LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Durability-Convenience: The HUL-LEDP1X10W-DIMM-110V dimmable spotlight is constructed of impact resistant materials including an aluminum housing and polycarbonate handle. The lamp assembly contains an aluminum reflector and borosilicate impact and scratch resistant polycarbonate lens. The lamp assembly is sealed against water and dust and the entire unit is IP68 rated waterproof to 3 meters.
Power: The HUL-LEDP1X10W-DIMM-110V comes with 20 feet of 16/2 SOOW straight cord between the spotlight and PWM inline dimmer along with a waterproof 120-277V AC inline transformer and 5 feet of 16/3 SOOW cable between the transformer and the included general area cord cap. This setup allows the HUL-LEDP1X10W-DIMM-110V dimmable LED spotlight to be used with standard wall outlets. Operators may disconnect the transformer from the unit for 12-32V DC operation including 12V and 24V DC allowing it to be used with any vehicle or ATV equipped with a low voltage DC power source. The PWM dimmer must remain connected for the spotlight to retain the dimming capablities the inline dimmer allows for.
Dimmer Information: The dimmer included with this unit is a Pulse Width Modulator Controller designed to dim the LED light of the HUL-LEDP1X10W-DIMM-110V. Basically, this is a voltage regulator for LED lights drawing 12 amps or less. PWM controllers are CPU controlled, digital alternatives to resistance based rheostats. This PWM controller has a rotating switch that enables the operator to control the brightness of the LED light. Thus, many operators will use this as a "dimmer" switch. It produces 135Hz and is equipped with male and female 2 pin Deutsch connectors so that it can be used inline. This PWM can be used as a handheld or it can be surface mounted. Mounting ears extend from the unit to enable operators to surface mount the unit.
|Click Photos to Enlarge|
|5-15 Straight Blade Plug|
15 Amp / 125V Rated
|L5-15 Twist Lock Plug|
15 Amp / 125V Rated
|L6-15 Twist Lock Plug|
15 Amp / 250V Rated
| || |
|UK BS1363 Straight Blade Plug|
13 Amp / 250V Rated / Internal Fuse
|Intl Schuko 2-Pin Plug|
16 Amp / 250V Rated / Grounded
|Flying Leads / Pigtail Wires|
Wiring/Plug: This general area dimmable LED spotlight is equipped with 5 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.
Versatility: The entire unit weighs only 1.2 lbs. The light head is mounted to the handle with an adjustable hinge that allows the head to be adjusted vertically. The five inch tall handle is ergonomically designed to fit the contours of your hand for a comfortable grip. This unit is ideal for hunting as well as military, security and law enforcement use and any application that requires an extremely durable and effective source of portable illumination.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.