The HMLED-WP60E-25 from Larson Electronics is a Magnetic LED Flood Light that features a convenient control handle for aiming the 5,400 lumens produced by the light head which draws only 60 watts and 0.5 amps at 120V AC. A single 200 lb magnet mounted on the base of the flood light allows operators to quickly and securely mount the unit on flat magnetic surfaces. The HMLED-WP60E-25 is an ideal alternative to halogen and metal halide flood lights and produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting.
Light Features: The light head on the HMLED-WP60E-25 consists of six LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. An optional glare shield it shipped with this light.
The light assembly consists of six LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45° offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. With the HMLED-WP60E-25 there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation.
The HMLED-WP60E-25 light head is designed to operate on any voltage ranging from 100-277V AC, 50/60Hz or 11-25V AC/DC. The light can be configured in either a 60° or 75° beam angle and is available in the following color temperatures: 5600K, 4000K, or 3000K. Make your desired selection for each option below when ordering.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
|Click Photos to Enlarge|
|5-15 Straight Blade Plug|
15 Amp / 125V Rated
|L5-15 Twist Lock Plug|
15 Amp / 125V Rated
|L6-15 Twist Lock Plug|
15 Amp / 250V Rated
| || |
|UK BS1363 Straight Blade Plug|
13 Amp / 250V Rated / Internal Fuse
|Intl Schuko 2-Pin Plug|
16 Amp / 250V Rated / Grounded
|Flying Leads / Pigtail Wires|
Wiring/Plug: This waterproof LED flood light fixture is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.
Mounting: This light is mounted to a 3.25 inch diameter magnetic base with 100lbs of grip and an impact resistant plastic handle for simple placement on any ferrous metallic surface and easy operation. The stainless steel hinge assembly on this unit allows the light angle to be adjusted for optimal light control. The adjusting hinges on this light are tensioned, allowing the user to simply position the light as desired without any need for locking the unit into place. Once positioned, the light will hold its position until the user again repositions it.
|High Quality Features||Superior LED Benefits|
1. Low power consumption.
2. Instant on/off operation.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS, MH.
5. Retains 70% lumen output after 50,000 operating hours.
6. Powder coated aluminum fixture body.
7. Pendant and Swivel Bracket mount included
8. Low profile - Light weight
9. 2,250 Lumen output from 25 watts
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off - No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|HMLED-WP60E-25 Magnetic LED Flood Light||Quick Summary|
Scroll Down to Purchase-
|Lamp Type: Cree LED||Waterproof/Vapor Proof|
|Dimensions: Light Head: 9"W x 3.25"D x 6.5"H||Impact/Vibration Resistance|
|Weight: 10 lbs||Shatterproof Lens|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC||Ambient Op Temp -25°C to +60°C|
|Watts: 60W||50,000+ Hour LED Life|
|Lumens: 5400||ETL Approved for Wet Locations|
|Luminous Efficacy: 90 Lm/W||Extremely Durable and Versatile|
|LED Life Expectancy: 50,000+ hours|
|Color Temperature: 5600K, 4000K, or 3000K|
|Color Rendering Index: 80|
|Beam Angle: 60° Vertical or 75° Horizontal|
|Lighting Configuration: Flood Beam|
|Power Efficiency: >95%|
|Power Factor: 0.992|
|Amps: 0.5A @ 120V, 0.25 @ 240V, 0.22 @ 277V|
|Ambient Operating Temp Range: -25°C to +60°C|
|Waterproof Rating: IP67|
|Vibration Resistance: 15.6Grms|
|Wiring: 25` 16/3 SOOW Cord w/ General Area Cord Cap|
|Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail|
|Housing Material: Die Cast Aluminum||Special Orders- Requirements|
|Lens Material: Polycarbonate||Contact us for special requirements |
|Waterproof Rating: IP68||Toll Free: 1-800-369-6671|
|Mounting: 200 lb Magnet Base w/ Ergonomic Control Handle||Intl: 1-903-498-3363|
|Warranty: Yes - 3 Years*||E-mail: firstname.lastname@example.org|
| || |