from Larson Electronics is an Explosion Proof LED Light Fixture that operates on
120-277V AC that is stepped down to 12V DC or 24V DC via an inline transformer
and that produces 2750 lumens while drawing only 12 watts. The
EXHL-TRN-LE1-XLV-M-100 is Class I, Divisions 1 & 2, Groups B, C, D, Class
I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E,
F ,G and Class III Divisions 1 & 2 rated for hazardous areas and is listed
for use worldwide including the United States, Canada, Europe and Asia. This
explosion proof LED light fixture also features an adjustable trunnion mount
supported by a single 200-lb grip magnet, allowing operators to tilt the light
EXHL-TRN-LE1-XLV-M-100 produces 1,320 lumens of high-intensity LED light for
illumination within hazardous areas and potentially explosive work environments.
This explosion proof LED light fixture operates on voltages ranging from
120-277V AC. This input voltage is then stepped down to either 12V DC or 24V DC
to operate the light via an inline transformer. The transformer is encapsulated
to make it weatherproof, but it is NOT explosion proof and must remain located
outside of the hazardous area. With 100` of 12/3 SOOW cable between the light
and the encapsulated transformer, there is plenty of room to move around the
hazardous work area while keeping the transformer in a safe location. The
EXHL-TRN-LE1-XLV-M-100 is available in two lighting configurations; spot and
flood. The spot configuration features a 10° beam that measures 800`L and 140`
W. The flood configuration throws a 40° beam that measures 300`L and
explosion proof LED fixture is supported by an adjustable trunnion mount with a
200-lb grip magnet. Operators may securely and quickly mount the light on a
magnetic surface for hands-free lighting in hazardous locations and confined
spaces. After mounting, operators can adjust the angle of the LED fixture by
tilting the light head up and down to reach the desired position. This versatile
mounting system is ideal for industrial work that requires gloves, as an opening
between the grip magnet and the light (through the opening of the trunnion
mount) is available. When a gloved hand is supporting the light through the
opening of the trunnion mount, operators may use the LED fixture as a handheld
unit for robust control.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no
filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce
light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied, providing instant illumination with
no warm up or cool down time before re-striking. Because there is no warm up
period, this light can be cycled on and off with no reduction in lamp
lights run at significantly cooler temperatures than traditional metal halide
and high pressure sodium lights and contain no harmful gases, vapors, or
mercury, making them both safer and more energy efficient. No extra energy is
wasted in cooling enclosed work areas due to external heat emissions from bulb
type lights, and the operator risks associated with traditional lighting
methods, such as accidental burns and exposure to hazardous substances contained
in the glass bulbs, are eliminated. In addition, LEDs are also safer for the
environment as they are 100% recyclable, which eliminates the need for costly
special disposal services required with traditional gas burning and arc type
Heat is the single largest factor in premature LED failure and color shifting.
These LED units contain advanced drivers which use pulse width modulation to
control heat buildup rather than simple voltage regulators which are typically
harsh on sensitive electronics and can contribute to early LED failure. These
units automatically sense the temperature of each LED and adjust the energy
frequency or "duty cycle" accordingly to maintain heat levels within acceptable
ranges. This system in essence flashes current at an extremely fast on and off
rate to each LED based upon the LED`s core temperature. This flash rate is too
fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be
driven at up to 100% capacity without overheating or visible loss of light
output. The LEDs are always driven at the same voltage but the duty cycle,
however, is changed to alter how long the LEDs are actually on or off. The end
result is more light with less heat and longer LED life with an average 70%
lumen maintenance after 50,000 hours.
Click Photos to
5-15 Straight Blade Plug
15 Amp /
L5-15 Twist Lock Plug
15 Amp /
L6-15 Twist Lock Plug|
15 Amp /
UK BS1363 Straight Blade Plug
Amp / 250V Rated / Internal Fuse
Intl Schuko 2-Pin Plug
16 Amp /
250V Rated / Grounded
Flying Leads / Pigtail
explosion proof LED light fixture is equipped with 10 feet of 16/3 chemical and
abrasion resistant SOOW cord between the transformer and cord cap. The cord cap
is an industrial grade cord cap for easy connection to common wall outlets. Plug
options include standard 5-15 15 amp straight blade plug for 110V wall outlets
with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets
with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA
L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp
fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko
plug with ground contact and socket for European outlets up to 250V.
Alternatively, we can provide flying leads with no plug for hard wire
applications or for operators who prefer to wire in user provided cord caps.
Please choose pigtail option below for flying leads with no
*PLEASE NOTE: WHILE THE LIGHT
ITSELF IS EXPLOSION PROOF, THE INCLUDED STEP DOWN TRANSFORMER IS NOT AND
MUST REMAIN OUTSIDE THE HAZARDOUS AREA*
EXHL-TRN-LE1-XLV-M-100 explosion proof LED light fixture from Larson Electronics
is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) anddesigned to withstand
the rigors of demanding of environmental and operating conditions while
remaining lightweight and easy to use. These units can operate in temperatures
of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of
dust, dirt and humidity. The housings are formed from extruded aluminum and the
lenses are unbreakable polycarbonate. The LEDs offer inherent LED resistance to
shocks and vibrations.
1. Low power consumption.
2. Instant on/off
3. Fixture constructed of extruded corrosion resistant copper free
4. Superior color rendering compared to HPS, LPS, MH.
Retains 70% lumen output after 50,000 operating hours.
6. Powder coated
aluminum fixture body.
7. 5" ergonomic handle included
8. Low profile -
9. 1,320 Lumen output from 12 watts
1. 50,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off - No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message firstname.lastname@example.org
for more information about our custom options tailored to meet your specific
Specifications / Additional
Explosion Proof LED Light Fixture w/ Adjustable Magnetic Trunnion
Scroll Down to
||Listed for United States, Canada, Europe,
8"L x 6"W x 14"H
||Class I, Div. 1 & 2, Groups B, C, D|
||Class I, Zones 1 & 2, Groups IIB+H2, IIA|
Stepped Down to 12V DC or 24V DC
||Class II, Div. 1 & 2, Groups E, F ,G|
||Class III, Div. 1 & 2|
|Luminous Efficacy: 110 Lm/W
||NEMA Type 3, 4, 4X, 7 (B,C,D), 9 (E,F,G)|
|LED Light Color: 6000K - White
||ATEX Ex II 2 G / D|
|LED Life Expectancy: 50,000 hours
||IECEx db IIC Gb|
Configuration: 10° Spot or 40° Flood
||IECEx tb IIC Db IP66|
800`L x 140`W
300`L x 225`W
|Ambient Operating Temp Range:
-40°C to +60°C
12/3 SOOW Between Transformer & Light - 10` 16/3 SOOW Between Transformer
& Cord Cap
|Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl.
|Housing Material: Aluminum
|Housing Color: Powder Coated - Grey
||Contact us for special requirements |
|Lens Material: Polycarbonate
||Toll Free: 1-800-369-6671|
Adjustable Trunnion Mount w/ (1) 200-lb Grip Magnet
|Warranty: Yes - 1 Year*