Divisions and Groups
The concept of explosion proof light ratings can be confusing to understand. Hazardous workplace conditions can vary greatly and that means that a comprehensive rating system becomes necessary in order to ensure a safe work environment. [...]
Lumen vs Foot-Candles – Which Is More Accurate for Measuring Illumination?
When a customer is looking for lights, the most common question posed is “how bright is this light?” As lighting technology improves, the standard measurements of illumination aren’t always the most accurate in calculating a light’s output. Understanding how each rating is determined will help you choose the best fixture for an application. [...]
The Future of Lighting: No More Lamp Servicing or Maintenance?
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
LED versus Fluorescent: Lumens per Watt is Only Part of the Story
Today it is commonplace to find T8 fixtures producing on the order of 80 to 100 lumens per watt of output, putting fluorescent lighting at the top of the efficient lighting ratings in terms of lumen per watt efficiency. However, this does not tell the whole story, and other factors come into play which affect the real world efficiency of fluorescent lighting and brings it a little more down to earth. [...]
Choosing Spray Paint Booth Lighting and Booth Design
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...]
Paint Booth Lights for Modern Paint Types
Paint manufacturers have taken these physical properties farther, and now use various pigments and materials to enhance the reflective or absorption properties of other materials to produce colors of exceptional intensity and hue. The problem for paint booth operators is obvious; with such complexities introduced into paint coloration and characteristics, being able to accurately match or reproduce colors is made more difficult. When light hitting an object does not contain a full spectrum of co [...]
Paint Spray Booth Lighting Fundamentals
Of huge importance to paint spray booth applications is the safety regulation compliance of the lighting equipment and its suitability for use in a hazardous environment. Due to the flammable nature of the chemicals and compounds used within the booth, removing potential sources of ignition is critical. Since any electrical equipment used is a potential source of heat, sparks or flame, it must be properly designed and certified for use in hazardous locations. Paint spry booth lighting that is mo [...]
LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
How Do You Know If a Light is really Explosion Proof?
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
Spray Booth Lights: Which Type for Best Results?
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
Confined Space Lighting for Hazardous Locations
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]
“Explosion Proof”: Its Not Just a Label
Hazardous work areas are one of the most demanding environments for the workers and equipment that must operate within them. The often confined spaces combined with the presence of volatile materials presents a serious danger of fires and explosions that must be adequately addressed to insure the safety of workers and the public in both the work space and the surrounding area. [...]
Explosion Proof and Intrinsically Safe: There is a Difference
When it comes to explosion proof lighting many people have trouble understanding exactly what the term means. Factor in that there is also the term “intrinsically safe light” which is related to explosion proof lighting, and the fact that few people have had the benefit of a good layman explanation of the terms, and it becomes clear that there is plenty of room for confusion. [...]
Explosion Proof Lights: Lessening the Danger in Hazardous Work Areas
Hazardous work areas present special challenges for the workers and businesses that must operate within them. These work areas are often confined rooms or containers like fuel tanks where vapors and gases from work activities can become concentrated to dangerous levels. As well as the obvious dangers posed by inhalation of these contaminants are the not so obvious dangers that can have lethal consequences if not properly addressed. [...]