The Larson Electronics EXP-MS-30W-N4X-SFC Explosion Proof motion sensor is approved Class 1 Division 1 & 2 and Class 2 Division 1 & 2 and the ability to power lights or other equipment within hazardous locations based on motion triggers.
This explosion proof motion sensor is ideal for operators seeking a high quality explosion proof motion sensor rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1. This explosion proof motion detector can be mounted at heights ranging from 11.5` up to 23` above the ground and provides up to 13` by 16` coverage when mounted at 16`. The entire unit is constructed of malleable non sparking aluminum construction with a glass window for viewing the indication lights inside. This unit is flat surface mounted. The explosion proof housing provides two 1/2" or 3/4" hub openings located on either side of the housing for running electrical conductors in a feed through configuration. A bushing seal at each conductor opening prevents damage to wiring insulation.
This unit leverages cutting-edge microwave sensors to detect motion. When in use, the device sends out discreet waves that are reflected back from nearby walls and objects (not heat or light). Microwave sensors are not affected by line of sight, resulting in wider and more accurate coverage of the target area. By comparison, traditional infrared sensors can only detect heat and light (factors used to identify movement) within the unit’s field of view. Microwave sensors also provide stable performance in unpredictable climates and can penetrate glass, plastic and other non-metallic objects.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
This unit is designed to operate on low voltage 12-24V AC or DC electrical systems, and is suitable for use in environments where combustible dusts and particulates may be present.
1/2" or 3/4" NPT tapped conduit openings are provided on either of the unit in feed through versions while dead end versions have a single conduit hub, providing easy and secure connection to main power line supplies.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|EPL-SW1 Explosion Proof Tumbler Switch
||Certifications - Compliance|
Scroll Down to Purchase-
|Listing: United States
||Class I, Division 1 & 2, Groups B, C, D|
|Dimensions: 7"-W x 5"-H x 9"-D
||Class II, Division 1 & 2, Groups E, F, G|
|Detection Coverage:13` x 16` (when mounted at 16`)
||Class 1, Zone 1, AEx d llc|
|Tilt Angles: -90° to +30° in elevation
||EExd IIC, IP66|
|Max Contact Voltage: 42V AC/DC
|Max Contact Current: 1A (resistive)
||NEMA 7 (Groups B, C, D)|
|Max Switching Power: 30W (DC) / 60VA (AC)
||NEMA 9 (Groups E, F, G)|
|Output Hold Time: 0.5-9 seconds (Adjustable)
||EMC: 2004 / 108 / EC|
|Reaction Time: 100 ms
||R&TTE: 1999 / 5 / EC|
|Minimum Detection Speed: 2.2in/s
|Mains Frequency: 50/60 Hz
||Special Orders- Requirements|
|Ambient Temperature Range: -22°F to +140°F
||Contact us for special requirements |
|Radiated Frequency: 24.125 GHz
||Toll Free: 1-800-369-6671|
|Transmitter Radiated Frequency: <20 dBm, EIRP
|Radiated Power Density: <5 mW/cm2