Made in the
This unit is for
Explosion Proof LED Light from Larson Electronics is rated Class 1, Divisions 1
and 2, Groups C and D and Class 2, Divisions 1 and 2. This portable LED flood
light includes a scaffold mount J-hook mount and portable pedestal mount. Both
mounts incorporate a high output Cree LED light head to produce 17,500 lumens of
light while drawing only 150 watts, and allow operators to easily swap the LED
fixture between mounts within the field.
RNT-EPL-16BSxJH-1X150LED-100 explosion proof LED light provides 10,000 square
feet of work area coverage with 17,500 lumens of light output. This portable LED
light provides two mounting systems. The scaffold mounting system consists of an
aluminum rail/ladder bracket that can be adjusted from 26 inches to 43 inches to
allow mounting to a wide variety of railings, scaffoldings or ladders with a
slip fit mounting system for the light head assembly to attach to the scaffold
mount. The portable base stand consists of a four leg aluminum base with a slip
fit style attachment for the light head bracket to attach to the pedestal base
stand. The LED light head produces a brilliant flood pattern of light that is
ideal for illuminating enclosed areas and hazardous locations where flammable
vapors, gases and dusts may be present. The two mounting platforms share one
light head that is swapped between the two mounts as needed. Often referred to
as simply a “tank light,” this unit is considered universal due to its ability
to be passed through any conventional manhole such as those found in
petrochemical containers and ship storage tanks.
LED light head is offered in a 60° narrow flood for greater distance and a 125°
wide flood that produces a brilliant flood pattern of light that is ideal for
illuminating enclosed areas and further adds to this units desirability as a
portable tank lighting solution. This explosion proof LED light fixture is
comprised of a 16" x 14" LED light head mounted within a rectangle frame
fabricated from non sparking aluminum. This frame features round tubing at the
top of the frame which acts as a carrying handle, allowing operators to remove
the light head frame assembly from one stand and move to another.
scaffold mounting system features adjustable J-shaped top and bottom hooks that
enables operators to securely mount the light to any ladder or scaffolding. The
pedestal base stand mount provides stable temporarily lighting in various
locations, as needed. Lamp adjustment is via an adjustable yolk that allows the
operator to position the lamp angle through a full 90 degrees of vertical
adjustment. All hardware on this unit is non sparking/corrosion resistant and
the power cord is chemicals and abrasion resistant.
Transferring the unit through
manholes consists of simply removing the light head from the mounting platform,
passing the light head and mount through the manhole separately, and then
reassembling the unit once inside. The lamp can be easily adjusted up or down 90
degrees and locked into position by simply loosening the two hand screws located
on either side of the light head and re-tightening them once the desired angle
is found. Included with this LED lighting system is 100 feet of SOOW cord, which
combined with the 90° of tilt offered by the LED light head and dual mounting
assemblies provide an effective alternative to often cumbersome explosion proof
The above images display the
EPL-JH16C-150LED-RT-100 illuminating a take with a 90` circumference at three
|Amp Draw @ 120V
|Amp Draw @ 220V
|Amp Draw @ 240V
|Amp Draw @ 277V
|Amp Draw @ 12V
|Amp Draw @ 24V
|Operation cost per
(12hs/day @ 12c/kWh)
Each LED light fixture has the
potential to save $150.00+ per year in electricity alone, not including
maintenance costs, operational downtime, reduced productivity, HVAC loads, or
carbon footprint. When retrofitting an entire facility with 100s of light
fixtures, the return on investment of LED over metal halide becomes
explosion proof LED light head in this unit features multiple LED drivers
which helps to increase the operational life of the fixture. With
traditional LED lights, in the event an LED array or driver fails, the entire
fixture no longer illuminates. This new series of LED lamps
contains twelve individual LED
boards configured in a series of banks. Each bank contains two LED boards
with an individual driver. In the event of a driver failure, only one bank of
LEDs will be effected while the other banks will continue to operate. In the
event that of an LED failure, the mating LED will continue to
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
Click Photos to
5-15 Straight Blade Plug
6-20 Straight Blade
LED light produces 17,500 lumens with a color temperature of 5000K, 4000K,
or 3000K and a color rendering index of 75 which produces colors and details
much more accurately than high pressure sodium or mercury vapor luminaries. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen
output after 60,000 hours of use, far longer than incandescent or fluorescent
|Made in USA
1. Approved Class 1 Div1-2 Class2 Div
2. Led lamp head requires no lamping.
3. Durable Scaffold
& Base Stand Mount constructed of copper free aluminum.
ballast box. No ballast to replace.
5. Extreme long life LEDs
reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 17,500 Lumens produced from only 150 watts.
8. Mercury free shock
proof LED lamp light head.
1. 60,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
UV light, infrared radiation or CO2 emissions.
6. Bright, even light
maintains consistent color over time.
7. Instant on/off – No flickering,
delays or buzzing.
8. Very good color rendering.
10. Significantly cooler operation.
11. Less frequent outages,
higher output improves workplace
Specifications / Additional
|RNT-EPL-16BSxJH-1X150LED-100 Explosion Proof LED
Scroll Down to
United States - Canada
||Listed for United States and
|Lamp Type: Cree
||Class I, Divisions 1 & 2, Groups C and D|
|Dimensions: 14" x 16" Light head
||Class II, Divisions 1 & 2, Groups E,F,G|
lbs (Base Stand) / 60 lbs (Scaffold Mount)
||Class III, Divisions 1 & 2|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC
||Certified to UL 844 Ed. 13|
||Certified to UL 1598|
|Total Lumens: 17,500
||Certified to C22.2 No. 137 Rev 2009|
|Luminous Efficacy: 116.67 Lm/W
||Certified to C22.2 No. 250.0|
8500@ 1 Meter 1250@ 3 Meters
||T5 Temperature Rating|
|Lamp Life: 60,000+ Hours
||Paint Spray Booth Approved|
5000K, 4000K, 3000K
||IEC 60529 Tested|
Index: >75 CRI
||IP67 Rated Waterproof|
60° or 125°
||Multiple Driver Banks|
|Power Efficiency: >95%
||80% Lumen Retention after 60,000 Hours|
|Power Factor: 0.992
||Factory Sealed Light Fixture|
|Ambient Operating Temp
Range:-50° C to +65°C
||100 Foot SOOW Cable|
||Scaffold Mount Adjustable 26-43"|
Material: Copper Free Cast
||Base Stand Provides Portability within Work
|Lamp Housing Finish: Epoxy
Powder Coated - Grey
||Dual Mounting System - Scaffold/Base Stand|
|Lens Material: Hardened
||Direct Replacement for 400W MH Lighting|
||Made in the USA|
|Mount Material: Non-Sparking
|Mount Finish: Powder Coated -
|Mounting: Aluminum Scaffold J-Hook & Base Stand Mounts
||Contact us for special requirements|
|Wiring: 100` 16/3 SOOW w/ EXP Cord Cap
||Toll Free: 1-800-369-6671|
|Cord Cap: 5-15, 5-20, or 6-20
Monthly, Weekly, Daily
Rentals: In an effort to cut back
on contracts and various other paper work, Larson Electronics processes rentals
like purchases until the product is returned. (Rent to Own Rates) This means, we
will charge the customer for the product total and credit back the difference
once the fixture is returned. Weekly and Monthly terms are available. Customer
must pay shipping to and from the destination. Please contact us at (903)
498-3363 for further information if required.
Rental Prices for the
Subtract rental cost from total cost for the
amount that will be credited back to customer upon return of product. Customer
can choose to convert their rental to a purchase at any time during the rental
period. When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.