Made in Texas
The Larson Electronics MPD-220V.1P-75KVA-380V.3P-MDS power distribution substation converts 220V AC single phase electrical current into 380V three phase power. This unit provides operators the ability to safely tap into and distribute single-phase 220V AC power from a variety of sources including generators and direct grid power.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*
Portable Power Distribution Purpose and Use
The MPD-220V.1P-75KVA-380V.3P-MDS portable power distribution system gives operators the ability to power their 380 volt equipment from a single system. On the primary side, operators connect single phase 220 volt line-in power via a customer provided cord cord. On the secondary side, operators can complete electrical connections from the secondary disconnect to compatible equipment.
Operation: A customer provided line-in cord brings 220V single phase power to the NEMA 3R 400-amp 220V single phase primary disconnect, which contains two 350-amp time delay fuses, and passes 220V single phase through to the primary panel, which contains a 220V single phase to three phase inverter, and passes 220V three phase power to the transformer. The NEMA 3R 75KVA transformer converts 220V single phase to 380V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a 480V three phase 200-amp NEMA 3R secondary disconnect, which features three 125-amp time delay fuses.
Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs for an additional cost. Larger units are available upon request, and can be equipped with skids or trailer mounted.
Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.
Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~
Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.
Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or firstname.lastname@example.org to discuss your specific requirements.