Made in the USA
The LM-10-5-3S-FM from Larson Electronics is a 3-Stage Light Mast with Cord Reel Mounting Plate that provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to ten feet. This light tower features a rotating boom that allows for 360° of rotation, a cord reel mounting plate and a T-head component at the top of the pole. The heavy-duty mast comes with a wide foundational base at the bottom of the pole for support.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
This telescoping three stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 10' for effective coverage. This light boom can be extended to 10' for maximum area coverage and collapsed to 5' for applications where a smaller footprint is required. The mast is elevated by pressing down on the end of base stage, elevating the mast into the upright position. The mast is extended to its full height using an included 1,000 lbs hand winch with 3/16" galvanized cable.
The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics or galvanized for superior corrosion resistance. A 44" T-head mounting plate is attached to the upper section of the mast which provides a strong and stable platform for light fixtures and equipment. The LM-10-5-3S-FM also features a cord reel mounting plate. The mounting plate measures 12" x 9" and is located at the base stage of the light mast above the winch. This component is also powder coated in glossy blue to match the mast.
The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 5', the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely, and can typically be rotated with a single hand.
This light tower weighs approximately 150 lbs and can easily support and lift 125 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 8' long, 4' wide, 5' tall and weighs approximately 375 lbs. Larson Electronics can custom tailor these units to the customer's requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winch included standard or optional electric winch.
Mounting: The LM-10-5-3S-FM is offered with a wide base at the bottom of the mast for robust support. This feature utilizes a wide foundational base at the bottom of the pole with two bolts at every corner (total of 8). A total of four vertical right-angle plates, located at every side of the square pole, provides additional support for the foundational base, ensuring it does not warp or bend.
Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E , LEDLB-160X2E or LEDLB-80x2E.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|LM-10-5-3S-FM - Three Stage Telescoping Light Tower
-Scroll Down to Purchase-
|Length: Telescoping from 5' to 10'
||5' to 10' Foot Light Mast |
|Weight: +-150 lbs
||Steel Construction |
|Capacity: 125 lbs
||Corrosion Resistant Finish|
||Removable Mast Head |
|Finish: Powder Coated (Gloss Blue) or Galvanized
||125 mph Wind Resistance |
|Operation: (1) 1,000lbs Manual Winch, Electric Optional
||Manual or Optional Electric Operation|
|Cable: 3/16" Aircraft Cable
||Cord Reel Mounting Plate|
|Top Mast: T-head
|Mounting: 12" x 9" Cord Reel Mounting Plate
||Special Orders- Requirements|
|Anchor Bolts: (8) Bolts w/ Wide Foundational Base
||Contact us for special requirements |
|Shipping: Common Freight
|Shipping Dimensions: 8'-L x 4'-W x 5'-H
||Toll Free: 1-800-369-6671|
|Shipping Weight: +-375 lbs
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements