Made in the USA
from Larson Electronics is an LED floodlight tower with hydraulic mast that
offers tough and durable construction, reliable and efficient performance, and
high light output in an easy to operate, self-contained portable unit. This
floodlight tower features 4 powerful LED lights and PMMA high purity optics to
deliver 240,000 lumens of concentrated light. A 45 gallon generator mounted to a
steel trailer provides stand alone power for 80 hours on a single tank of fuel,
allowing operators to keep working no matter how remote the location.Capable of withstanding gusts of wind traveling up to 90 mph, a hydraulic mast makes for easy deployment by operators. Rugged IP67 rated construction designed to withstand the rigors of harsh outdoor conditions and grueling heavy duty use make this light tower an ideal choice for industrial applications, construction sites, marine use, mining, and emergency services.
The WCDE-4X500W-LED-MLK-MOD1 light tower features four 500 watt LED lamps that
produce 60,000 lumens each, for a total of 240,000 lumens of high intensity
light while drawing only 2,000 watts of energy. Each light fixture has the
individual power to brightly illuminate large areas and when combined, this
metal halide floodlight tower provides ample lighting for a wide variety of
Information: The WCDE-4X500W-LED-MLK-MOD1 from Larson Electronics is
equipped with 4 GAU-LTL-500W-LED
LED Flood Lights. The GAU-LTL-500W-LED LED Flood Light offers intense light
output and is ideal for flood lighting, high mast lighting, light towers, as
well as industrial and outdoor lighting applications. Producing 60,000 lumens, a
4.25 amp draw at 120V, 80,000 hour service life, 120-277 volt compatibility, and
IP67 waterproof rating, this LED flood light provides operators with a rugged
and powerful LED alternative to 1500 watt metal halide lamps that uses little
power and can withstand rugged use and abusive conditions.
Click Photo to
Click Photo to
Click Photo to
GAU-LTL-500W-LED LED light from Larson Electronics produces 60,000 lumens of
high intensity light while drawing only 500 watts at 5 amps from a 120 volt
electrical system. Fourty-Eight CREE® high output LEDs producing 963 lumens each
are arranged in rows and paired with PMMA high purity optics to produce a well
focused 24° wide spot beam that is ideal for providing far reaching concentrated
illumination while still covering a substantial amount of area. We also offer
optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood
beam spreads. The spot beams are tightly focused and are designed for high
elevation mounting to achieve distance, making spot versions ideal for high mast
and spots lighting. The flood beams are designed to provide more light over a
larger area nearer the fixture, making flood versions ideal for use as dedicated
work and area lights.
GAU-LTL-500W-LED lights are ideal
replacements for fragile and hot running 1500 watt metal halide lamps. They
offer low power requirements, high durability and a versatile mounting system
that makes these LED light emitters a superior lighting solution for demanding
applications where power and reliability is critical. The heavy duty design and
high power of these LED lights also makes them suitable for a wide array of
applications including but not limited to: high mast lighting, light towers,
light plant LED retrofits, military, mining, industrial manufacturing, machine
visioning, security and law enforcement, commercial structure illumination,
sport complexes, billboards, race tracks, and parking lots to name a
Click Photo to
The above image shows the
comparison of the traditional (4) 1500 watt metal halides light fixtures mounted
to a 30` light tower (left) to (4) GAU-LTL-500W-LED 500 watt LED light fixtures
mounted to a 30` light tower. The area being illuminated by each tower is 300`
in length and 250` in width. Unlike the metal halide light fixtures, there are
no hot spots with these LED fixtures. This high output LED light fixture
provides an even beam spread over the targeted work area without overcast,
glare, light spillage, and wasted illumination. Color rendering is also
increased with LED light plants, providing a more realistic night vision that
more closely resembles natural daylight
Light Head Heat
Management: Heat is the single largest factor in premature LED failure
and color shifting. These LED units feature individual heat sinks per bank of
six LEDs to control heat buildup rather than utilizing a single housing to
dissipate heat. This allows for more thorough cooling of the LEDs for extended
operating periods. This allows the LEDs to be driven at up to 90% capacity
without overheating or visible loss of light output. The end result is more
light with less heat and longer LED life with an average 70% lumen maintenance
after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-500W-LED
series of LED lights from Larson Electronics also offer IP67 rated construction
that is designed to withstand extremes of environmental and operating
conditions. These units can withstand rapid temperature changes of -40° Celsius
to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity.
