Made in the USA
The Larson Electronics EPL-48-2L-LED-ILS-E2E-74INX2-EPP Explosion Proof LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light is daisy-chain capable and has a T-6 temperature rating. This LED carries a paint spray booth light certification as well, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.
This explosion proof LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. This unit comes fitted with 25' of 12/3 line-in cable terminated in a 20-amp explosion proof plug connected to an explosion proof switch that operates the light fixture. Another 74" of 12/3 SOOW cable connects the explosion proof switch to the light fixture itself and 74" of line-out 12/3 SOOW cord on the opposite end of the fixture connects the unit to a “double gang” 20-amp explosion proof receptacle. This switch operates the light only, not the explosion proof receptacle. This explosion proof LED has the ability to connect multiple units end to end, allowing operators to daisy chain multiple fixtures together for more light coverage along the job site. The EPL-48-2L-LED-ILS-E2E-74INX2-EPP is equipped with Larson Electronics’ specially designed LED T-series bulbs which produce 7,000 lumens, resulting in 30% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8's and have consistently surprised many of our customers with their unexpectedly high light output levels.
| Continuous Output Regardless of Switch Position |
This two lamp explosion proof LED linear fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.
This fixture carries a T6 temperature rating and is U.L. approved Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G. Click here to read the NEC description for explosion proof and hazardous locations.
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. An EPL-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC. The EPL-48-2L-LED-ILS-E2E-74INX2-EPP is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.
|Energy Consumption Comparison|
|Wattage||108 watts||64 watts||56 watts|
|Amp Draw @ 120V AC||0.90 amps||0.54 amps||0.47 amps|
|Amp Draw @ 220V AC||0.49 amps||0.29 amps||0.25 amps|
|Amp Draw @ 240V AC||0.45 amps||0.27 amps||0.23 amps|
|Amp Draw @ 277V AC||0.39 amps||0.24 amps||0.20 amps|
|Amp Draw @ 12V DC||9 amps||5.34 amps||4.67 amps|
|Amp Draw @ 24V DC||4.5 amps||2.67 amps||2.34 amps|
|Lamp Life Expectancy||20,000 hours||24,000 hours ||50,000 hours|
|Color Temperature||5000K / 4100K||4100K||5600K|
|Operation cost per year|
(12hs/day @ 12c/kWh)
Our EPL-48-2L-LED-ILS-E2E-74INX2-EPP LED light fixture is U.S. and Canada U.L. approved for use in paint spray booths.
Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
|Click Photos to Enlarge|
|5-15 Straight Blade Plug ||5-20 Straight Blade Plug ||6-20 Straight Blade Plug |
|Click Photo to Enlarge ||Click Photo to Enlarge |
Wiring & Plug: This unit comes fitted with 25' of 12/3 line-in cable terminated in a 20-amp explosion proof plug connected to an explosion proof switch that operates the light fixture. Another 74" of 12/3 SOOW cable connects the explosion proof switch to the light fixture itself and 74" of line-out 12/3 SOOW cord on the opposite end of the fixture connects the unit to a “double gang” 20-amp explosion proof receptacle. This set-up allows this unit to be connected to other lights or accessories and plugged into a single outlet. Plug options include a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets.
Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.
|Made in USA Quality||Superior LED Benefits|
|1. Each unit dialectrically tested.|
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for re-lamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
|1. 50,000 hour lifespan.|
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.