Made in the USA
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO SOLAR CONTROL SYSTEMS*
The SCS-60A-24-4X250AH solar controller and charging station provides operators with an effective way to manage off grid solar charging systems. In this 24 volt system solar control system, each panel is terminated with a fused combiner box with a single lever action cut-off switch. With the switch set to the `on` position, the combiner box passes power to the 60-amp capacity Morningstar Tristar charge controller. The SCS-60A-24-4X250AH includes a battery bank with (4) 8D 250aH batteries.
The SCS-60A-24-4X250AH solar job box uses the Morningstar Tristar series since it standard temperature threshold is more than 140 degrees Fahrenheit, due to its integrated heat sink and fan assembly. Oddly enough, most charge controllers aren`t rated past 104 degrees Fahrenheit despite the fact the will always be close to direct sunlight. In the summer time in Texas, our fabrication shop is normally warmer than that, so this solar light tower uses a charge controller that would support the southern heat. We improve on that capability by shading the charge controller and adding additional air flow from the exhaust of a 1400 CFM component cooling system.
Component Control Center: In order to ensure that the 50% threshold on the batteries is controlled, this solar trailer includes a system of min/max voltage sensors and relays that monitor the voltage produced by the batteries and will automatically shut off power distribution when the battery capacity falls below 50%. This protects the batteries from failure.
All the electrical components, including the combiner panel, charge controller, over/under battery monitoring and ground fault isolation are encapsulated in a Nema 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The component control center also includes a terminal block so that customers can mount additional electronic gear without interfering with the charging systems. The job box that contains the component control system includes locks for security purposes.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Specifications / Additional Information
|SCS-60A-24-4X250AH Solar Charger Control System
-Scroll Down to Purchase
|Panel protection: Fused combiner box
||Morningstar Tristar Charge Controller|
|System Protection: Battery over/under and ground fault
|Batteries: (4) 8D 250aH Batteries
|Amp Rating: 60
||Special Orders- Requirements|
|System Voltage: 24 Volts
||Contact us for special requirements |
||Toll Free: 1-800-369-6671|
|Dimensions: 48"L x 24"W x 30"H