MPD-208Y.120V-112.5KVA-480V-4X20A.120V portable power distribution system is
designed to enable operators to connect to 208Y/120V three phase primary voltage
and step it up to 480V three phase to operate lights and equipment. On the
primary side, operators can connect up to four 120V, 20-amp devices. On the
secondary side, 480V three phase power is made available via 20` of 1/0 cord.
This versatile system enables operators to make the most of a single 208Y/120V
3-phase connection via an operator provided line-in cord.
*PLEASE NOTE: ANY FREE
SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR
customer provided line-in cord brings 208Y/120V three phase power to the NEMA 3R
400-amp main breaker panel. This main panel contains four 20-amp, 120V breakers
protecting four 20-amp, 5-20R duplex receptacles, and one 350-amp breaker
protecting the transformer. All receptacles are equipped with waterproof
covers. The NEMA 3R transformer steps up
208Y/120V three phase power to 480V three phase and passes the current to the
secondary side. The secondary side of the transformer feeds a NEMA 3R 200-amp,
480V 3-phase fused disconnect, which contains three 150-amp time delay fuses
protecting the 480V line-out service. Line-out service is provided via 20` of
1/0 4C Type-W cord with blunt cut end.
Unlike many portable power distribution boxes made of plastic and
utilizing thin gauge, low grade metals in their construction, this unit is
designed for serious use and is ruggedly constructed to withstand demanding
conditions and heavy duty industrial applications. The transformer and load
assembly is mounted on a 3/16" thick carbon steel mounting platform and the load
center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square
carbon steel tubing frame, resulting in an extremely stable, durable and well
protected power distribution platform. This model is equipped with forklift skid
pockets, locking polyurethane casters, and a top located lifting eyelet which allows
easy lifting with cable or chain hooks. This can be replaced
for an additional cost with stainless
steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be
equipped with skids or trailer mounted.
Transformer is grounded to the frame and we provide a grounding lug on
the frame for the earth ground.
~Please check all motor loads for dual rated
motors that will work 208 or 240.~
power distribution system is ideal for indoor or outdoor use and applications
including but not limited to, construction sites, plant maintenance, plant
turnarounds, shows, exhibits, and shipyard operations. These power distribution
systems are popularly used in applications where external power sources are
often necessary. We also offer class rated transformers for use within explosion
proof and hazardous location environments.
Custom Built Systems
Available: Larson Electronics is a manufacturer and we can build
portable power distribution systems to your specifications. Although we carry
several models of portable power distribution systems in stock, we can deliver
custom ordered units almost as quickly as our prebuilt units. If this model does
not meet your needs, please contact us at 1-800-369-6671 or email@example.com to
discuss your specific requirements.