Made in the USA
The Larson Electronics EPL-SL-10-LED-50-NP Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection. This explosion proof string light has a 50` 12/3 SOOW line-in cord with blunt cut end for customer provided cord caps.
Click here to see the Incandescent version of this light
This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and connected in series along 90 feet of 12/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 14/3 SOOW cord connecting a single drop light to the backbone. The cord on this unit is terminated in a Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 50 foot tail section of main SOOW cord is included to allow ample length for connection to power sources.
10 Watt LED Bulb
Molded T Connector w/ Hook Ring
25` whip w/ EXP Plug
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge |
100 Watt Incandescent Bulb
With the EPL-SL-10-LED-50-NP
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to suspend the entire backbone off the ground and out of the work space.
This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below. A 50` 12/3 SOOW input whip with blunt cut end allows operators to install customer provided cord caps..
|Stringer Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
(8hs/day @ 11c/kWh)
|Made in USA Quality
1. Federal Spec Cord.
2. Explosion Proof.
3. Total of (10) 10 watt LED Lamps.
4. Non-sparking aluminum construction.
5. UL Class 1 Div 1 Class 2 Div1
7. 120-277V AC or 11-25V AC/DC Operation
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
100 watts of LED illumination
Non-sparking aluminum housings
Light weight mold T Junctions
Cast aluminum guard prevent lamp or globe damage
Tempered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable
Specifications / Additional Information
Scroll Down to Purchase-
|Listing: United States
||Class 1, Divisions 1 & 2, Groups C, D |
|Dimensions- Each Lamp: L-16.5" Diam-5"
||Class 2, Divisions 1 & 2, Groups, F, G |
|Total Watts: 100
||Class 1, Zone 1, Group IIB|
|Single Lamp Watt: 10 watts
|Voltage: 120-277V AC or 11-25V AC/DC
|Amps: 0.84 120V AC
|Mounting: Handheld / Hanging via Aluminum Hooks
|Wiring: 140` 12/3 SOOW Cable - 10` between lamps - 50` input whip
||Special Orders- Requirements|
|Cord Cap: Custmoer Provided
||Contact us for special requirements |
|Total Length: 140`
||Toll Free: 1-800-369-6671 |
|Single Lamp Weight: 6 lbs
|Total Weight: 75 lbs