Made in the USA
The Larson Electronics
LM-SMWB-25-3S-4X250W-LED-CEE16 skid mounted fold over light mast provides a safe
and effective way for operators to quickly deploy 1000 watts of intense LED
lighting to elevations up to twenty-five feet. Four 550 watt equivalent high
output LED lights produce a wide spread of intense white light, allowing this
unit to effectively cover large work areas with high quality illumination. This
light tower is mounted onto a skid base and folds over for easy transportation,
features a rotating boom that allows for 360° of rotation, and a removable mast
head for storing mounted equipment when not in use.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
LM-SMWB-25-3S-4X250W-LED-CEE16 2000 watt telescoping steel light mast with 1000
watt metal halide equivalent LED light heads from Larson Electronics is designed
to quickly and safely deploy 1000 watts of intense LED lighting in locations
where elevated illumination is needed for maximum area coverage. This light boom
can be extended to 25 feet for maximum area coverage and collapsed to 12 feet
for applications where a footprint smaller is required. The tower is constructed
of square steel tubing with a lower section 12 feet in length and 4 inches in
diameter, middle section 10 feet in length and 3.5 inches in diameter, and an
upper section 7 feet in length and 3 inches in diameter. Each section has 2 foot
of overlap. The mast is elevated using an included 1,000 lbs hand winch with
3/16 inch cable and extended to its full height using a second 1,000 lbs
lighting system on this articulating light mast is comprised of four our of GAU-LTL-250W-LED
250 watt LED lamps producing 32,400 lumens of light each attached to the end of
the telescoping pneumatic light boom. These floodlights produce a wide flood
light pattern with a combined total of 1,000 watts and 129,600 lumens of light.
The GAU-LTL-250W-LED lights are ideal replacements for fragile and hot running
550 watt metal halide lamps, offering increased durability, longer lamp life,
and lower power consumption. The entire lighting assembly is connected to the
power source via a 4-switch control box. Each light head is on an individual
circuit and can be powered on or off independently of the other light
Heat is the single largest factor in premature LED failure and color shifting.
These LED units feature individual heat sinks per bank of six LEDs to control
heat buildup rather than utilizing a single housing to dissipate heat. This
allows for more thorough cooling of the LEDs for extended operating periods.
This allows the LEDs to be driven at up to 90% capacity without overheating or
visible loss of light output. The end result is more light with less heat and
longer LED life with an average 70% lumen maintenance after 80,000 hours. In
addition, should an LED failure occur, these LED flood lights are field
serviceable. Each bank of six LEDs can be replaced with the fixture installed.
This allows for the tower to stay in operation until repairs can take place, and
eliminates the need to remove and disassemble the entire fixture for
well as unparalleled heat control, the GAU-LTL-250W-LED series of LED lights
from Larson Electronics also offer IP67 rated construction that is designed to
withstand extremes of environmental and operating conditions. These units can
withstand rapid temperature changes of -40° Celsius to +80° Celsius, are
waterproof, and resist ingress of dust, dirt and humidity. The housings are
formed from die cast aluminum and the optics are high transmission PMMA with 98%
light transmittance. The Bridgelux® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We
use these LED lights for applications where a lot of vibration, dust, dirt,
dampness and abusive working conditions are encountered.
Click Photo to
The above image shows the
comparison of the traditional 1000 watt metal halide light plant such as our
LM-30-3S-4X1000W (left) to the LM-SMWB-25-3S-4X250W-LED-CEE16 LED light tower.
The area being illuminated by each tower is 300` in length and 250` in width.
Unlike the metal halide light plant, there are no hot spots with the LED plant.
This high output LED light plant provides an even beam spread over the targeted
work area without overcast, glare, light spillage, and wasted illumination.
Color rendering is also increased with LED light plants, providing a more
realistic night vision that more closely resembles natural daylight
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
floodlight is securely fastened to the mast head with an innovative trunnion
style stainless steel mounting bracket that allows the light to be adjusted
through 180° of vertical movement. To vertically adjust
the unit after mounting, the user simply loosens the screws located on either
side of the unit, moves it into the desired position, then re-tightens the
screws. The base of the mounting trunnion is equipped with several machined
slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning.
Click Image to Enlarge
Click Image to Enlarge
Click Image to Enlarge
LM family of telescoping towers feature a proprietary mast guidance system,
which provide increased stability during high winds. When lowered to 13.5 feet,
the mast can withstand winds up to 125 mph. The LM series of towers are powder
coated with glossy blue finish for corrosion resistances and aesthetics. A 52"
long mounting plate constructed of 2" by 2" by 1/4" thick carbon steel is
attached to the upper section of the mast which provides a strong and stable
platform for the four LED fixtures. This light mast is mounted to a 16` skid
base with four side skid pockets to allow for fork lifts and skid steers to
transport this unit from all four sides of the unit. A support arm at the end of
the skid supports the mast in the collapsed position. The weighted base allowes
this mast to be deployed without permamently mounting the mast, and includes
anchor holes to anchor the unit down for long term deployment.
light tower weighs approximately 600 lbs, can easily support and lift 150 lbs
fixtures. The entire tower assembly is shipped via common
freight carrier and when shipped measures approximately 16.5 feet long, 4 feet
wide, 5 feet tall and weighs approximately 1200 lbs. Larson Electronics can
custom tailor these units to the customer’s requirements with longer sections
and larger mounting plates. We also offer a choice of either the manual
1,000 lbs hand winches included standard or optional electric winches.
Suggested Applications: With its
easy deployment the LM-SMWB-25-3S-4X250W-LED-CEE16 is
ideal for use in applications that require regular
intensive cleaning and are exposed to a lot of vibration, dust, dirt, where
abusive working conditions are encountered, temporary lighting, and construction
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message firstname.lastname@example.org
for more information about our custom options tailored to meet your specific