The Larson Electronics
EPL-LED-150W-RT-JB2-20-EPP Explosion Proof LED Flood Light fixture provides
operators with a powerful and energy efficient alternative to traditional
hazardous location luminaries. LED technology and compact design makes this lamp
an excellent replacement upgrade option for bulky and high maintenance cost
older fixtures. This unit is equipped with a rear access wiring hub and terminal
Class I Division 2, Class II Divisions 1 & 2 explosion proof LED flood light
fixture provides 17,500 of high quality light while drawing only 150 watts. The
copper free aluminum alloy body is powder coated for added durability and an
attractive aesthetic appearance. Special heat dissipating design in conjunction
with LED technology helps this fixture to achieve an excellent 60,000 hour rated
lifespan with 80% lumen retention. Light weight and a low profile make this unit
an attractive alternative to larger and heavier older fixtures and requires less
hardware to install.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no
filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce
light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied, providing instant illumination with
no warm up or cool down time before re-striking. Because there is no warm up
period, this light can be cycled on and off with no reduction in lamp
lights run at significantly cooler temperatures than traditional metal halide
and high pressure sodium lights and contain no harmful gases, vapors, or
mercury, making them both safer and more energy efficient. No extra energy is
wasted in cooling enclosed work areas due to external heat emissions from bulb
type lights, and the operator risks associated with traditional lighting
methods, such as accidental burns and exposure to hazardous substances contained
in the glass bulbs, are eliminated. In addition, LEDs are also safer for the
environment as they are 100% recyclable, which eliminates the need for costly
special disposal services required with traditional gas burning and arc type
LED Drivers: Even
in LED fixtures, heat is the single largest factor in premature light failure
and color shifting. As a result, many manufacturers reduce the output of their
LEDs in order to reduce the amount of heat produced. Rather than lower light
output or quality, Larson Electronics addresses this problem with the addition
of electronic LED drivers. These internal drivers provide the ability to
automatically monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. This not only
reduces the energy dissipation, effectively lowering the operating temperature
of the fixture, but also prevents AC over-voltage and short circuit loading
making this fixture virtually maintenance free. Because the electronic drivers
allow the EPL-LED-150W-RT-JB2-20-EPP to run at a cooler internal temperature and
regulates the electrical current, energy efficiency and LED service hours are
maximized while at the same time reducing operating costs and downtime incurred
from the frequent servicing intervals required with other hotter running
explosion proof LED light fixture features multiple LED drivers which helps to
increase the operational life of the fixture. With traditional LED lights, in
the event an LED array or driver fails, the entire fixture no longer
illuminates. With the EPL-LED-150W-RT series of explosion proof lamps from
Larson Electronics, each LED fixture contains six individual LED boards
configured in a series of banks. Each bank contains two LED on a single board
with an individual driver. In the event of a driver failure, only one bank of
LEDs will be effected while the other banks will continue to operate. In the
event that of an LED failure, the mating LED will continue to
Click Photos to
60° Beam Angle
125° Beam Angle Plug
140° Beam Angle Plug
Beam Angles: When
used as a portable lighting solution, the varying beam angles are each
individually ideal for several environments. The 60° beam provides the most
intense beam of the three options. It is perfect for narrow, confined spaces and
is ideally suited for tank cleaning purposes. It offers focused light to provide
ample illumination to tight work spaces and other environments. The 125° beam
offers a more diffused source of light that is also less intense in brightness.
It is a great general area work light and performs well when used for outdoor
illumination. The 140° beam offers a very wide lighting pattern and is ideal for
situations where lighting distance is not a concern, but illumination of a wider
area and even light distribution is. The 140° beam is great for situations that
call for working in close proximity to lights such as in a paint
explosion proof LED flood light produces a total of 17,500 lumens with a color
temperature of 5000K standard and a color rendering index of 75 which produces
colors and details much more accurately than high pressure sodium or mercury
vapor luminaries. This lamp uses Cree LED units that have been chosen for their
high lumen per watt ratio and extreme longevity. These Cree LEDs generate a
robust 86.67 lumens per watt effective lumen output and have a 80% lumen
retention at 60,000 hours, giving them better efficiency and operational life
than traditional light sources.
Serviceability: This explosion proof LED light fixture is field
serviceable. All major internal components can be purchased from Larson
Electronics and installed by a licensed electrician with basic tools. With most
explosion proof fixtures, the fixture must be returned to the manufacturer for
repair work, which presents downtime and long turn around times for repair work.
Larson Electronics addresses this issue with the EPL-PM-150LED-RT series with
field serviceability, allowing operators to perform service work without having
to return the fixture to the manufacturer in the event of damage or
|Amp Draw @ 120V
|Amp Draw @ 220V
|Amp Draw @ 240V
|Amp Draw @ 277V
|Amp Draw @ 12V
|Amp Draw @ 24V
|Operation cost per
(12hs/day @ 12c/kWh)
Each LED light fixture has the
potential to save $150.00+ per year in electricity alone, not including
maintenance costs, operational downtime, reduced productivity, HVAC loads, or
carbon footprint. When retrofitting an entire facility with 100s of light
fixtures, the return on investment of LED over metal halide becomes
light is universal voltage capable and can be operated with 100-277V AC, 50/60
Hz without modifications to the fixture. A low voltage version of this LED
fixture that operates on AC/DC voltages from 11-25 volts for rigs and vision
systems and 18-48V AC/DC voltages are available for network systems and
marine vessels. We also offer an additional 347-480V high voltage and 0-10V
dimmable versions of this explosion proof LED light fixture.
Wiring & Plug:
This explosion proof flood light is equipped with 20 meters of 16/3 chemical and
abrasion resistant SOOW cord that is fitted with a hazardous location 2-pole
3-wire pin and sleeve plug. This plug is rated for 16 amps and is suitable for
EX II 2 G, EEx ed IIC T6, Ex II 2 D IP 66 T80°C, and IP66 rated. This hazardous
location plug features polyamide construction, recessed brass pins, a 16 amp
current rating, and offered in voltage ratings of 100-130V AC or 200-250V
Applications: This pedestal base stand explosion proof light is ideal
for any application Class I & II, Divisions 1 & 2 explosion proof or
hazardous location environment requiring durable and quality lighting in a
portable form factor.
Applications include but not
limited to aircraft maintenance, alcohol processing, aerospace, chemical
manufacturing, coke processing, cold storage, compressed natural gas (CNG)
facilities, cranes, cryogenics, distilleries, food processing (with food grade
gasketed polycarbonate lens: EPL-HB-150LED-RT-188),
fuel storage, gas processing plants, grain processing, laboratories, liquefied
natural gas (LNG) facilities, liquid propane gas (LPG), manufacturing, marine
vessels, methane production, mining, offshore, oil drilling rigs, oil
refineries, paint spray booths, paper processing, petrochemical,
pharmaceuticals, power plants, production refineries, sand blast cabinets,
sewage and septic tanks, shipyards, solvent and cleaning areas, storage
facilities, tank farms, tankers, textile, washdown areas, waste treatment
plants, and woodworking. Click
here to read the NEC description for explosion proof and hazardous
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message firstname.lastname@example.org
for more information about our custom options tailored to meet your specific
1. Low power consumption.
3. Fixture constructed of extruded corrosion resistant
copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS,
5. Retains 80% lumen output after 60,000 operating hours.
coated aluminum fixture body.
7. Pendant and Swivel Bracket mount
8. Low profile - Light weight
9. 17,500 Lumen output from only
1. 60,000 hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off - No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace