Buy American Compliant
The Larson Electronics HAL-13-8W-LED-M-20C is a low voltage hazardous location lighting solution approved for Class I Division 2 environments and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 442 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. A single 100 lb magnet is mounted in the center of this LED strip light allows for mounting on any flat, magnetic metal surface.
The HAL-13-8W-LED-M-20C is designed to provide a high output and ruggedly durable lighting solution for applications where Class I Division 2 compliance is required. This low voltage hazardous area light can be operated with either 12 or 24 volt DC (choose below) current and includes 20ft 16/2 SOOW cord with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.
Durability/Mounting: The HAL-13-8W-LED-M-20C hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and protection against light water spray such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. A single 100 lb magnet is mounted to the center of the HAL-13-8W-LED-M-20C for convenient and reliable mounting on flat magnetic surfaces. The entire assembly weighs 0.7 lbs and measures 13.4 inches in length and 2.68 inches wide and 1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 130 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. These fixtures are offered with a clear or frosted lens. The frosted lens helps diffuse the light, providing a more even spread. The clear lens will provide no diffusion.
Wiring/Power: These hazardous location LED lights are equipped with a 20ft 16/2 SOOW cord containing a standard two wire (White+ Black-) connecting configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 10 watts .66 amps on 12V DC and .33 amps on 24V DC.
Versatility: The HAL-13-8W-LED-M-20C is ETL approved for Class I Division 2 Groups A, B, C & D locations. This unit carries an IP56 waterproof rating ensuring protection against limited ingress from dusts, dirt, oils and full protection against water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|HAL-13-8W-LED-M-20C Hazardous Location Magnet Mount LED Light
Scroll Down to Purchase-
|Lamp Type: LED
||Class I Division 2 Groups A,B,C,D|
|Dimensions: Lamp 13.38"-L 2.68" -W 1.69"- D
||CSA 22.2 No. 250.0|
|Weight: 0.7lb | 0.3 k g
||IP54 Ingress Protection|
|Voltage: 12V DC (11-16V DC) - 24V DC (22-28V DC)
||T3 Temperature Rating|
||Convenient Magnet Mounting|
|Lamp Life Expectancy: 100,000 Hours
|Lumen Efficacy: 130 lm/w
|Amps: 0.66 A @12V DC | 0.33 A @ 24V DC
|Light Color: 6500K
||Special Orders- Requirements|
|Beam Type: 100° Flood or 30° Spot
||Contact us for special requirements |
|Mounting: (1) 100 lb Magnet
||Toll Free: 1-800-369-6671|
|Temp Range: -40°C - +85°C
|Wiring: 20ft 16/2 SOOW cord | White: + Black: -