The housings are formed from die cast aluminum and the optics are high
transmission PMMA with 98% light transmittance. The CREE® LEDs help these units
achieve resistance to vibrations and are rated at 70% lumen maintenance after
80,0000 hours of use. We recommend these LED lights for use in applications
where a lot of vibration, dust, dirt, dampness and abusive working conditions
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no
filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce
light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied, providing instant illumination with
no warm up or cool down time before re-striking. Because there is no warm up
period, this light can be cycled on and off with no reduction in lamp
lights run at significantly cooler temperatures than traditional metal halide
and high pressure sodium lights and contain no harmful gases, vapors, or
mercury, making them both safer and more energy efficient. No extra energy is
wasted in cooling enclosed work areas due to external heat emissions from bulb
type lights, and the operator risks associated with traditional lighting
methods, such as accidental burns and exposure to hazardous substances contained
in the glass bulbs, are eliminated. In addition, LEDs are also safer for the
environment as they are 100% recyclable, which eliminates the need for costly
special disposal services required with traditional gas burning and arc type
This lamp uses Cree LED units that have been chosen for their high lumen per
watt ratio and extreme longevity. These Cree LEDs generate a robust 120 lumens
per watt effective lumen output and have a 70% lumen retention at 80,000 hours,
giving them better efficiency and operational life than traditional light
Trailer: The telescoping hydraulic tower on this unit reaches 25.5`
when fully extended and folds to a compact 4.5` for storage and transport.
Hydraulic operation allows operators to easily raise, lower, or rotate the mast
through a full 359° of movement as needed. A stepping pad allows operators to
make adjustments from the ground with ease. The light heads are trunnion mounted
to the mast crosspieces using U brackets and can be individually adjusted while
the tower is in the retracted position.
Skid pockets allow the unit to be
moved with a forklift |
trailer features a formed and welded steel frame, 13" tires and wheels, a
5-point stabilization system, and a foldable tongue with a reversible ball
coupling/pintle hitch. The 5-point base consists of four 4` sliding outriggers
each with a drop leg jack (two at the rear and one on each flank) and a 1,000lb
stabilizing jack connected to the tongue. Both the main stabilizing jack and the
outrigger jacks can be manually adjusted to the desired position using hand
cranks. This 5-point design allows the unit to be operational in winds up to 55
mph. The reversible hitch consists of of a standard 2" ball coupling on one end
and a 3" pintle towing hitch on the other end. To switch ends, the operator
simply unbolts the hitch attachment, flips it to the desired end, and reinserts
the bolt. This trailer also features forklift pockets for easy lifting and
loading/unloading of the unit.
compact stowing dimensions of 6.76` x 4.6` x 4.5`, a 48` truck trailer can hold
18 of these light towers, and a 53` trailer can carry 20 units.
Click Photo to
Click Photo to
Generator: An 8kW
Marathon generator with a Kubota 11.7 HP engine provides stand alone power to
this light tower. Equipped with a fuel level indicator and an easy to reach
exterior fill neck, this generator has a 45 gallon tank and provides a minimum
of 80 hours of continuous operation. Because the WCDE-MVT-8KW-4X500LTL-LED light
tower uses LED lamps, it requires less fuel to run than traditional metal halide
lamps without sacrificing light output.
Click Photo to
Genset Protect system safeguards against the engine starting and stopping with
the AC power as well as ensuring the lighting system is turned off at both the
startup and shutdown of the unit. This model is equipped with a 12V electric
starter and a glow plug cold starting system. All of the operating components
are housed with a protective compartment with side lift up doors for easy access
to the controls and engine/generator assembly.
Construction, temporary lighting, road side illumination, plant turn
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message firstname.lastname@example.org
for more information about our custom options tailored to meet your specific
|Made in USA
1. High Efficiency LED Light Heads.
2. 4 - 500
Watt Lamps Producing 240,000 Lumens.
3. Rugged Die Cast Aluminum Lamp
4. Tempered Glass Lenses.
5. Copper Free Shell, Covers and Sealed
6. Vibration/Impact Resistant Construction.
8. Adjustable Lamp Brackets.
9. Galvanized Steel Tower w/
10. UL Approved for Marine Environments.
1. 80,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off - No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace safety.
15. California Title 24