Buy American Compliant
The LLP-CAT-TR-MT765B-V1 LED Tractor Light Package comes with four LEDEQ-3X3-CPR LED Work Lights that come with a Flood Beam configuration for use as back top cab flood lights. The LLP-CAT-TR-MT765B-V1 also includes two LEDEQ-3X3-CPR LED Work Lights that come in a spot beam configuration for use as back top cab spotlights. Lastly, the LLP-CAT-TR-MT765B-V1 includes two LED25WRE-CPR LED Work Lights to use as top front flood lights. The LLP-CAT-TR-MT765B-V1 LED Light Package is ideal for installation and use on a Caterpillar Cat Challenger MT 765B Tractor. Each LEDEQ-3X3-CPR produces 2,975 lumens and each LED25WRE-CPR produces 2,750 lumens of high-intensity LED light output with low voltage and amp draw, a 50,000 hour rated service life and 9 to 42 volt compatibility that provides operators with a versatile and powerful LED tractor lighting solution.
LEDEQ-3X3-CPR: This LED light bar is capable of emitting up to 2,975 lumens during operation. The 45-watt fixture features 9V-64V DC input voltages and an electric current of 2.8A. During output, the luminary shines a brilliant white light with a color temperature rating of 6,000-6,500K. The fixture is capable of withstanding rough treatment and immersions up to 3.3 feet (IP67 with air-breather design).
The LEDEQ-3X3-CPR light`s housing is made up of aluminum, while the lens is constructed of polycarbonate. This unit complies with CE, ROHS and E4 standards. It is IP67 certified, which provides complete protection from dust and water immersions up to 3.3 feet. This lamp uses Cree® LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree® LEDs generate a high lumens-per-watt ratio, effective lumen output and supports 70 percent lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources.
LEDEQ-3X3-CPR Mounting: It is mounted using a U-bracket style trunnion mount, making vertical light direction adjustments easy to implement.
LED25WRE-CPR: This ultra compact LED light produces 2,750 lumens with low voltage and amp draw, 50,000 hour service life and 12 to 32 volt compatibility providing operators with a versatile and powerful LED lighting solution.
The LED25WRE-CPR LED light from Larson Electronics produces 2,750 lumens of bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single Cree® 25 watt LED producing 2,750 lumens is combined with a high output reflector to produce a narrow 10 degree spread spot beam approximately 1000` long combined with a 60° flood beam. This combination spot and flood beam provides both distance and width from a single light source. This particular unit is ultra compact at 4.5" OD lamp head, 5.75 inches tall with mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium.
As well as unparalleled heat control, the LED25WRE-CPR LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Cree® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
LED25WRE-CPR Mounting: The LED25WRE-CPR LED lights feature a smaller profile and lighter weight than our LEDLB-E series lights, making them ideal for use in locations where traditional lights cannot fit or would block other mounted equipment. The LED25WRE-CPR is suspended within a form fitting trunnion (yolk-type) mount. This trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then retightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1/2-inch hole can be drilled.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Mounting: The LED lights in this cab light upgrade kit mount in existing lamp holders for halogen lamps on Caterpillar Cat Challenger MT 765B tractors. This means that this LED cab light upgrade kit is easy to install without any major modifications to the cab or body of the tractor.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|LLP-CAT-TR-MT765B-V1 LED Tractor Light Package
|LEDEQ-3X3-CPR LED Work Light Bar
|Lamp Type: LED Light Bar
|LED Type: Cree®
|Dimensions: 4.6" x 6" x 3"
|Input Voltage: 9V-64V DC
|Electric Current: 2.8 A
|Total Watts: 45
|Color Temp: 6000-6500K
|Lamp Life: 100,000+ Hours
|Lighting Configuration: Spot/Flood Options
|Housing Material: Aluminum
|Lens Material: Polycarbonate
|Mounting: U-bracket Trunnion
|LED25WRE-CPR LED Work Bar
-Scroll Down to Purchase-
|Lamp Type: Cree® LED
||Fast Average Current Control|
|Dimensions: 5.75" x 4.36"
||Programmable Off-Time Switching |
|Watts: 25 Watts
||Linear Dimming Input |
|Led Drive %: 90%
||Short Protection w/ Skip Mode|
|Voltage: 12-32V DC
||Ambient Op Temp -40°C to +85°C|
|Spot Beam: 1000` L
||Pin-Compatible with the HV9910B|
|Lighting Configuration: Combination 10° Spot & 60° Flood
||CE Certified |
|Mounting: Adjustable Bracket
||View Avg-Mode Driver Control PDF|
|Wiring: Deutsch IPD / LADD DT04-2P Connector
|Amps: 2.08 @ 12V DC - 1.04 @ 24V DC
||Special Orders- Requirements|
|LED Light Color: 6000K
||Contact us for special requirements |
|LED Life Expectancy: 50,000 Hours
||Toll Free: 1-800-369-6671|
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White