Made in USA
The EXPSG-HVLED-10W-SAGN.2X12 Explosion Proof LED Light is Class I, Division 1 & 2, Groups C and D approved and rated for use in wet environments. The waterproof construction, bright white output, and long lamp life of this LED fixture provides operators with high output and low maintenance operation, making this high voltage LED light an excellent upgrade from shorter lived incandescent glass lamps. This LED light is mounted on a three-pivot gooseneck style mount, ideal for operators who cannot directly mount their sight glass light to the sight glass, or need positioning flexibility during inspections.
The EXPSG-HVLED-10W-SAGN.2X12 Explosion Proof LED Light is compact and powerful. This unit is equipped with a high voltage 10 watt LED lamp assembly that runs cooler and lasts far longer than traditional incandescent lamps, and produces high light output while operating on 120 to 240 volt AC current 50/60 Hz. This unit is UL 1571 approved for wet locations and ideal for use in small spaces within hazardous locations. The EXPSG-HVLED-10W-SAGN.2X12 is excellent for specific area lighting such as instruments, control panels, valve manifolds, walkways, etc.
The EXPSG-HVLED-10W-SAGN.2X12 is an excellent lighting solution for specific area lighting such as instruments, control panels, valve manifolds, walkways, etc. These sturdy lights are constructed of corrosion-resistant die cast aluminum alloy and are moisture-proof as well as explosion-proof (hazardous locations) so they are equally well suited for use in demanding installations indoors and out. Both spot and flood lamp configurations are available for particular applications.
The EPL-SMLED-20W LED light is equipped with a high output 10 watt LED emitter that produces 860 lumens of bright light while drawing only 10 watts @1/4 amp from a 12 volt electrical system. A single CREE XLamp MC-E® 10 watt LED producing 860 lumens is combined with high purity optics to produce a 40 degree floodlight beam 70`L x 65`W that is ideal for illuminating a wider area around the fixture. We also offer an optional 10 degree spot, 20 degree wide spot, or 60 degree flood beam configuration.
The LED lamp in this light offers greater output and longer life than halogen glass lamps, which improves work area visibility and reduces the need for maintenance and bulb replacements. This LED lamp has a 50,000 hour operational life, and produces as much light as a 50 watt halogen lamp while running far cooler and using only a fraction as much electrical power. This lamp is designed for low voltage operation and can be run from standard 120 through 240 VAC current without the need for additional transformers or hardware. This LED glass light is approved Class I, Division 1 & 2, Groups C and D and UL 1571 approved for wet areas, making it well suited to industrial locations where water resistance and explosion proof protection is mandatory.
Click Photo to Enlarge |
The EXPSG-HVLED-10W-SAGN.2X12 is mounted on top of a gooseneck mount, which features three pivot points allowing the light head to be rotated 360° and tilted 180°. The mounting base is 6" x 6" with two, 12" long, 1" x 1" aluminum rods, one between each pivot point, and stainless steel hardware, providing maximum flexibility. T-handles lock the pivot points in place.
Parts, Construction and Materials
• Luminaire body: Corrosion resistant die cast aluminum, G-Al Si 10 Mg
• Lens Holder: Unit of aluminum ring, glass
• Brackets: Die cast Aluminum, G-Al Si 10 Mg
• Weight: 7 lb. (3.2 Kg)
• Gaskets: Silicone rubber o-rings
Electrical Connection Installation
1. Disconnect main power supply
2. Remove side entrance cover
3. Attach power leads to terminal block
4. Replace cover insuring gasket (o-ring) is in place. Tighten.
5. Connect power
Connections to be in accordance with National Electric Code® Requirements
Specifications / Additional Information
|EXPSG-HVLED-10W-SAGN.2X12 LED Compact Light
Scroll Down to Purchase-
|UL Listing: United States & Canada
||Class I, Division 1 & 2, Groups C and D|
|Lamp Type: Cree LED
||UL 1571 Approved for Wet Locations|
|Total Watts: 10
||40°C Ambient Operating Temp|
|Beam: 10° Spot, 20° Wide Spot, 40° Medium Flood, 60° Flood
|Voltage: 120-240V AC 50/60 Hz
|Amps: 1/4 on 12 VDC
|Weight: 7 Lbs
|Mounting: Aluminum Gooseneck Style 3 Pivot Mount
||Special Orders- Requirements|
|Wiring: Terminal Block with Side Entrance Cover
||Contact us for special requirements |
|Operating Temp Range: 40°C ambient
||Toll Free: 1-800-369-6671|
|LED Lamp Life: 50,000 Hours
|LED Output Color: 6000K