Made in the USA
The Larson Electronics MDC-208V-125MB-2X30A-10X20A-75C-IEC4P5W Mobile Distribution System distributes and steps down 208V AC electrical current to 120V AC. This power distribution system provides operators the ability to safely tap into 208V AC power from a variety of sources including generators and direct grid power. This portable system is suitable for outdoor applications.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, SPIDERBOX, OR SUBSTATIONS*
The MDC-208V-125MB-2X30A-10X20A-75C-IEC4P5W temporary power distribution system gives operators the ability to power their 208V and 120V equipment from a single system. Operators connect 208 volt using a 75` 2/5 Type-W line-in cord terminated in an IEC60309 120/208V 4P5W cord cap, which brings power into the system. Two L6-30R receptacles for 208V equipment and ten 5-20R GFCI duplex receptacles for 120V equipment are available for completing power connections.
Operation: A 75` 2/5 Type-W line-in cord terminated in male and female IEC60309 4P5W cord caps brings 208V power to the line-in receptacle on the main load center, which is protected by a 125-amp load center with main breaker for circuit protection. The 120/208V panel contains two 30-amp, 208V breakers protecting two 208V L6-30R receptacles, and ten 20-amp, 120V breakers protecting ten 120V 5-20R GFCI duplex receptacles. All receptacles are equipped with weatherproof covers.
The distribution assembly is mounted to a standard upright steel dolly cart, cross-style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat tires and a cart style mounting platform provides easier substation mobility. This temporary power distribution unit can be modified to meet the needs of job-site receptacle requirements. Full power distribution units are available up to 150kva and can be equipped with skids or trailer mounted.
Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.
Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~
Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.
Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or email@example.com to discuss your specific requirements.