The Larson Electronics
GAU-HB-50LED-RT Low Bay light fixture provides operators with a powerful and
energy efficient alternative to traditional luminaries. LED technology and
compact design makes this lamp an excellent replacement upgrade option for bulky
and high maintenance cost older incandescent, metal halide and high pressure
industrial grade light fixture provides 4,333 lumens of high quality light while
drawing only 50 watts. The copper free aluminum alloy body is powder coated for
added durability and an attractive aesthetic appearance. Special heat
dissipating design in conjunction with LED technology helps this fixture to
achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light
weight and a low profile make this unit an attractive alternative to larger and
heavier older fixtures and requires less hardware to install. The
GAU-HB-50LED-RT low bay LED light also offers operators convenience in the form
of field serviceability.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no
filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce
light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied, providing instant illumination with
no warm up or cool down time before re-striking. Because there is no warm up
period, this light can be cycled on and off with no reduction in lamp
lights run at significantly cooler temperatures than traditional metal halide
and high pressure sodium lights and contain no harmful gases, vapors, or
mercury, making them both safer and more energy efficient. No extra energy is
wasted in cooling enclosed work areas due to external heat emissions from bulb
type lights, and the operator risks associated with traditional lighting
methods, such as accidental burns and exposure to hazardous substances contained
in the glass bulbs, are eliminated. In addition, LEDs are also safer for the
environment as they are 100% recyclable, which eliminates the need for costly
special disposal services required with traditional gas burning and arc type
LED Drivers: Even
in LED fixtures, heat is the single largest factor in premature light failure
and color shifting. As a result, many manufacturers reduce the output of their
LEDs in order to reduce the amount of heat produced. Rather than lower light
output or quality, Larson Electronics addresses this problem with the addition
of an electronic LED driver. This internal driver provides the ability to
automatically monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. This not only
reduces the energy dissipation, effectively lowering the operating temperature
of the fixture, but also prevents AC over-voltage and short circuit loading
making this fixture virtually maintenance free. Because the electronic driver
allows the GAU-HB-50LED-RT to run at a cooler internal temperature and regulates
the electrical current, energy efficiency and LED service hours are maximized
while at the same time reducing operating costs and downtime incurred from the
frequent servicing intervals required with other hotter running
light is universal voltage capable and can be operated with 100-277 VAC,
50/60Hz. We also offer a low voltage version of this LED fixture that operates
on AC/DC voltages from 11-25 Volts. This LED light fixture is IP67 rated,
dust-proof, and protected against high pressure jets and temporary submersion.
The cast aluminum body and LED lamp give this light excellent durability and
resistance to vibration and impacts. The housing is specially designed to
dissipate heat which increases the efficiency and lifespan of the LEDs and
GAU-HB-50LED-RT low bay LED light fixture is equipped with 10 feet of abrasion
and chemical resistant 16/3 SOOW cable with flying leads. The LED light fixture
features 5 3/4" NPT threaded ports for running conduit depending on the
installation location. Four of the ports are located on the corners of the unit
and the fifth port is found on the rear of the industrial grade low bay LED
|Amp Draw @ 120V
|Amp Draw @ 220V
|Amp Draw @ 240V
|Amp Draw @ 277V
|Amp Draw @ 12V
|Amp Draw @ 24V
|Operation cost per
(12hs/day @ 12c/kWh)
Each LED light fixture has the
potential to save $150.00+ per year in electricity alone, not including
maintenance costs, operational downtime, reduced productivity, HVAC loads, or
carbon footprint. When retrofitting an entire facility with 100s of light
fixtures, the return on investment of LED over metal halide becomes
LED light produces 4,333 lumens with a color temperature of 5600K and a color
rendering index of 75 which produces colors and details much more accurately
than high pressure sodium or mercury vapor luminaries. We also offer a 3000K
warm white and 4500K natural white color temperature options (longer lead times
may apply for non-standard temperatures). The GAU-HB-50LED-RT offers several
mounting options including ceiling mounting, pendant mounting, wall mounting and
cable mounting. The standard version of this LED fixture includes a pendant
mount and a surface mount option.
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message firstname.lastname@example.org
for more information about our custom options tailored to meet your specific
1. Low power consumption.
3. Fixture constructed of extruded corrosion resistant
copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS,
5. Retains 80% lumen output after 60,000 operating hours.
coated aluminum fixture body.
7. Pendant and Swivel Bracket mount
8. Low profile - Light weight
9. 4,333 Lumen output from 50
1. 60,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off - No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace