This unit is for
The RNT-WAL-ML-4X400LTL-LED 2000
Watt LED Mini Light Tower on Non-Towable Wheeled Cart from Larson Electronics is
an ideal solution for operators who need a fully portable yet easy to operate
light system capable of illuminating large areas. Adjustable from 7 to 12 feet
in height above the cart deck and equipped with four 500 watt LED lamps, this
unit will provide over 270,000 lumens of quality illumination.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
The RNT-WAL-ML-4X400LTL-LED mini
light tower with wheeled based is a portable lighting system designed high
mobility while providing enough output to illuminate approximately 3 acres of
area effectively. Equipped with four 500 watt high output LED lamps, this mini
tower provides operators with an easily deployed lighting system that can
provide large scale illumination. This crank-up style light mast allows
operators to extend the light mast from 7` to 12` above the deck of the pull
around cart, elevating the light heads to heights over 14.5` above ground
portable LED lighting system is comprised of four adjustable LED light heads
mounted atop a telescoping mini light tower mounted to a wheeled cart base. This
adjustable and collapsible tower can be extended to twelve feet, collapsed to
seven feet, and includes four wheels allow the operator simply roll the entire
assembly to a new location when fully deployed. The LED light fixture assembly
can be removed by releasing the hand knob and sliding the light and mounting
bracket off of the center support, aiding in deployment, storage and transport.
The lamp can be easily adjusted vertically and locked into position.
Forty-Eight CREE® high output LEDs
producing 1,406 lumens each are arranged in rows and paired with PMMA high
purity optics to produce a well focused 24° wide spot beam that is ideal for
providing far reaching concentrated illumination while still covering a
substantial amount of area. We also offer optional optics with 10° spot, 38°
narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are
tightly focused and are designed for high elevation mounting to achieve
distance, making spot versions ideal for high mast and spots lighting. The flood
beams are designed to provide more light over a larger area nearer the fixture,
making flood versions ideal for use as dedicated work and area lights.
RNT-WAL-ML-4X400LTL-LED mini light tower features an extendable tower assembly
that can be adjusted from 7 to 12 feet in height for maximum coverage. A single
hand crank allows operators to easily raise or lower the tower as needed, and a
removable lamp mounting platform allows removal of the lamp assembly for easier
transport and storage. The tower is constructed of heavy gauge steel for
durability, and a tough powder coat finish provides protection against rust and
corrosion. The base of the tower is fitted with two solid wheels to allow easy
positioning; the operator can simply tilt the unit back and roll it into the
desired location as needed.
lighting system on this unit is comprised of four of our GAU-LTL-500W-LED
500 watt LED lamps producing 67,500 lumens of light attached to the top of the
mini light tower. The GAU-LTL-500W-LED LED lights are ideal replacements for
fragile and hot running 1000 watt metal halide lamps, offering increased
durability, longer lamp life, and lower power consumption. The fixtures are IP67
rated waterproof. The LED assembly is comprised of multiple LED "strips" within
the housing. This design allows for in-the-field serviceability without the need
for special tools or equipment.
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
drivers in this unit provide the ability to automatically monitor and adjust
input current to maintain the correct LED voltage levels regardless of input
levels across a specific range. These light towers can operate on current
ranging from 90 to 305V AC or 127 to 431V DC without any modifications necessary
as a result. This ability to sense and adjust input current also provides
protection against voltage spikes and drops that can occur in electrical systems
which would otherwise result in burning up or premature LED failure without
Click Photos to
5-20 Straight Blade Plug
L5-20 Twist Lock Plug
L6-20 Twist Lock Plug|
Flying Leads / Pigtail Wires
Wiring and Plug:
This cart mounted LED light tower flood lighting system is equipped with 100
feet of 12/3 chemical and abrasion resistant SOOW cord that is fitted with an
industrial grade cord cap for easy connection to common wall outlets. Plug
options include standard 5-20 20 amp straight blade plug, NEMA L5-20 20 amp
twist lock plug, NEMA L6-20 20 amp twist lock plug. Alternatively, we can
provide flying leads with no plug for hard wire applications or for operators
who prefer to wire in user provided cord caps. Please choose pigtail option
below for flying leads with no plug.
The deck of the pull around cart
features enough room for user provided generators or tool boxes. Alternatively,
Larson Electronics can equip this unit with a single 3000 VA gasoline generator
is mounted to the base of this tower to provide standalone power for the LED
lamps and allows for quiet operation and 10 or more hours of run time on a
single tank of fuel. This generator also includes standard 120 and 240 volt
outlets for accessory attachments, allowing operators to run tools and other
equipment while also operating the lights. Larson Electronics is a manufacturer
and as such offers a variety of custom options including different lamp wattages
Please contact email@example.com or
call 1-800-369-6671 for custom options.
|Made in the USA
1. High Efficiency LED Lamps.
2. (4) 500 Watt
Lamps Producing 270,000 Lumens.
3. Powder Coated Steel Frame.
Transparency PMMA Lenses.
5. Vertical Adjustable.
6. Heavy Wheeled
7. 100` 12/3 SOOW Cable w/ cord
8. Adjustable Lamp Brackets.
1. 80,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
UV light, infrared radiation or CO2 emissions.
6. Bright, even light
maintains consistent color over time.
7. Instant on/off – No flickering,
delays or buzzing.
8. Very good color rendering.
10. Significantly cooler operation.
11. Less frequent outages,
higher output improves workplace