Made in the USA
The FTL-5-UV-LED-X24I-50 from Larson Electronics is a low voltage ultraviolet lighting solution that is UL 1598 listed for use in wet locations. This powerful 60" long LED UV strip light produces 14,000 mW radiant intensity, operates on 12 or 24 VDC, and is suitable for where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing, as well as food processing, vision systems, and automation systems. An inline encapsulated transformer allows this low voltage UV light strip from high voltage sources.
The FTL-5-UV-LED-X24I-50 is designed to provide a high output and ruggedly durable lighting solution for applications where ultraviolet light is needed. This low voltage UV light that emits light in the ultraviolet spectrum. This 365NM strip light can be operated on either 12 or 24 volt DC current and includes 50 feet of 16/3 SOOW cord that is terminated in choice of general area cord caps. The included inline encapsulated transformer steps down high voltage input current to operate this low voltage unit. The housing is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 60" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
The FTL-5-UV-LED-X24I-50 uses LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and light weight as well.
This LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing and inspection, and in paint, coating, and adhesive curing. The FTL-5-UV-LED-X24I-50 provides operators with a reliable and durable UV lighting solution that combines effective production of UV light with explosion proof protection and is applicable for leak detection, vision systems, automation systems, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Ultraviolet Wavelength: Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm spectrum. This explosion proof LED light has a peak wavelength of 365NM.
Durability: The FTL-5-UV-LED-X24I-50 LED UV light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered.
Mounting: This UV drop light comes standard with a set of drop hooks to allow users to conveniently hang the unit overhead anywhere illumination is needed. A machined handle at the base of the drop light allows the FTL-5-UV-LED-X24I-50 to be used as a handheld light fixture for spot illumination when needed. Each light is equipped with 50 feet of SOOW cable, making this drop light versatile and provides the operator with plenty of length for moving the light around the workspace.
Voltage: The internal driver in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These lights can operate on current ranging from 100 to 277V AC. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.
|Click Photos to Enlarge|
|5-15 Straight Blade Plug|
15 Amp / 125V Rated
|L5-15 Twist Lock Plug|
15 Amp / 125V Rated
|L6-15 Twist Lock Plug|
15 Amp / 250V Rated
| || |
|UK BS1363 Straight Blade Plug|
13 Amp / 250V Rated / Internal Fuse
|Intl Schuko 2-Pin Plug|
16 Amp / 250V Rated / Grounded
|Flying Leads / Pigtail Wires|
Wiring and Plug: This portable LED UV lighting system is equipped with 50 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. This unit also features an inline encapsulated transformer that steps down the input voltage to the low voltage required to power the UV light strip. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
|LED Lamp Benefits|
1. 30,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off - No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Specifications / Additional Information
|FTL-5-UV-LED-X24I-50 LED UV Light w/ 50ft Cord||Quick Summary |
Scroll Down to Purchase-
|Lamp Type: UV LED||Wet Area Approved|
|Dimensions: 60"L x 3"Dia||Food Safe|
|Weight: 7 lbs||30,000+ Hour Lamp Life|
|Voltage: 120-277 Volts AC, 50/60Hz||High Output LED UV Lamp|
|Total Watts: 40W||Internal LED Driver - No Ballasts|
|Total Intensity: 14,000 mW||Fluorescent Style LED Tube|
|Radiant Efficacy: 350 mW/w||Ships w/ Hanging Hooks |
|Lamp Life: 30,000+ Hours||Custom Cord Cap Options Available|
|Light Color: 365NM - Ultraviolet||50' SOOW Cable w/ Industrial Plug|
|Color Rendering Index: >80||UL 1598A Maine|
|Beam Angle: 100°|
|Power Efficiency: >95%|
|Power Factor: >0.992|
|Amps: 3.34 A @ 12V DC - 1.67 A @ 24V DC|
|Ambient Temperature Rating: -40°C to +65°C||Special Orders- Requirements|
|Mounting: C Hooks / Hand Held||Contact us for special requirements |
|Wiring: 50' 16/3 SOOW w/ General Area Cord Cap||Toll Free: 1-800-369-6671|
|Cord Cap: 5-15, 6-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail||Intl: 1-903-498-3363|
|Warranty: Yes - 3 Years||E-mail: firstname.lastname@example.org|
| || |